I have a solution for you but we don't have a replacement bracket to replace the support and bolt that was broken on your TorkLift GlowStep similar to the # TLA8004 . Instead you would need to use the Add-A-Step for TorkLift GlowStep Revolution Scissor Steps # TLA8101 which will work on any TorkLift GlowStep models with the 25-7/16" wide mounting base. You can use the parts in this kit to replace your broken parts or replace an entire step.
If you have the 27-7/16" mounting base model... view full answer...
I would be more than happy to help you find replacement steps for the Scs/Frigette 733-0074 steps on your 2008 Monaco Dynasty Renaissance IV!
We don't have any exact conversions but we do have replacement 2-step steps that you can potentially use. You'll just want to choose the steps that fit your application best.
The 42 Series Kwikee Step # LC372779 is 25-1/4" wide and has a mounting plate that is 30-1/4" wide x 24-11/16" deep.
The 47 Series Kwikee Step # LC427247 is 26-1/4"... view full answer...
The motor for the 1999 and older style Kwikee Series 23 steps is no longer available, but they do have a replacement upgrade motor that will work.
For your older style of Kwikee Series 23 RV steps the Lippert Components Kwikee Step Motor Conversion/Upgrade Kit # LC379145 is the correct kit to use. This will upgrade what you have to the current style of motor and module.
This motor upgrade kit for is a very popular upgrade kit which works with most Kwikee Steps. It offers an improved... view full answer...
According to Lippert, the correct replacement for your 9010000464 model Kwikee Revolution Steps is the Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series # LC3725791. If you want the complete assembly with the override switch you will also need the # LC369311. view full answer...
If you currently have the Triple Step, SolidStep Manual Fold-Down Steps for 25" to 28-7/8" RV Door Frames, # LC791572 and prefer a quad step, I suggest part number # LC791574. This is the same SolidStep for 25" to 28-7/8" RV door frames but in a quad configuration and will mount exactly the same your current install. view full answer...
The # LC3747452 is the replacement step, motor, and control for the 28 series Kwikee RV Electric Steps. If you have a 28 series unit then yes this is what is needed. Please look for markings on currently installed steps to identify series or compare measurements. The mounting plate is 24-1/4" wide x 8-5/8" with a bolt pattern of 22" x 6-1/2". view full answer...
For the Replacement Step Frame for Kwikee 28 Series Electric RV Step # LC3747457 you referenced, the linkage arm you want is found in the Motor Upgrade Kit for Kwikee Electric RV Steps # LC379145. This linkage arm is not available by itself. view full answer...
I spoke with Lippert and they said the Kwikee Electric RV Step Complete Assembly, 40 Series, # LC3726892 will be a direct replacement for the Coach Steps 725-0043. It will be a bolt-on install for replacement of the steps.
view full answer...
While we do not have the ability to pull build sheets from the OEM to identify what part was installed, I think you may have the Lippert Kwikee 28 Series Electric Step # LC3747452. This is a great single step option that is extremely popular as an OEM application.
This step has mounting bracket dimensions of 24-1/4" wide x 5-7/8" tall x 8-9/16" deep (see attached images). Please verify this against what is currently installed on your 2017 Thor Hurricane Motorhome. If your current... view full answer...
I checked with Lippert and the Kwikee 26 Series step does not have an available frame replacement for it, so you will need to replace the entire step assembly. For a new Kwikee 26 Series Step you'll want to use the # LC3711361, which fits on coaches with a 20-1/2" x 7-1/2" bolt pattern and is an electric step with 1 riser that does not contact the ground.
I've linked a review video of this part for you to have a look at, as well. view full answer...
If you can let me know what parts you need to replace I can look into it, otherwise the only solution I know that will take care of your problem is to replace the entire step assembly with part # LC3756271 which is a Kwikee 36 Series single step. view full answer...
My contact at Lippert confirmed with me that the replacement step for LCI model 168367 will be the Lippert Kwikee 27 Series Electric Step, # LC375632.
The Lippert Kwikee step features an automatic shut-down is step interacts with an obstacle. The step is made of heavy-gauge steel and sealed wiring connectors will help keep the weather elements out to provided for longer use life.
view full answer...
