Filter Questions and Answers:

reset filter

Expert Answers about Hitch Bike Racks


  • Replacement Rear Wheel Assembly for Yakima HoldUp Bike Rack
  • I'm sorry to hear that you were hit by a car (hopefully you're ok!) and we do have exactly what you need, though the arm by itself is not something that is available from Yakima as a replacement part. For your Yakima HoldUp 2-Bike Rack # Y02443 you will need the Replacement Rear Wheel Assembly for Yakima HoldUp Bike Carriers # 8890281. Just in the interest of thoroughness (because front and rear can be confusing on bike racks) I did add a photo showing the difference between the Rear...
    view full answer...

  • Replacement Straps for Inno Aero Light 4 Bike Rack
  • The correct replacement strap for the Inno Aero Light 4 Bike Rack part # INH640 is the Replacement Ratcheting Wheel Strap part # INISP330ST. The Replacement ZipStrip Straps for Yakima Standard Bike Rack Cradles part # Y8890297 won't work.
    view full answer...

  • Replacement SpeedKnob for the Yakima Dr.Tray Bike Rack
  • The correct replacement SpeedKnob for the Yakima Dr.Tray 2 Bike Platform Rack part # Y02473 is actually the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks part # 8880717 which is slightly longer than the Replacement SpeedKnob and Wedge Assembly for Yakima Bike Racks part # 8880508.
    view full answer...

  • Replacement Threaded Hitch Bolt for a Thule DoubleTrack Bike Rack
  • The threaded hitch bolt you will need for your Thule DoubleTrack # TH990XT is # 853-5917. The nuts inside the shank though are not available. Nor is the shank itself. But you could either use the new bolt or a tap and die set to cut new threads in the nuts.
    view full answer...

  • How To Replace the Locking Cable On a Yakima HoldUp Bike Rack After Face Has Been Damaged
  • In order to replace the bike lock cable on the Yakima HoldUp Bike Rack like part # Y02443 you will need to use the Replacement Cable Lock Assembly part # Y8890284. There would be no way to unlock the core you have now if the face was damaged but this is not required to replace the cable anyhow so long as it is not inserted into the pin. Please note, the above cable lock does not come with a lock core or change key which you will need therefore you will either want to let me know your key...
    view full answer...

  • Are Replacement Parts Available for the Thule Hitching Post Pro # TH934XTR
  • Definitely! The Thule Hitching Post Pro # TH934XTR uses a lot of the basic Thule equipment including the following: Stay-Put Cradle - # 853-7887 Anti-Sway Attachment - # 852-2903-001 2" Hitch Adapter - # 853-7489 Round Tube End Cap - # 853-2181 Rubber Bumper - # TH7533860 Strap for Cradles - # 852-3006-001 Hardware Bag - # 7520990001 If you end up needing something more specific just let us know!
    view full answer...

  • Recumbent Bike Rack Recommendation for 2018 Kia Sorento
  • We have great recumbent bike rack options like the Hollywood Racks Sport Rider for Recumbents part # HR1000Z-R which once you install a hitch on your 2018 Kia Sorento you'd be totally set. The recumbent bike racks have the ability to handle the extra weight and longer wheelbase of the recumbents as well as the smaller wheel diameters. Then for a trailer hitch the Draw Tite part # 75908 would be an excellent option that installs relatively easy and has plenty of weight capacity. I attached...
    view full answer...

  • Replacement Anti-Rattle Hitch Pin for Thule TH912XTR Roadway 2 Bike Rack
  • You're correct, the # 853-5917 is indeed the correct replacement for your broken anti-rattle hitch pin. The pin is fully compaitble with your Thule # TH912XTR bike rack. When installing the hitch pin, it only needs to be about a 1/2 turn past finger tight to hold the rack in place.
    view full answer...

  • Replacement Straps for Curt Premium 5 Bike Rack # C18065
  • You can indeed obtain some spare cradle straps for the Curt Premium 5 Bike Rack # C18065 with the part # C18007. This includes 2 straps and they are direct/exact replacements for this particular rack. I have included a couple video reviews that you can check out as well.
    view full answer...

  • Replacement Wheel Trays for the Thule T2 Classic
  • The correct replacement wheel tray for the Thule T2 Classic 2 Bike Platform Rack part # TH9045 or part # TH9044 is the Replacement Tire Wheel Tray part # 8523598001 for front or part # 7521568001 for rear. The Replacement Tire Wheel Holder part # 8528023001 is for the Thule T2 Pro not the Thule T2 Classic.
    view full answer...

  • How To Replace Keys for Thule EasyFold XT With No Numbers On Lock Core
  • In regards to the Thule EasyFold XT 2 E-Bike Platform Rack part # TH903202, the lock codes are no longer printed on the face of the core as they once were. Therefore, you will need to get new lock cores if you don't have your key number. In order to do this, you will need to have the lock cores unlocked and so long as they are you can obtain the Thule One-Key System Lock Cylinders part # TH450400 and change them out with the included change key. If the cores are locked then you need to...
    view full answer...

  • Is End Cap Piece for Locks on Arms of Thule T2 Pro XT Replaceable
  • The end cap piece for the arms on the Thule T2 Pro XT # TH9034XT aren't available on their own so the only way to replace them is with the entire tray, part # 7524703001 for the tray nearest the vehicle or part # 7524703002 for the tray furthest from the vehicle. This bike rack does have a limited lifetime warranty so this may be something that is covered under that and it'd be worth looking into.
    view full answer...

