On the inside of the tailgate the Putco Tailgate Cap part # P52617P goes down about 1 inch from the top of it. I attached a picture that shows you what the inside portion looks like. view full answer...
We have just what you're looking for, the Putco Stainless Steel Tailgate Cap, part # P51617P.
The cap is manufactured in the US, and carries a lifetime warranty. The cap installs using the included hardware. view full answer...
For your 1999 Ford Ranger with a 6 foot bed we have the Putco truck bed rail skins part # P59578 which is a chrome cover for the top of the bed rails that has open stake pockets like you mentioned wanting. This will fit over your bed rails and has cut outs to give you complete access to the stake pocket holes. view full answer...
Putco only overs the rails like part # P59582 with stake holes like you mentioned so best option would be stake pocket covers like the part # TX1704210 which you could use to cover the holes. view full answer...
Yes, as long as the bed rail covers don't obstruct the opening of the stake pockets the Putco Locker Truck Bed Side Rail Covers # P49833 will work well. At worst you may have to trim the bed rail cover. view full answer...
It sounds like you are looking for the Putco Tailgate Cap # P51617P which is confirmed to fit the tailgate on your 2005 Chevrolet Silverado Short Bed and is made out of 17 gauge stainless steel making it just under 1/16" thick.
The # P51617P hangs down about 4" which will be able to cover the bolt holes mentioned.
view full answer...
We do have the components you are looking for on your 1996 Dodge Ram 1500 short bed, however there isn't anything available in aluminum diamond plate.
The best options we have available for your truck are the Putco Full-Coverage Front-of-Bed Protector # P59122 and the Full-Coverage Tailgate Protector # P59118, both of which feature a stainless steel construction that will be completely resistant to rust and corrosion.
There aren't any standard side rail caps available but we do have... view full answer...
The Putco Locker Truck Bed Side Rails # P89896 are confirmed to fit your 2017 Chevrolet Silverado 2500 HD 6-1/2' bed. The bars have a diameter of 1-3/4" and the bars do not overhang over the bed itself or outside of the bed rails. There is not a matching bar for the tailgate unfortunately, but I did find a nice stainless steel tailgate cover that you could look into to prevent your tailgate from getting scratched / damaged: Access Tailgate Protector # A27020309. view full answer...
If your toolbox is covering up the front stake pocket hole on the bed rails of your 2009 Chevy Silverado with a 5-1/2 foot bed the part # 50-2030-C is not going to be compatible.
If the toolbox sits between the bedrails instead these would fit just fine. view full answer...
Go To Results