I do have an option for you but the Kwikee Steps with gear box 151320 are too old and there are currently no replacement parts for this. The only option would be to replace the entire steps for which we have Kwikee Electric RV Step Complete Assembly part # LC372261. view full answer...
I reached out to the manufacturer, Lippert, about the problems you were having and they told me the issue is your control module on the Kwikee 25 Series # LC3658373 being the wrong one. They said (rather bluntly):
"You cannot use a Kwikee controller on a Coach step. The correct part number is 301702."
So to remedy this issue what you need is the Replacement Control Module for Lippert Electric Coach Step # LC301702.
I have added a link to a video review of this part for you to... view full answer...
For the replacement gear you will use the Replacement Entry Step Gear for Lippert Kwikee 25 and 26 Series Triple Steps # LC369354. I believe the shear pin you are referring to is a part of the gear itself. The motor is # LC369506 which comes with the smaller gear.
If you want to replace the entire assembly you can use the Lippert Components Kwikee Step Replacement Kit # LC379804. view full answer...
According to the Kwikee Step folks at Lippert, the # LC3724742 Series 39 step will indeed work with your current wiring and will bolt up just like your current set of steps. The folded height would be definitely place the bottom of the step assembly closer to the underside of your RV, so if you're looking to maximize ground clearance, the series 39 like # LC3724742 would be a good choice. I've linked you to a demonstration video showing a typical installation. view full answer...
Based on the information you have provided (thank you!) I can confirm that the steps you need are the Lippert Components Kwikee 32 Series Double Tread Electric Step Item # LC372261. This will be a direct replacement for the steps you have! view full answer...
If your 2020 Jayco Class C currently has the Kwikee 26 Series, 23-1/2" wide steps installed, the Replacement Step, Motor, and Switch for Kwikee RV Electric Steps, # LC3711361 is a direct replacement. This is the same model and build used by the OEM's. view full answer...
I recommend using the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 4 Steps - 20" Wide - 375 lbs # TLA7804-8000. These are a 4 step system that has glow tape on the steps to help with visibility at night, and the adjustable landing gear help stabilize the steps on un-even ground and they'll work for entry heights between 31" and 42" tall. These aluminum steps are light weight and easy to move up and down, as well as remove during travel, so they're perfect for truck campers.... view full answer...
The Kwikee Electric RV Step Complete Assembly - Double - 32 Series - 24" Wide # LC372261 is a compatible replacement for your coach step 733-0001 steps. It has a 23-3/4" wide x 11-3/8" deep mounting plate dimension and a bolt pattern of 22" wide x 8" deep. view full answer...
When choosing a replacement set of RV steps, the important measurements to consider are the dimensions of the step's housing that actually bolts to the RV.
For instance, the # SMFP-2100 you referred to has a housing that measures 27-5/8 inches long by 9-7/16 inches tall by 12 inches deep, as shown in the provided photo. If the mounting location on your RV can accommodate the size of the housing, these steps would work great! The best way to determine fit is to measure the housing of... view full answer...
I reached out to my contact at Lippert Components and confirmed the replacement steps based on the 903206000 number you gave are the Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261. This is the exact replacement for your 2004 Itaska Motorhome view full answer...
I have no way of confirming what your 2004 Georgie Boy had as original steps, but the Lippert Kwikee 23 Series Electric Steps - 3 Steps - 8" Drop/Rise - 24" Wide - 300 lbs # LC3694042 are a very strong possibility as Lippert does steps for many manufacturers and are the leader in electric RV steps. I've attached a photo to help you with some of the profiles of the steps when retracted and extended so you can confirm the fit and determine if there is an issue.
If you need the replacement... view full answer...
We have a wide selection of steps available so I am certain that we can locate a suitable replacement step for you. While I can not provide you with an exact part number for your current steps installed by the builder of your 2014 Keystone Cougar Half-Ton Fifth Wheel, I can locate options. From what is available to me online I suggest the Alumi-Tread Manual Pull-Out Step with 9" Drop/Rise at 24" width, # LC432696. They measure 24" wide for the step but the overall width is 27-1/2" please... view full answer...