  • Recommended Replacement Anti-Rattle Hitch Bolt for Thule Roadway 2
  • Thule products have a proprietary thread that is used on all of their hitch mounted bike rack shanks, so you would need to use the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 to secure your Thule Roadway 2 # TH912XTR to your vehicle. This kit comes with the bolt you're looking for as well as a lock compatible with the Thule Same Key System, so it can be keyed the same as any other Thule lock if you already have Thule products.
    view full answer...

  • Replacement Yakima Two Timer 2 Inch Adapter
  • The correct replacement shank adapter for the Yakima TwoTimer 2 Bike Platform Rack park # Y02468 is the Replacement Yakima Two Timer 2 Inch Adapter part # 8880519. I spoke to my contact at Yakima and they said that the Replacement 2" Hitch Adapter for Yakima Flipside, DoubleDown and StickUp Bike Carriers part # Y8890174 will not work unfortunately but we do have the correct one for you.
    view full answer...

  • Replacement Wheel Straps for Swagman Escapee 2 Bike Rack S64693
  • Yes, my contact at Swagman confirmed that you can use the Replacement Ratcheting Wheel Strap # SP494 for spares with your Escapee 2 rack # S64693. These are not green like the original straps but these will work fine since they are the same strap just in another color.
    view full answer...

  • Depth Measurement of Swagman Traveler XCS Bike Rack
  • I spoke with Swagman and the distance from the back of the Swagman # S64664 you referenced to the furthest point out is 20 inches.
    view full answer...

  • Which Hitch Pin Should be Used with Swagman XTC2 When Installed in 2 inch Hitch
  • Which bike rack do you have specifically? Some bike racks have very specific hitch pins that need to be used with them so I'd need to first know what you have to pick out your best solution.
    view full answer...

  • Replacement Straps And Cradles For The Thule Apex XT 2 Bike Rack
  • The only cradles and straps available for the Thule Apex XT 2 Bike Rack for 1-1/4" and 2" Hitches - Tilting Item # TH9024XT are going to be the direct Replacements. There is not an upgraded version of either one available at this time. I recommend the Replacement Cradle with Anti-Sway Attachment for Thule Bike Racks - Qty 1 Item # 7524774001 and Replacement HideAway Cradle Ratchet Straps for Thule Bike Racks - Qty 6 Item # TH536.
    view full answer...

  • Replacement Hitch Pin and Tether for a Yakima RidgeBack 2 Bike Rack Part # Y02457
  • The wire that attaches the hitch pin to your Yakima RidgeBack 2 Bike Rack part # Y02457 is called a tether and only has one purpose which is to make sure the hitch pin does not get lost or stolen. It has no bearing on the security of the hitch pin inside the receiver so you should have no worries with your hitch pin falling out. The small ball at the end of the hitch pin is however a tad bit more important which I recommend checking. We do not sell the tether separately but you can buy...
    view full answer...

  • Replacement Hitch Bolt for Swagman Trailhead 3 Bike Rack
  • In regards to the Swagman Trailhead 3 Bike Rack part # S63365, if you can't get the bolt to thread then first clean the threads but if they are damaged then you will need replacements. For the hitch bolt you can use part # P5902 or part # S64029 for locking. That said, the receiver insert could be damaged as well so I recommend replacing this while you are at it, part # P313.
    view full answer...

  • Replacement Speed Knob and Hitch Pin for Yakima RidgeBack 2 Bike Rack
  • The model number you provided (8002457) indicates you have the Yakima RidgeBack 2 Bike Rack part # Y02457. If that is the case then you need the Replacement SpeedKnob and Wedge Assembly part # 8880508 and the Replacement Hitch Pin part # 889-0231.
    view full answer...

  • Replacement Rear Wheel Strap for a Thule T1 1-Bike Platform Rack Part TH9041
  • The correct replacement rear wheel strap for the Thule T1 1-Bike Platform Rack part # TH9041 is the Replacement Tire Wheel Strap part # 8527642001. I was able to confirm this with Thule for you. The rear wheel strap fits both the T1 and T2 which are both fat tire compatible hence the description. We also offer the Replacement Rear Wheel Holder and Strap part # 7521568001.
    view full answer...

  • Is Replacement Tray for Yakima HoldUp EVO Compatible with Original HoldUp Bike Rack
  • The Yakima HoldUp # Y02443 and the HoldUp EVO # Y02479 are similar, but the designs are different enough that replacement parts aren't interchangeable. There have been 3 different models of the HoldUp so if you can let me know which one you have I can see if we have the replacement parts. The original HoldUp (2008-2009) was silver and had basic functions. The next HoldUp (2009-2012) was also silver but Yakima added some upgrades with a spring loaded pull pin, pivoting arms that stopped...
    view full answer...

  • Replacement Wheel Strap for Swagman Chinook Platform Bike Carrier
  • We do carry the wheel strap you need for the Chinook, part # S64683. It's part # SP494 which is the exact replacement.
    view full answer...

  • How To Use the Yakima HoldUp for 1-1/4 Inch Hitch with 2 Inch Trailer Hitch Receiver
  • The Yakima HoldUp 2 Bike Rack is offered for both 1-1/4" trailer hitch receivers with part # Y02445 and 2" trailer hitch receivers with part # Y02443. In order to use the 1-1/4" version with a 2" trailer hitch receiver you will need the Replacement Tongue for Yakima HoldUp Bike Racks part # 8880580 and the Replacement Hitch Bolt and Clip for Yakima HoldUp part # Y8890200.
    view full answer...

