bing tracking image

Filter Questions and Answers:

reset filter
Throttle Body Spacer
Throttle Body Spacer
 

Expert Answers about Throttle Body Spacer


  • Throttle Body Spacer and Cold Air Intake Recommendation for a 2014 Ford Mustang 3.7 Liter
  • I have a solution for your, but the part # AR450-638 that you referenced would be for the 5.0 liter 2014 Ford Mustangs. Since you have a 3.7 liter you instead would want the part # AR450-636. I confirmed this with AirAid. I attached installation instructions for you to check out as well. This product would also be compatible with your AirAid Cold Air Intake like part # AR451-265 or # AR450-265.
    view full answer...

  • Throttle Body Spacer and Cold Air Intake Recommendation for a 2016 Jeep Wrangler Unlimited
  • The Airaid PowerAid Throttle Body Spacer part # AR300-637 has been confirmed as a fit for your 2016 Jeep Wangler. I would recommend the Airaid MXP Cold Air Intake System with SynthaMax Dry Filter # AR312-132 which has been confirmed as a fit for your vehicle as it has a dry filter which will be easier to clean. If you plan to go off-road a lot and would see a lot of dust an oil-based filter would be a better option though. For that you would need the part # AR310-132.
    view full answer...

  • What Type of Fuel Mileage Savings will the Airaid Throttle Body Spacer # AR1002 Give my 2004 F-150
  • While I am normally very skeptical of fuel savings products like the # AR400-516 that you referenced. We had a customer come back and tell us that after monitoring their fuel mileage for the first 1,000 miles of their road trip without the # AR400-516 they noticed an additional mile per gallon on the next 1,000 miles of the trip with the # AR400-516 installed. While we can't absolutely guarantee you will see the same result I would be very surprised if you didn't see the same results...
    view full answer...

  • Troubleshooting Check Engine Light After Install of Throttle Body Spacer
  • I've had similar issues before installing intake modifications on a vehicle and the issue was that I forgot to plug in all of the sensors that had to be unplugged to perform the install. I'd go over the install again looking for anything left unplugged or other anything else that may not be fully seated. Also make sure the gasket is sealing properly.
    view full answer...

  • Airaid Throttle Body Spacer Availability for 2016 Toyota 4Runner
  • For your 2016 Toyota 4Runner the AirAid Throttle Body Spacer part # AR510-628 has been carried over as a confirmed fit. We confirmed this with our contacts at AirAid. I attached an install video for more info for you to check out as well.
    view full answer...

  • Recommended Throttle Body Spacer For 1996 Chevrolet C3500
  • Installing a new clutch fan would not likely increase your fuel economy on your 1996 Chevrolet C3500, but we may have an option for you. I recommend installing a new throttle body spacer like part # AR200-530. This helps with horsepower and torque enhancement and does help with fuel economy as well. The installation instructions are attached you can check out.
    view full answer...

  • Would Throttle Body Spacer Void Vehicle Warranty
  • A throttle body spacer like the part # AR200-630-1 should not void your engine warranty. But I would recommend you check with a GM dealer. When you install an aftermarket part on your vehicle likethis, you are protected by the Magnuson–Moss Warranty Act. This act states, in part, that unless the installation and the part caused a problem then the warranty cannot be voided. I recommend looking it up online. This product is 50 state legal too which means it passes CARB standards. It...
    view full answer...

  • How Does the Airaid EconoAid Custom Throttle Body Booster Install
  • The install for the # AR400-516 would be exactly how you described. You would just need to unbolt your throttle body so that you can install the gasket and spacer between the manifold and it and then reinstall everything. I attached a diagram for you to check out as well.
    view full answer...