The Lippert 171317 steps you've currently got have been discontinued, but you can use the Kwikee 32 Series Electric RV Steps - Double - 7" Rise - 22" x 8" Bolt Pattern # LC372261, which according to Lippert would be a direct replacement. These powered steps are 25-1/4" wide and work on entry heights taller than 13-1/2"; they'll also open and close when in conjunction with your coach door, so they're a great choice.
If you take some measurements and determine that you need a different... view full answer...
The Lippert Kwikee 38 Series Electric Step - 1 Step - 4" Drop/Rise - 24" Wide - 300 lbs # LC3723383 are the replacement for the original 38 Kwikee steps you mentioned. You will just want to confirm the step dimensions of 24 by 10-3/4 inches and the mounting dimensions of 25-3/4 wide by 5-3/4 tall by 11-3/8 inches deep. view full answer...
The correct replacement step for your 28 Series Kwikee step with the part 902809025 is actually listed as part # LC3747453 on our site.
If you are just needing the replacement frame for this step it is part # LC3747457 while the replacement step motor kit is part # LC379608. view full answer...
We do have a few options for you to choose from to replace the single step on your 2017 Keystone Springdale 245RB.
Out of the available choices I recommend either going with the SolidStep Manual Fold-Down Steps # LC791572 which mount to your threshold or, if you want the same style step, the Hickory Springs Manual Pull-Out Steps # 95324EXTALC1 and using the Outriggers # LC301704 to relocate your mounting brackets.
You are correct that there are no steps with mounting brackets 26"... view full answer...
The replacement step you need for your 2004 Monaco Dynasty is the Lippert Components Kwikee 35 Series Single Electric Step # LC3691462 based on the number you gave. Let me know if you have any further questions. view full answer...
Trailer and other RV makers do not maintain specs on smaller items like the steps they install on their RVs but it is not difficult to find replacements based on size. The linked page displays RV and camper steps that are offered in many types.
For instance if you wanted a 2-step manual pull-out type you will simply click on those two features to then see all such steps. The just match your step width.
For instance, Lippert 2-step manual pull-out step # LC432682 has a mounting base... view full answer...
The correct replacement for your SCS/Frigette Coach Steps 725-0023 is the Lippert Kwikee 25 Series Steps # LC3658373. This comes with the motor, control unit, and the switch. The steps on this unit do measure 24" wide x 11" deep just like what you currently have.
I confirmed that this is the correct replacement for you with my contact at Lippert. Attached are some review videos for you to check out. view full answer...
It is usually a straightforward process to replace an existing RV step unit with a new one, perhaps one with more steps or one with a different height between the steps, or even an electric one. We have 2-step units in manual and electric models and all are shown on the linked page. Unfortunately RV makers do not maintain specs on items such as step assemblies.
What you want to do is measure your existing step's overall width and the center-to-center spacing of its mounting holes. Click... view full answer...
Yes. The Kwikee 32 Series Electric RV 2-Step - Motor, Control, Switch # LC372261 is a complete and direct replacement for your existing Series 32 steps. These steps have a 22" x 8-3/4" bolt mounting pattern and will work on your 1997 Southwind Storm 34. view full answer...
For you 2016 R-pod trailer I recommend the Lippert Manual Pull-Out Step for RVs - Double - 7" Drop - 24-1/4" Wide - Steel - 300 lbs # LC432682. This is 25-1/2 inches wide at the mounting bracket with two 24 inch steps. It will have a 7 inch rise which is smaller than the traditional for easier use. This may require the Lippert Outriggers for Manual and Electric RV Steps # LC301704 for mounting if your current mounting is 26 inches wide.
If you want even more stability you can use... view full answer...
I reached out to my contact at Lippert and they said the number you gave is for an entire 23 Series Kwikee Step. These steps have been used for a long time, so depending on your model year, there are some different requirements for replacement parts.
If you have a 1999 or older model, you will need to replace the entire step with the Lippert Components Kwikee 23 Series Triple Tread Electric Step # LC3694042.