  • Can Swagman XC Bike Rack Fit 2019 Subaru Outback with Recessed Trailer Hitch
  • The Swagman XC part # S64650 that you referenced has a distance of 10-1/2 inches from the center of the hitch pin hole to the nearest bike hoop which means it will fit and clear you bumper. The pedal will also fit without hitting the vehicle but you may need to position the crank/pedal in a way that allows it fit around the bumper. I looked at pictures of your vehicle and the rear of it tapers forward too so this should be pretty easy.
    view full answer...

  • Replacement Anti-Sway Strap for Thule Apex Bike Rack
  • If you can't get it out without damaging it you might have to cut the end off so that you can slide it all the way through and then replace the damaged one with part # 1500056004.
    view full answer...

  • Replacement Locks for Swagman E-Spec 2 Electric Bike Rack
  • There are not replacement keys we carry for the Swagman bike racks. For your Swagman E-Spec 2-Electric Bike Platform Rack - 2" Hitches # S64689, the only way to get your locks back are to call a locksmith or use the Replacement Long and Short Hooks for Swagman G10 or Chinook Platform Bike Racks - Locking # SP428 which will fit your rack. This will still give you separate locks from your hitch pin lock, but will give you the ability to once again secure your bikes to deter theft.
    view full answer...

  • Replacement Hitch Pin Bolt for Sportrack Deluxe Bike Rack SR2703
  • The replacement hitch pin bolt you need for your Sportrack Deluxe bike rack part # SR2703 is the part # 05002400000.
    view full answer...

  • Replacement Foam for the Hooks of a Thule DoubleTrack Bike Rack TH990XT
  • I spoke to my contact at Thule and we came up with a solution that would work as replacement foam for the hooks of your Thule DoubleTrack Bike Rack # TH990XT. You would want to head down to your local plumbing supply store and get some hot water pipe insulation to use as the replacement foam.
    view full answer...

  • Replacement Support Strap and Rubber Cradle Straps for Curt 4 Bike Rack
  • We carry both of those parts for your Curt 4 Bike Rack # C18030. The support strap is part # 18050 and the rubber hold down straps are part # C18007. The support strap comes in a quantity of 1 while the rubber straps come in a quantity of 2.
    view full answer...

  • Replacement Locking Cable for Yakima FullTilt Bike Rack
  • Yep, we sure do have the replacement locking cable you are looking for. What you need is the Replacement Locking Cable Assembly for Yakima Fulltilt and Fullswing Bike Racks # Y54FR. This is the correct replacement locking cable for the following Yakima bike racks: - Yakima FullTilt 5-Bike Rack # Y02463 - Yakima FullSwing 4-Bike Rack # Y02465 - Yakima FullTilt 4-Bike Rack Y02462
    view full answer...

  • Replacement Key A138 for Yakima Lock
  • We have the exact replacement Yakima key A138 that you need: - Replacement Key for Yakima Racks and Carriers - A138 # Y8772-A138 This is a quantity of one so it may be a good idea to order a couple just to have a spare handy.
    view full answer...

  • Can Smaller Frame Bikes Fit on Yakima Ridgeback Bike Rack
  • The arms of the Yakima Ridgeback part # Y02458 that you referenced they measure 13-1/2 inches apart measured from outside to outside. This rack typically works well with smaller bike frames but in some cases the easiest solution is to use a bike frame adapter bar like part # UB01 which attaches to the steering stem and seat post to provide a wider, level attachment point. Check out the review video I attached as well.
    view full answer...

  • Replacement Locking Hitch Pin for Rola Convoy
  • I have a solution for you, but the 1/2 thread you're referring to won't be quite the same as a 12mm thread. You can use the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 as a replacement locking hitch pin for your Rola Convoy # 59307 since it has a 12 UNC thread on the pin, which is the same as 12mm.
    view full answer...

  • Replacement Shank for Swagman E-Spec 2-Electric Bike Platform Rack
  • The correct replacement shank for your Swagman E-Spec 2-Electric Bike Platform Rack part # S64689 is the Replacement Shank for Swagman E-Spec 2-Electric Bike Platform Rack part # SP474.
    view full answer...

  • Replacement Thule Wheel Trays for Fat Bike Compatibility
  • For your Thule platform bike rack, the wheel holders/trays you need will depend on your bike rack. It sounds based on your description that you have the original T2 or the T2 Classic which are stock compatible with tires up to 3 inches wide. If you have the T2 Classic like # TH9044, you will use the Fat Tire Adapter Kit for Thule T2 Platform-Style Bike Rack # TH919. If you have a different Thule bike rack, let me know the model and I'd be happy to assist.
    view full answer...

  • Is There a Replacement Key for Rola TX-104 Bike Rack?
  • For your Rola TX-104 4-Bike Rack for 2" Hitches - Tilting # 59401 does not have a specific lock core it uses. If you know the key number you had, then I've linked all our replacement options to help. If you do not know the key number, I can't help because the core doesn't' have a corresponding number on it. An option to keep using your bike rack is to simply use a cable lock like # e98891 and looping the cable through your safety chain loops on the hitch.
    view full answer...

  • Replacement Snapper Pin and Frame Cradles for Swagman Trailhead Bike Rack
  • For your Swagman Trailhead # S63360 we have the replacement snapper pin part # P322 which is the pin that holds the upright mast vertical. For replacement frame cradles you'd then want the part # SP499 which comes with all new cradles and straps.
    view full answer...

