For a replacement sewer hose extension with bayonet fitting you can use the 5-foot Camco RhinoFLEX RV Sewer Hose Extension # CAM39765 or if you need a longer hose their part # CAM39863 which is 10-feet in length. view full answer...
Thank you very much for your question. The Valterra RV Sewer Hose Carrier # A04-5094BK, has the mounting brackets and screws included in the product. We searched the description of this product and no additional mounting brackets are available.
The only replacement part we found for this item is the Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier # A04-0448BK view full answer...
The Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses, # F02-4350 uses bayonet fittings to secure the lug fitting from the hose onto RV's waste valve. These are not replaceable individually. You will need to purchase a new Flush King, # F02-4350. view full answer...
The only replacement gasket we have available for RV sewer hose connectors is with the Camco # CAM39834. This kit includes two bayonet and two elbow gaskets that are designed to fit on Camco elbow and bayonet fittings.
I have attached a short video demonstration on this product so you can get a closer look and see if they will work on your connector. view full answer...
It's highly unlikely that you're going to be able to adapt or repair the damaged hose on your RV sewer maceration system, so you'll want to replace it with # SS25 which is a 25 foot extension and should provide you with plenty of hose length to run from your RV black water tank to the dump station. Different length hoses can be found with part number # 278-SS02 (10ft) or # SS15 (15ft).
In most cases, modifications are not recommended on parts for this reason, so if you can tell me more... view full answer...
All of our sewer hoses are designed to connect to the larger 3" opening since this is the standard.
Normally what you'll see is something like the Dometic Double Waste Valve Setup # TR38A which has the gray tank connecting to the black tank opening, and they are just separated by the different-sized valves.
If you're talking about a 1-1/2" replacement waste valve then we do carry those as well, which you can filter through in the linked selection.
If you are looking for something a little... view full answer...
The #F02-3105 will not work with the Rhino system. You will need the RhinoFLEX RV Sewer Hose w Swivel Fittings, 4-in-1 Adapter, and Storage Caps - 15' Long # CAM39761 to get that adapter. That adapter is not available separately. view full answer...
The PF247010 replacement door you're referencing has been discontinued. In order to replace the door on your Phoenix Faucets Super Slider Sewer Hose Storage Tube you will need the Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier - Black - Qty 1 # A04-0448BK which replaced the D&W Inc PF247010. There is also a white version available # A04-0448.
I have attached some review videos for your reference. view full answer...
I took a look at the Waste Master RV Sewer Hose w/ Camlock Fittings, Nozzle, and Endcap # LC360781, which is no longer unavailable from the manufacturer, and I was able to find what I believe to be what you're after:
-Double RV Waste Valves # TR38A.
This wye features a 3" spigot that will slide over your black water line, as well as a 1-1/2" hub that will slide over your gray-water connection.
To complete installation, you'll also need to use some Valterra ABS Solvent Cement # A05-0303... view full answer...
Yes, we carry the Replacement Cap and Strap for Valterra EZ Hose Carrier # VA82VR as it is very common for the cap of the Valterra RV Sewer Hose Carrier # A04-5094BK to be lost or damaged over time. view full answer...
The following replacement parts are offered for the SewerSolution Macerator System part # SS01:
Replacement Quick Connect Hose Assembly part # SS05
Replacement Jet Nozzle part # 278-SS04
Extension Hose part # 278-SS02
Maintenance Kit part # SS07
Replacement 4-in-1 Elbow Adapter part # SS06 view full answer...
Unfortunately the spring lock ring is not available separately or as a replacement part for the Easy Slip Coupler Fitting # CAM39163. It comes with the unit as well as other units like # CAM39144 and # CAM39173. view full answer...
We have the Replacement Cap and Strap for Valterra EZ Hose Carrier - White # VA72VR which is manufacturer part number A04-0338 you referenced.
We also have the Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier - White - Qty 1 # A04-0448 for the adjustable carrier or the Replacement Cap and Strap for Valterra EZ Hose Carrier - White # A04-0161. view full answer...
I took a look at the Valtera line of products and the 3 inch replacement valve we carry # CAM39513 can be used as a replacement. If you want to replace the whole assembly and have an input for a regular garden hose for rinsing you can use # CAM39062. view full answer...
Valterra makes two different replacement caps for their sewer hose carriers. The # A04-0161BK is for carriers manufactured before November of 2019. If your carrier was manufactured after that time (which is likely given the 2021 model year of your Airstream), the correct replacement cap would be part # VA82VR.
I've put together a side by side photo for you, showing the differences between the two. view full answer...
The Jet Nozzle # 278-SS04 is a replacement for the SewerSolution Macerator System # SS01. So if you have this system and need to replace the Jet Nozzle then this is the part for you. If you are looking to add the system then # SS01 is what you would need.
In addition to the Jet Nozzle other replacement parts for this system are:
Quick Connect Hose Assembly # SS05
10 Foot Extension Hose # 278-SS02
Replacement 4-in-1 Elbow Adapter # SS06
Maintenance Kit for 2017 and newer systems # SS07 view full answer...
The item you need is the Replacement Cap and Strap for Valterra EZ Hose Carrier - Black, part # VA82VR. This is the etrailer part number for the Dometic A04-0338BK.
I have included a video review link below. view full answer...
I was not able to find a direct replacement lid for your 2020 Keystone Bullet Crossfire. The closest I was able to find to what you're needing is the:
-Multi-Purpose Access Door for RVs - 6-3/4" Diameter # 37231025 for white,
or the,
-Multi-Purpose Access Door for RVs - 6-3/4" Diameter # 37231035 for black.
These access doors measure 6-3/4" diameter, 3/4" deep, and has a hole opening of 5".
Additionally, this access door requires a 5-1/2" diameter x 3/8" deep cutout. view full answer...
We do offer the complete replacement end at a reasonable price like Replacement Cap and Saddle part # A04-0448BK but do not offer just the door. view full answer...