If you have a 2000 to October of 2005 model, you will need the update kit.... view full answer...
The Lippert Kwikee 32 Series Electric Step # LC372261 is the correct fit for your replacement step on your 1999 Winnebago Chieftain. You will also want the mounting hardware # LC118155-72 for installation. view full answer...
We do not have a database that tells us what steps are on your 2005 Jayco Greyhawk Class C, but the Lippert Manual Pull-Out Step for RVs # LC432682 are 24-1/4" wide, so as long as your door opening is around that size these would be a good option. These can either be welded or bolted onto your trailer frame, and they should be relatively easy to install.
With that said, I recommend instead going with the SolidStep Manual Fold-Down Steps, which are a 2 step setup designed for entry heights... view full answer...
The exact step you have is the Lippert Electric Tread Lite Step for RV # LC353543. Since the motor and linkage of the step set can't be accessed from the bottom you'll have to un-bolt the steps to access the motor area and see what the issue is. From there you should be able to see where the problem is. view full answer...
RV makers typically do not maintain detailed specs on items like the step assemblies they install in production of their trailers like your 2017 Keystone Premier 26RB bumper-pull. Based on my research your OEM step unit was a 3-step manual type.
The easiest way to find suitable replacement steps is to measure the mounting hole spacing where the original steps are installed.The linked page displays all 3-step units, such as the Flexco # SMFP-3100.
This step assembly is 24-inches wide,... view full answer...
RV step assemblies are usually off-the-shelf items that are often interchangeable so long as their size and mounting dimensions match. You can see all 3-step units we offer, both manual and motor-powered types, on the linked page.
We carry Lippert Kwikee Series 23, 24 and 25 electric steps. You will want to note your existing steps' mounting dimensions as you review these options. We list the mounting hole dimensions for the steps to help you select a match. For example, part # LC3658373... view full answer...
Your photo did not make it through to us but we can still help you select replacement steps for your Jayco Jay Flight 28BHStravel trailer.
The RV steps we offer for towable trailers come in several overall widths. You can see all sizes and models on the page I linked for you. You will want to match the overall mounting pattern of the new step to your existing unit. You will also want to ensure the new step unit does not reduce your ground clearance; keep the existing step's retracted... view full answer...
I do have replacement parts for you but I called Lippert and they said that there is not an upgrade kit for any of the Coach Steps. Therefore, you can either replace the damaged components or upgrade the steps entirely to the new Lippert Kwikee 32 Series Electric Step part # LC372261. If not the replacement parts you need are as follows:
Motor - part # LC301695
Controller - part # LC301702
Gear Plate - part # LC301696 view full answer...
We currently do not carry the correct replacement for your Coach Step Model 168367. Instead, I recommend repairing the steps you have now as this will be much more cost effective and won't require any drilling. For this you can use the Replacement Motor part # LC301695 and or the Replacement Control Module part # LC301702. view full answer...
There are and were numerous 2-step Kwikee electric steps available. To ensure we get you the correct replacement I would need to know the series of the steps you have. Check the underside of your steps for any model numbers or other information.
The current available models are the 32 Series # LC372261, 42 Series # LC372779, 40 Series # LC3726892, 34 Series # LC3722863, and Platinum Series # LC372558. Any information you can find on your steps will help narrow it down. view full answer...
We do offer replacement mounting hardware kits for your Karrite Voyager rooftop cargo box. The best choice for replacement mounting hardware for your Karrite Voyager cargo box is our kit # TH05603. This kit consists of u-bolts, plates and knobs to secure the carrier on your vehicle roof rack.
view full answer...
We have the Lippert Components Kwikee Step Gear/Linkage with C for 26 Series Kwikee Steps # LC379162. Then you will need the motor # LC379608.
We also have the complete repair kit for your Kwikee Series 26 steps if you prefer updating the components all at once. The Lippert Components Kwikee Step Replacement Kit Link Assembly C and 9510CU # LC379801 contains an integrated motor, gear box, linkage kit C, and control unit. Basically the repair kit replaces everything except the frame. view full answer...