  • Replacement Washers and Screws for a Thule T2 Pro XT Bike Rack
  • The correct replacement part is part # 951081654. This will replace the washers on your Thule T2 Pro XT, part # TH9034XT rail connections with the button head screws, part # 853597604.
    view full answer...

  • Replacement Frame Hook for Swagman Dispatch 2 Bike Platform Rack
  • The only option we have for you to replace the long frame hook on your Swagman Dispatch 2 Bike Platform Rack part # S44FR is to use the Replacement Long and Short Hooks part # SP428. This option does however come with locks so it will be like adding a new feature to your bike rack. Unfortunately, we don't offer the standard long hook separately from the above kit.
    view full answer...

  • Replacement Parts for Thule EasyFold Hitch Rack TH903202
  • Thank you for your purchase of the outstanding Thule EasyFold Electric Bike hitch-mount rack # TH903202. For a replacement ramp use part # 933401. I also included a link to all Thule bike rack replacement parts for you.
    view full answer...

  • Available Replacement Parts for Yakima RidgBack # Y02457 Bike Rack
  • If you look at the provided diagram, you can see the replacement parts that Yakima offers for your # Y02457 Ridgeback Bike Rack. If what you're needing isn't shown, please let me know what you're needing. Zip strips # Y8890297 Endcap # 8890306 2" adapter # 8890298 Replacement hitch pin # 889-0231 Replacement Speed Knob and Wedge Assemby # 8880508 Replacement Wrench # 8890285 Replacement Cradle w/ Zip Strip # 8880597 Replacement Cradle w/ Anti-Sway and ZipStrips# 8880598
    view full answer...

  • Replacement Lower Cover for Yakima RidgeBack Bike Rack
  • We do have the replacement lower cover for the Yakima RidgeBack # Y02457! This is found as part # 8880558 on our site.
    view full answer...

  • What is the Diameter of the Vertical Square Tube on Swagman XTC 2-Bike Rack # S64670
  • The replacement part you referenced, Swagman Replacement Ratcheting Hook Set for Swagman XTC and XC Series Bike Carriers, part # P186, works on their XC and XTC bike racks as a replacement hook to secure the bikes on the carrier. This fits over the 1-1/8-inch x 1-1/8-inch vertical post used on these two racks. The vertical post has "teeth" or threads cut into two of the opposing corners; this is what the ratcheting hook holds onto. Like many bike racks parts these are application-specific...
    view full answer...

  • Platform Bike Rack Recommendation for Carrying E-Bikes
  • Since you have a Class I hitch on your vehicle I have a great bike rack solution for your heavier e-bikes but the Sherpa does not have the capacity you'll need so it would not be the way to go. Instead I'd recommend the Thule EasyFold XT part # TH903202 as it was designed for E-bikes so it can handle the weight and is also very easy to load/unload due to it's included ramp setup and has a frame clamp design that works great with the typically alternative style frames of e-bikes.
    view full answer...

  • Replacement Key Needed For Cable Lock on Rola TX-102 2-Bike Rack
  • If you check out the face of your lock core you can purchase a replacement key for the cable lock on your Rola TX-102 2-Bike Rack # 59400. Once you know your lock number then we have options for you to order replacement keys from us. If your lock core number starts with an R then you need the older style key which can be found as part # 38373-001 for an R001 key. If you don't have the R then you need the newer style key which you can find as part # 59317001 if you have an 01 key. Basically...
    view full answer...

  • Adapter Recommendation for Curt Hanging Bike Rack for Carrying Women and Kids Bikes
  • For womens bikes and kids bikes you really need to use a frame adapter bar like part # UB01 when carrying them on a hanging bike rack. This allows the bikes to hang as level as possible since the bikes will have smaller frames with non-horizontal top tubes. What the adapter does is attach to the seat post and the steering stem to provide a wider and more level bar for the rack to grab. I attached a review video for this adapter for you to check out as well. This adapter would work...
    view full answer...

  • Best Bike Rack Recommendation for E-Bike Rad Rover
  • For E-bikes like your Rad Rover there really is only one good option bike rack style. You'll need to go with a hitch mounted bike rack like the Thule EasyFold 2 Bike Rack # TH903202. This rack has the higher weight capacity needed for E-bikes as it has a capacity of 65 lbs per bike and can fit fat tires up to 4-11/16 inch in width. This rack has a ramp that comes with it for easier bike loading and has clamps that allow it to accomodate basically any frame style out there.
    view full answer...

  • Will Bike Rack Blocking View of License Plate Cause Issue with Thule DoubleTrack
  • What's interesting is that most states have similar laws about the license plate not being obstructed which is what a bike rack will at least partially do, but we've yet to hear about a situation where a police officer gave someone a hard time for their bike rack. The Thule Doubletrack # TH990XT that you referenced would block the view of the plate to a certain extent but most likely would not get you in trouble.
    view full answer...

  • Replacement Shank Recommendation for Swagman Traveler XCS
  • Sounds like you are looking for the part # SP325 which is the replacement reciever shank for the Swagman XCS bike rack part # S64664.
    view full answer...

  • Replacement Cradles for the Swagman Chinook S64683 Platform Bike Rack
  • The replacement cradles for the Swagman Chinook # S64683 that you are looking for is part # SQ1010 if you are replacing the outer left/inner right or part # SQ1011 if you are replacing the inner left/outer right. My contact at Swagman confirmed this and also said to note that these parts come in black, not the silver ones that came on the Chinook.
    view full answer...