We have several replacement parts for the Kwikee 26 Series steps depending on what you need. We have some different switch kits, # LC371010 and # LC369311, so if you believe the switch is the problem select the one that matches what you have.
We also have Link Assembly C and 9510CU # LC379801 which is pretty much all of the electrical and mechanical components that operate the steps. view full answer...
You will need to take a couple of quick measurements to see if the replacement steps we offer will work on your Forest River Trailer.
One of the 2-step pull-out steps we offer is the Flexco Manual Pull-Out Steps, part # SMFP-2100. This has a retracted height of 9 inches and is designed to be mounted in a space that measures 27-5/8 inches wide x 12 inches deep. The steps are 24 inches wide. Per Lippert, the 2-step Lippert # LC432682 step will fit in the space that the single step was... view full answer...
I believe you are looking for the Replacement Low Profile Plunger Bolt for Lippert SolidStep 3.0 Stairs part # LC436574. Check out the video I linked for you on it. view full answer...
The Lippert Components Kwikee 42 Series Double Tread Electric Step # LC372779 is the entire assembly including motor, wiring, and controller. I confirmed this with my contact at Lippert to make sure you wouldn't be missing anything.
If you have all the components and just need the motor table, then you will want # LC372749.
If you need anything else let me know. view full answer...
For your 2015 Forest River Sunseeker, the 163033 you referenced is a 4 inch wide single coach step. You can simply swap out that step for the Lippert Electric Tread Lite Step for RVs - Single - 5" Drop/Rise - 24" Wide - Aluminum # LC353542 you referenced.
The mounting bracket dimensions are 25-5/8" wide x 6" tall x 18" deep. It will use Mounting Hardware for Lippert Electric and Manual RV Steps # LC118155-72. view full answer...
We do offer all sorts of replacement step/stair assemblies for RVs. These include manual pull-out steps like # SMFP-3100, scissor steps like # TLA8004 and others, all shown on the linked page. You will want to match up the mounting hole spacing from your original steps since it is quite likely that one of our units will fit directly in place of it. You will also want to ensure you select a step that does not reduce your ground clearance once installed.
You can simply click on the type... view full answer...
We do offer replacement manual pull-out RV step assemblies like the 3-step unit on your 2016 Coachmen Freedom Express Liberty Edition travel trailer. You may be able to change to a 4-step unit so long as you do not lose any ground clearance when the step is retracted for travel. There are no modification kits to add a 4th step to a 3-step unit.
On the linked page you can see the 4-step assemblies for travel trailers. These are available in two widths and with varying height between the... view full answer...
The 2018 Dutchmen Coleman Lantern LT 16FB travel trailer appears to have a single-step OEM entry step. If you want to convert this to a 2-step you want to note the overall size of the step unit, the mounting hole spacing and also the retracted height. You do not want to risk reducing your ground clearance with a new 2-step unit.
Most 2-step pull-out steps for towable travel trailers are 24-inches wide like # SMFP-2100, which is the item you referenced, and like the other similar steps... view full answer...
I spoke with my contact at Lippert who informed me that the 216945 that you referenced is no longer sold but there are replacement steps for you.
The Kwikee 25 Series Steps # LC3658373 will replace your steps directly. They have a rise of 8" and a run of 9" with a weight capacity of 300 lbs. My contact at Lippert confirmed this is the replacement that you need. view full answer...
Knowing the width of your steps is a good place to start when looking for replacement steps for your 2010 Jayco Eagle.
The next thing you will need to do is determine how far it needs to drop. For example, the Lippert Alumi-Tread Manual Pull-Out Step # LC432698 drops 29-3/8" from the top of the installation brackets to the top of the bottom step.
I have also attached photos of the dimensions for the mounting holes and the steps when they are folded up. You will need to use these... view full answer...
The 151320 gear box is for a Kwikee step, but unfortunately that model gear box is no longer available as a replacement part. Because of this, your only option at this point is to replace the steps entirely. If you had a Kwikee 32 Series step you would need Lippert Kwikee 32 Series Electric Step # LC372261, for example.