  • Replacement Bail Pin for Reese Eclipse Bike Rack 63123
  • In order to replace the bail pin and clip on the 3 Bike Hitch Mount Folding Rack part # 63123 you can use the Replacement Wire Lock Pin part # 2471.
    view full answer...

  • Replacement Bolts and Knobs for SportRack Pathway Deluxe Trailer Hitch Receiver Mounted Bike Rack
  • We do carry all of the replacement parts for the SportRack Pathway Deluxe, part # SR2703 . I've listed them all below for you so you can pick and choose exactly what you need. Replacement Locking Knob without a bolt, part # 05003400000 Replacement Locking Knob with a bolt, part # SR0018 Replacement Non-Locking Knob, part # SR05003300000 Hardware Kit for Thule Parkway Bike Carriers, part # 753-3550 It's a good thing to know that SportRack and Thule use the same parts and often...
    view full answer...

  • Replacement Rubber Straps For Swagman Bike Carrier
  • We have several replacement straps that are designed to fit Swagman Bike Carriers. It sounds like you have a hanging bike carrier like a Trailhead bike carrier, part # S63360. The replacement strap for a trailhead bike carrier is part # P482. This strap measures 9-1/2 inches long x 1 inch wide x 1/4 inch thick. These straps are ordered individually, so if more than 1 is needed, you can change the quantity when ordering.
    view full answer...

  • Availability of Replacement Vinyl Cradle Pad for Swagman Original Series Bike Carrier # S64152-2
  • Replacement vinyl cradle pads are available for the Swagman Original bike rack for units made in 1999 and after. These are offered as single pieces, part # P0023. These grey pads insert into either the top or bottom plate of the cradle and snap into place. In order to replace all pads in the original bike rack you will need to order 6 pieces.
    view full answer...

  • Replacement Upright Bar Recommendation for a Swagman XC2 Bike Rack
  • For the replacement upright post for your Swagman XC Bike Rack part # S64650 you would want the part # P321.
    view full answer...

  • Replacement 2 Inch Adapter for Swagman XTC-2 Bike Rack With Stripped Bolt
  • There are a number of bolts on the Swagman XTC-2 Bike Rack # S64670 so though I'm not 100 percent sure if I know the exact part you are talking about, but from your description it sounds like you mean the bolt in the rack's 2" adapter. If that is stripped, what you will need is to replace the entire adapter with the Replacement 2" Adapter # SP323. I have added a link to a video review of this part for you to check out.
    view full answer...

  • 1-1/4 Inch to 2 Inch Adapter Sleeve for Hollywood Racks Traveler Bike Rack HR8500
  • Yes, you can get the 1-1/4 inch to 2 inch adapter for bike rack # HR8500. You will need Replacement Hitch Adapter Sleeve # HRREDADA. It also includes the screw to hold it to the bike rack shank.
    view full answer...

  • Need a Replacement Anti Rattle Tongue Insert for a Older Yakima Bike Rack
  • I have a solution for your bike rack. Unfortunately, it looks like the replacement part is no longer available. However, using the Brophy 2 inch to 1-1/4 inch Receiver Sleeve, # HT02, will be the best option to allow you to mount your bike rack to any 2 inch receiver hitch. The threaded pin will still be able to tighten the rack's hitch shank to the hitch to help prevent the rack from rattling in the hitch. I also recommend the Trailer hitch Receiver Lock, # e98880, to secure the...
    view full answer...

  • Thule T2 Pro Bike Carrier Wheel Strap Replacement
  • Replacement Fat Tire Wheel Strap for Thule T2 Classic Platform Bike Racks - Qty 1 # 8527642001 will not work with the Thule T2 Pro XTB 2 Bike Platform Rack - 2" Hitches - Tilting - Black # TH9034XT. I confirmed with my contact at Thule that the strap for the T2 Pro is integrated into the wheel holder assembly and is not available as a separate part. This part is the Replacement Rear Wheel Holder Assembly for Thule T2 Pro Platform Bike Racks - Qty 1 # 7521682001 and is compatible with...
    view full answer...

  • Replacement Anti Rattle Hitch Pin for Curt Bike Racks
  • The anti rattle pin for Curt bike rack # C18087 isn't available as a replacement part. However, it is the same pin as # C22321 for a 2 inch hitch receiver and # F-315 for a 1-1/4 inch.
    view full answer...

  • Replacement Top Plate for Swagman XP Folding 5 Bike Rack
  • It sounds like you are referring to the top plate for the Swagman XP Folding 5 Bike Rack # S64970, which is indeed available with part # P161. This includes 1 cradle top plate with the vinyl insert. If you are referring to something else please let me know and I will be happy to see if we have it available.
    view full answer...

  • Replacement Wheel Tray for Swagman Chinook Bike Rack
  • I reached out to my contact at Swagman and we were able to add the part you needed to our website. You will want # SP520 replacement wheel tray for left rear/right front to get that left rear wheel tray on your Swagman Chinook Bike Rack # S64683. The # SP521 is the replacement for the right rear/left front if there was any damage there. These replacement wheel trays are the exact replacements you need in the same gray color.
    view full answer...

  • Replacement Parts for Yakima RidgeBack 2 Bike Rack
  • Your Yakima RidgeBack 2 Bike Rack # Y02457 uses a SpeedKnob that tightens the rack inside your trailer hitch receiver. Before removing the hitch pin and the bike rack, you will need to turn and loosen this knob so the shank can slide out of the receiver. To help with removing the red 2 inch adapter from the shank, you can try manipulating the SpeedKnob on the front of the rack while you try to remove the silver and red pieces. You should be able to free up these pieces so they can easily...
    view full answer...