If you let me know what steps you have I would be happy to help you find a replacement. view full answer...
We have new step options for your 2018 Forest River Shockwave 25RQMX toy hauler travel trailer that has had an axle over-under kit installed. All manual and electric steps are displayed on the linked page. Based on my research the OEM unit is a 2-step manual pull-out step.
Just in case you want to consider a potentially easier option we do offer large free-standing platform steps like # S-150 and others shown on the linked page. These cost less than new pull-out steps, offer a much larger... view full answer...
The Lippert Kwikee 32 Series Electric Step - 2 Steps # LC372261 is the replacement step for your 903206001 on your 2003 Discovery. They should easily install without modifications needed.
view full answer...
From what I can find online, your 2018 Mallard M33 has MoRyde steps from the factory. The dimensions of these steps I cannot find, so you will need to take a measurement. The Torklift steps you need will be the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear - 3 Steps - 27-7/16" Base - 350 lbs # TLA8003 or the 25-7/16 inch base # TLA8103. view full answer...
I can absolutely help you out, but in order to find out exactly which steps Winnebago intended for your Micro Minnie 2306BHS to use, you'll want to measure the distance inside of your door frame and from the floor of the camper to the ground.
It's most likely that your Micro Minnie 2306BHS has 24-1/2" inside the door frame and I've seen that similar campers have around 22-24" from the ground to the floor. For that reason I recommend the SolidStep Manual Fold Down Steps # LC713662 which... view full answer...
The # LC372779 is a direct replacement for LC369311 and any 42 series steps. Step dimensions are 25-1/4" wide x 9-1/2" deep with a Drop/Rise of 6", please note the product review video that is linked. The 24 series has a 30 inch wide step and the 34 series has a 30 inch wide step. Please see the links to these options. view full answer...
I'm assuming you're needing the gear box and linkage for your Kwikee Series 32 RV steps. If that's the case, you'd need the # LC379160 gear box/A linkage. Just to make sure, I checked the compatibility with Lippert, the owners of Kwikee and they've confirmed the fit.
I've linked to a product description video for the # LC379160 gearbox/linkage. view full answer...
When choosing a replacement set of RV steps, the important measurements to consider are the dimensions of the step's housing that actually bolts to the RV.
The # LC3747453 has mounting plate dimensions that measures 24-1/4" wide with a 22" wide x 6-1/2" deep bolt pattern, as shown in the provided photo.
If the mounting location on your RV can accommodate the size of the housing, these steps would work great! The best way to determine fit is to measure the housing of your existing steps. view full answer...
With your current step being the Lippert Kwikee 28 Series Electric Step # LC3747451, the Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261 will be just slightly bigger and also have the extra step. It will come with all the new electrical components you mentioned, so you will get the motor, controller, and switch kit with the step.
The difference is in the mounting bolt pattern. Your old step had 22 inch by 6-1/2 inch mounting bolt pattern and the new step has... view full answer...
I recommend the TorkLift GlowStep Revolution # TLA8103 . This is a 3 step set with an 8" drop/rise that have an easy-to-use lever that lets you change between 3 height settings for proper elevation and will work for trailer entry heights of 25-1/2" - 36" tall. I really like that there is Glow tape on the steps to create a lighted step surface for safely climbing into and out of your camper at night. The mounting plate dimensions for these steps are 25-1/2" wide x 13-7/8" deep so you'll... view full answer...
So we can get you a replacement for your Kwikee 33 Series steps, though I verified with Lippert (who manufactures the Kwikee steps) that the assembly (frame) by itself is not available as a replacement, as you can see by the cut out I added below. For replacement, you would need to get the full assembly, which is the following:
- Kwikee Electric RV Step Complete Assembly - Single - 33 Series # LC3722661
I have added a link below to a video review for you to check out as well if you'd... view full answer...
The issue you are having with your Kwikee 28 Series Step is a bad motor. I do have an option for you but the cutoff date for replacement parts on Kwikee Steps is 1999. Therefore, they do not make a replacement motor that will work with your Kwikee Step due to its age. The only option you have is a full replacement, the Kwikee 28 Series Electric Step part # LC3747451.