  • Replacement Long Ratcheting Hook Set for Swagman XC 2-Bike Rack for Ball Mount
  • The replacement Swagman long is available as a single item for the Swagman XC 2-Bike Rack # S64664. For that, what you will need is the Replacement Long, Ratcheting Grip Arm for Swagman Traveler and XC 2 Bike Carriers # P188.
    view full answer...

  • Replacement Part for Damaged Anti-Rattle Wedge on Yakima FullSwing Bike Rack
  • It sounds like maybe your anti-rattle wedge was stripped or damaged on your rack, especially if your able to remove it from the rack completely. The correct replacement part for this is the # 8880508. This is a replacement SpeedKnob and wedge for the Yakima FullSwing, SwingDaddy, RidgeBack, or FullTilt bike racks. It comes with a control key so that you can remove the lock core from your previous rack and insert it in here. I have linked this replacement product to this page for...
    view full answer...

  • Replacement Anti-Rattle Hitch Bolts for the Pro Series Q-Slot Platform-Style Bike Rack # PS63138
  • I have some options that will work for you, however, Pro Series does not offer replacements anti-rattle bolts for their bike racks. Instead, you can use part # SR19696 for the 1-1/4 inch shank. Unfortunately the manufacturer no longer makes the 22967 which worked for the 2 inch receiver. These hitch bolts will look different from the original hitch bolts, but they will work with the Q-Slot Platform-Style bike rack. I had the Q-Slot bike rack and the Softride replacement hitch bolts,...
    view full answer...

  • Replacement Knobs for a Swagman Original Bike Rack
  • You'll need one of the following knobs based on when your Swagman Original Bike Rack, part # S64152-2 was made: Prior to 2009, part # P1004, this includes a standard 2 inch bolt that will fit the knob. 2009 to Present, part # P1041, which is compatible with M10 x 1.50 (3/8-16 UNC or 3/8-24 UNF Bolts) A locking front knob is available that is compatible with 2009 to Present versions of the rack as part # P1040
    view full answer...

  • Replacement Hitch Bolt Recommendation for a Swagman XC2 Bike Rack
  • The correct replacement hitch pin bolt you would need for your Swagman XC part # S64650 is the part # P5902. I went out into our warehouse and measured the threads of the Replacement Threaded Hitch Pin and Clip # P5902 and found them to be 1/2 inch diameter coarse thread.
    view full answer...

  • Replacement 2-Inch Shank for Swagman XP 5-Bike Hitch Bike Carrier S64970
  • Thank you for describing the replacement part you need for your Swagman XP Folding 5-Bike Hitch Rack # S64970. What you are looking for is a 2-inch shank. I called Swagman to confirm the correct part. What you need is part # SP129T.
    view full answer...

  • Which Allows More Clearance for Opening Tailgate Thule T2 or RockyMounts SplitRail
  • The RockyMounts Split Rail part # RKY11404 has a larger distance between the hitch pin of the rack and the nearest wheel rail at 10-1/4 inches when compared to the Thule T2 part # TH9034XT which has this distance at 7 inches. If that dimension is the most important factor for you the RockyMounts will be the better rack. The SplitRail is also a bit lighter at 44 lbs compared to the Thule which is 52. I did attach review videos for both rack for you to check out for further comparison.
    view full answer...

  • Replacement Bolt for Thule Hitching Post Pro Bike Rack # TH934XTR
  • I spoke with our contact at Thule and she confirmed that part # 908-1240-54 is the correct replacement bolt for the Thule Hitching Post Pro Bike Rack, part # TH934XTR. If you also need a replacement washer and lock washer for the bolt, you can use parts # 956122159 and # 951-1224-54. If you would like to upgrade the anti-rattle pin to an anti-rattle lock, you can instead use the Thule Snug Tite Hitch Lock and Anti-Rattle Device, part # THSTL2. I have provided a video demonstrating...
    view full answer...

  • Trailer Hitch Recommendation for 2015 Toyota Camry for Bike Rack
  • The trailer hitch I would recommend for your 2015 Toyota Camry to carry the Hollywood Racks # HR1000Z would be the Draw Tite part # 36540 which is a confirmed fit and would work well. I prefer this hitch over the Curt hitch for your vehicle as it does not require the use of a stabilizer strap like the Curt does with a non-supported load like a bike rack. I attached an install video for the hitch plus a review video for the bike rack on a similar 2015 Toyota Camry.
    view full answer...

  • Replacement Red Reflector for Reese Hitch Bike Carrier 63123
  • We do not carry an exact replacement red reflector for the Reese hitch bike rack # 63123 but we do have a handy self-adhesive reflector that measures 2-3/16-inches in diameter, part # RE37RB. We also offer a larger 3-3/16-inch reflector, part # RE21RB, which is also self-stick. Since there is no visible retaining screw for the reflector on the rack, chances are it too is a self-stick type.
    view full answer...

  • Replacement Wheel Loop Compatible with Reese Q-Slot Platform Rack
  • For your Reese Q-Slot Platform bike rack # PS63138, the replacement wheel hoop is not an option from Reese. I reached out to my tech contact and they don't offer it as a replacement part. I was able to get the dimensions of the bar and the Replacement Wheel Holder for Hollywood Racks Sport Rider Bike Racks - Right Side # HRSPRWHR will be compatible. Since it doesn't have the reflector, I recommend placing it closer to the vehicle versus facing the outside.
    view full answer...