If you want to switch to a more cost effective manual pull-out step you can use the Lippert Manual Pull-Out Step part... view full answer...
You can use the Kwikee step as a replacement for your other brand of step. The 4 wires will be the same, the connector may be different but you can splice in the new connector. Because you are switching style and brand you will actually want to use the Kwikee Electric RV Step Complete Assembly # LC3747453 which is the entire assembly. The Replacement Step, Motor, and Control for Kwikee RV Electric Steps # LC3747452 will only provide the step, motor and control. The # LC3747453 kit will... view full answer...
Lippert no longer offers the individual steps as a replacement part, but the motor is available as part # LC301695 and the control module is part # LC301702,
If the step in question was bent, it might be possible to straighten it, as the steps, slide rails and step link plates are no longer available.
If you'd care to reply with the number of steps in your current unit, and the width of the steps I'd be happy to recommend a replacement. view full answer...
Since you can't fold in the steps on your 2018 Winnebago Minnie I recommend the MORryde Quick Connect RV Steps for 21-1/2" to 27-1/2" Entry Height - 2 Steps # MR73RR. The mounting bracket for these steps attaches on the outside below your door.
Since they are removable they can still be stored to keep them protected just like fold in steps. They are also adjustable so they will remain sturdy even on uneven land. These steps are designed for an entry height of 21-1/2" to 27-1/2". view full answer...
For a Kwikee 28 Series Steps # LC3747453 on your 2016 Thor Palazzo 33.2 you will need the Replacement Gear Box and B Linkage # LC379161 and the Replacement Motor # LC379147. We also have the Replacement Control Unit # LC379146 if you need that as well. view full answer...
We have the Replacement Hardware and Backer Plate # LC702580 you need for your SolidStep Manual Fold-Down Steps # LC791573.
We also have the SolidStep Locking RV Storage Box # LC664640 that will replace folding steps and give you additional storage space. view full answer...
Yes, you can use the Flexco Manual Pull-Out Steps for RVs - Quad - 8" Drop/Rise - 24" Wide - 300 lbs # SMFP-4400 for your replacement steps on your 2013 Cedar Creek 5th Wheel 36CKTS. I have attached pictures of the dimensions of these steps for you to determine if this will be a good fit for your needs. This will give you a little over a 27-1/2 inch drop from your frame when fully extended.
For a slightly longer drop, you may be interested in the Alumi-tread # LC432698. This 4 step... view full answer...
We don't currently carry the bolt and cotter pins that fit the TorkLift GlowStep Camper Scissor Steps - 5 Steps - Aluminum - 20" Wide - 325lbs # TLA7805 but we do carry the pin lock # TLA7509 that you could put in its place and add some security to your steps so no one can take off with them. view full answer...
while yes the Replacement Door Switch for Lippert Electric Coach Step, # LC301694 that you refer to can possibly be made to work another brand, I highly recommend you identify what steps you have so we can provide the best option in replacement part. view full answer...
The 12V Replacement Motor for Kwikee Electric RV Steps, # LC379147 is the correct replacement motor for Kwikee 32 Series Steps.
For 34 Series Steps, Replacement Motor with Mounting Plate, # LC379608 for 2000-2005. And for 2006-Dec 2018, # LC379147 or 2019-Present, # LC62FR.
My recommendation is to remove your current motor and look part number/visually compare to images on our product pages. view full answer...
We do have the replacement motor and gear box for the Kwikee 32 Series Electric RV 2-Step - Motor, Control - 22" x 8-3/4" Bolt Pattern # LC3722615 that you're looking for. The replacement parts are as follows:
- Replacement Motor with Mounting Plate for Kwikee Electric RV Steps # LC379608
- Replacement Gear Box and A Linkage for Kwikee Electric RV Steps # LC379160 view full answer...
The correct replacement for a Kwikee Step Motor 369545 is the Replacement Motor for Kwikee Electric RV Steps part # LC379147. I was able to confirm this with Lippert for you. view full answer...