  • Replacement Strap for Thule 943 Hitching Post Pro Bike Rack
  • The replacement strap for the T-3 cradle on your Hitching Post Pro is part # 753-3535. I've confirmed this with Thule. (You were pretty close with the number!)
    view full answer...

  • How to Determine the Correct Shank Adapter for a Yakima Ridgeback
  • To correctly identify the correct shank adapter for your Yakima Ridgeback, part # Y02457, you'll need to measure the holes at the end of the shank that the adapter will go over. The adapter holes for the older racks made before November 2005 are sized for M8 bolts. They should measure about 8 to 9 millimeters in diameter, and you'll use part # 8880612 for your rack. If it measures smaller, about 6 to 7 millimeters, then you've got a rack made after November 2005 and you'll want...
    view full answer...

  • Recommended Replacement Strap For Curt Premium Bike Carrier
  • Curt does not offer the straps for the bike rack but I do have a solution for you. I recommend the Replacement Strap, part # 853-2569. This strap measures 9-3/8 inches long and the holes measure 1 inch center to center. The only difference I could see was that the Curt strap has 9 holes in it and the # 853-2569 strap has 8, but it will work great on your bike rack.
    view full answer...

  • Need Replacement Hitch Pin and Clip for Swagman Original 3-Bike Hitch-Mount Bike Carrier # S64152-2
  • We can provide you with several options for a replacement hitch pin to secure your Swagman Original # S64152-2 to your 2-inch hitch receiver. The most cost-effective option is a simple pin and clip set, part # PC3. This fits a Class III or Class IV hitch that has a 2-inch receiver opening with a 5/8-inch hitch pin hole. This pin and clip do not lock the carrier to your hitch. If you wish to add some anti-theft and anti-rattle capability to your bike carrier you could instead use the...
    view full answer...

  • Hitch and E-Bike Rack Recommendation for a 2009 Honda Odyssey
  • E-bikes are a bit heavier than standard bikes, and since the E-Bike racks we carry are only designed for 2 inch hitches you would want to go with a 2 inch hitch like the Draw Tite Class III part # 75270 which is a confirmed fit for your 2009 Honda Odyssey. I attached an install video for this hitch for you to check out as well. For a bike rack the most popular option we have is the Hollywood Racks SE part # HLY84FR which is designed for the higher weights of E-bikes like what you have....
    view full answer...

  • Replacement Ratcheting Arm for Swagman Traveler Bike Rack
  • Thanks for the photo. It looks like you have the Swagman Platform-Style 2 Bike Rack part # S64663 which means the Replacement Short, Ratcheting Grip Arm part # P187 is correct for you.
    view full answer...

  • Replacement Wheel Holder for Hollywood Racks Sport Rider BIke Rack for Trike or Recumbent Bike
  • Yes you can because we have exactly what you need, the Replacement Wheel Holder - Right Side # HRSPRWHR-W, which is the correct replacement for the Hollywood Racks Sport Rider Bike Rack for 1 Recumbent or 1 Trike # HR1000Z-R-TRKADP. Additionally, if you ever need the left side the correct part is the Replacement Wheel Holder - Left Side # HRSPRWHL-W.
    view full answer...

  • Replacement Top Plate, Knobs, and Bolts for a 2007 Swagman Original Bike Rack
  • Sorry to hear about the stroke of bad luck with the thief. We do have a replacement top plate, bolts, and knobs for the Swagman Original bike rack, # S64400. You will need replacement plate # P113. It comes with the plate itself, bolts, and knobs. Current pricing is available on the product page. Nuts are not available. All you would need to do is remove all of the old parts from the damaged top plate and put the new plate and parts in their place.
    view full answer...

  • Correct Replacement Hitch Bolt for Thule T2 Classic 2 Bike Platform Rack
  • The correct replacement hitch bolt for the Thule T2 Classic 2 Bike Platform Rack part # TH9045 is part # 853-5917 or part # THSTL2 for locking.
    view full answer...

  • Replacement Parts for Curt Platform Type Bike Rack
  • I'm sorry to say that Curt doesn't offer replacement parts for their # C18085-FB bike rack which is sold only as a fully complete rack. Your best bet would be to try to straighten the shank so that it's usable or replace the rack entirely with a name brand rack from a manufacturer that does stock spare parts like Thule, Yakima, or Swagman. The Swagman # S64678 Current would make a good replacement. The Current works in 1-1/4 or 2 inch receivers and can accommodate bike tires up to 5...
    view full answer...

  • Can I Purchase The 2 Inch Adapter Sleeve For Thule Hitching Post Pro # TH934XTR Separately
  • We have the sleeve adapter that you will need for your Thule Hitching Post Pro 4 Bike Carrier # TH934XTR. You will need the Thule Replacement 2 Inch Shank Adapter, part # 853-7489, which will allow you to mount the bike rack in a 2 inch receiver. If you are also missing the hitch pin, I would recommend a locking hitch pin like the Thule Snug Tite Hitch Lock, part # THSTL2. This lock is also an anti-rattle device that will reduce movement and noise when your bike rack is attached to...
    view full answer...

  • Replacement Lock for Threaded Hitch Pin on Saris SuperClamp EX
  • For a replacement locking hitch pin on your Saris SuperClamp EX # SA4025F you need part # SA3022. Just the yellow piece isn't replaceable so you'll get the threaded hitch pin with it as well. We don't have a way to match this lock core to your current lock core so if you'd like everything to be keyed alike you need part # SA984 instead which provides you with a slightly different style cable lock.
    view full answer...

  • Replacement Wheel Straps for the Yakima TwoTimer 2 Bike Platform Rack
  • In order to replace the wheel straps, you will want to use the Straps for Yakima TwoTimer part # Y02470 which are a fit for the Yakima TwoTimer 2 Bike Platform Rack part # Y02468.
    view full answer...

  • Availability of Replacement Top Plate and Cradle Pads for Swagman Original Bike Rack, Part # S64400
  • Swagman does indeed offer replacement top plates. If your rack is an older model, manufactured between 1999-2008, you would use part # P113. If your rack was manufactured after 2008, you would use the # P121 top plate. The replacement cradle pads are also available. They are sold individually as part # P0023.
    view full answer...

  • Availability of Replacement Bolt for Swagman XC2
  • I spoke with my contact at Swagman and he confirmed that the Swagman Replacement Threaded Hitch Pin and Clip # P5902 replaces a lost or damaged threaded hitch pin and clip for Swagman bike carrier # S64650. This part works on 1-1/4" shanks with the 2" adapter installed. I have included a video review of the Swagman XC 2-Bike Rack Platform Style bike rack for you to check out.
    view full answer...

  • Replacement Threaded Screw and Pin for Thule Hitching Post Pro # TH934XTR
  • If you are needing the Flat Cap Screw that holds the adapter on the shank of the Thule Hitching Post Pro # TH934XTR, then you are needing part # 853-5787-02. If what you are needing is the replacement threaded pin for the Hitching Post Pro then you will need part # 853-5917. You can use the Ratchet with 3/4 inch Socket # PT20104-38524 to tighten the anti-rattle bolt down. This is a convenient thing to just keep in your rear cargo area so you don't have to go hunt down a wrench or...
    view full answer...

  • Lost Keys for Lock on Yakima Doubledown #Y02424 and Need Replacements
  • Worst case scenario, I am going to assume that the hitch lock is the only Yakima lock that you have that used that key. If this is the case you will either need to have a locksmith pick the lock or you can try drilling it out. In this case you would then have to replace the lock with part # Y07235. If by chance you have another lock which used the same key and it is in the unlocked position, you could use Control Key, # Y8007835, to remove the lock core and obtain the number listed on...
    view full answer...

  • Replacement Parts Needed for Older Swing Away Bike Rack
  • From the pictures you sent in it looks like you have an older version of the SportRack Ridge Swing 4 Bike Rack # SR2415. I do have some replacement parts that could work, but unfortunately there aren't any specific replacement pieces. What I'm thinking will work is using the SportRack Cradles # 05002100000 and # 05002900000 with the strap # 05002200000 to secure your bikes to the bike rack. These fit 1-1/4" diameter tubing so you'll need to measure the diameter of the arms on your bike...
    view full answer...

  • Replacement Rim Protector for Hollywood Racks TRS SE Bike Rack
  • Yes, we do have that replacement part for you! The replacement rim protector for the ratchet straps on your Hollywood Racks TRS SE # HR3500 is part # HRTRS-RP-STP on our site.
    view full answer...

  • Similar Bike Rack to Swagman XC2 that Can be Used at Rear of Motorhome
  • RV approved bike racks to differentiate between the different styles of RVs. The Swagman XC # S64650 can be used at the back of a motorhome but not at the back of a travel trailer. For a similar bike rack that is rated for use at the rear of a travel trailer with the part # S64663 but the XC is not rated for use at the back of a travel trailer.
    view full answer...

  • Replacement Key for Yakima RidgeBack 2 Bike Rack
  • In order to obtain a replacement key for your RidgeBack 2, part # Y02457, you'll need the key number. Replacement keys are part # Y8772-AXXX, with the three x's representing the key number. If you don't have the key number, you'll need to have a locksmith pick it for you, then remove the lock cylinder. The key number is stamped into the side of the lock cylinder as shown in the provided photo.
    view full answer...

  • Replacement Key for the Swagman Titan 2 Bike Rack
  • I do have a way for you to lock your bikes to the Swagman Titan 2 Bike Rack part # S63400 but unless you either have the key number off of the missing key or the key number on locking core, then it would be hard to find a replacement. Instead you can use the Replacement Cable for Swagman Bike Rack and Hitch Locks part # S2005 to lock your bikes to the bike rack and the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks part # S64029 to lock the bike rack to the trailer hitch.
    view full answer...

  • Replacement Anti-Rattle Bolt and Lever for Hollywood Racks Road Runner 5 Bike Carrier
  • We have the correct replacement part for you, but the replacement anti-rattle bolt and lever you referenced is not the correct part for your Road Runner 5. For your Hollywood Racks Road Runner 5 Bike Carrier for 2 Inch Hitches # HR520, the correct Anti-Rattle Bolt and Lever is the replacement part # HRNWLB2X. I spoke with my contact at Hollywood Racks and he confirmed that for the 5 bike rack, you will want # HRNWLB2X. This replacement anti-wobble bolt and lever is designed for the...
    view full answer...

  • Replacement Towing Receiver For Swagman Traveler XCS Platfor-Style Bike Rack
  • Sounds like you need the Replacement Bent Towing Receiver, part # SP325 for your Swagman Traveler XCS, part # S64664. The # SP325 fits over 2 inch square ball mounts and includes the mounting hardware.
    view full answer...