The part number you list is associated with 32 series steps. If you have original Kwikee 32 Series steps on a 2003 Coachmen Cross Country Motorhome, then the replacement motor that you are looking for is the part # LC379608. view full answer...
We do offer quite a few powered and manual replacement RV steps so I understand the challenge of figuring out the right ones for any given RV.
The key to selecting replacements is knowing the overall size of the step unit, the step mounting hole spacing, both left-to-right and front-to-back as you're looking at the RV, and the retracted height, which affect ground clearance. We provide this information for all of our RV steps. The Kwikee 32 Series Double Tread Electric Step # LC372261... view full answer...
On of our most popular 3 step options is the Lippert Manual Pull-Out Step for RVs - Triple - 7" Drop/Rise - 24" Wide - Steel - 300 lbs # LC432687. This step has Mounting base dimensions of 27-1/2 inches wide x 9 inches deep. The bolt hole centers are 26-1/4 inches wide x 7 inches deep.
We also have electric step options like Lippert Components Kwikee 25 Series Triple Electric Step # LC3658374.
If you let me know your bracket dimensions and mounting hole dimensions, I can confirm... view full answer...
The # SMFP-2100 Flexco Manual Pull-Out steps aren't a camper-specific item, it can fit many different applications. You can very easily determine if these will replace your existing steps by measuring them. This unit will fit a well that's up to 27-5/8 inches wide and 12 inches deep. If the available space will accommodate them, these steps would work great for you.
I've provided photos showing the dimensions of the step unit.
Unfortunately, don't have any information that would tell... view full answer...
We offer replacement pull-out trailer steps in various sizes and designs, including scissor steps like the TorkLift GlowStep Revolution # TLA8103 that you referenced. You will want to check the mounting base dimensions of your existing step to confirm compatibility (trailer makers do not maintain detailed records of the step assemblies used in production so measuring is needed).
The GlowStep Revolution # TLA8103 has a mounting base that measures 25-7/16- wide x 12-inches deep and it... view full answer...
The Lippert Electric Tread Lite Step, Item # LC353542 is a solid electric step that will serve you well. You will need to check to see if the Lippert Tread Lite will mount in your current step space and that you have suitable mounting points. You can measure the spacing and confirm a fit. The mounting hole spacing is 22-inches. See attached photo for more details. The step is rated for 400 lbs. view full answer...
We carry a wide range of replacement RV and trailer step assemblies and these are offered in several sizes and step counts. Based on my research the 2011 KZ Sportsmen 290 travel trailer comes fitted with a 3-step manual unit, one like # LC432690 from Lippert. You can view all of our RV 3-step options on the linked page.
The dimensions you provided are useful but the key is to match up the mounting hole spacing. The step unit I referenced has mounting base dimensions of 27-1/2 wide x... view full answer...
For your 2010 Coleman Niagara, the dimensions you gave are a big help. There isn't a perfect fit for the current setup, so you will need to use what is called an outrigger. You can use the Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 20" Wide - 300 lbs # SMFP-2120 along with the Lippert Outriggers for Manual and Electric RV Steps # LC301704 to give you the correct fit and stability. You will use hardware # LC118155-72 to make them compatible.
Note--You may use... view full answer...
The correct replacement step/frame for the Kwikee 34 Series Electric RV 2-Step part # LC3722862 is the Replacement Step Frame for Kwikee 34 Series Electric RV Steps part # LC3722864. If you want to instead use the Kwikee 34 Series Electric RV 2-Step part # LC3722863, you'd simply need to transfer the controller over. view full answer...
We do carry replacement leg tips for Safety Step Folding Platform Step, part # SASS-07C-S. The part number for a set is # SAS21HD-30 and the price is on the product page if you follow the link.
The step is also available in other colors:
# SASS-07C-BLK - Black
# SASS-07C-Y - Yellow
# SASS-07C-P - Pink
# SASS-07C-V - Silver Vein view full answer...
Trailer makers typically do not maintain details about items like the steps that they install on their RVs so for you to select a 2-step assembly to replace a single-step unit you'll just need to note some basic dimensions.
First, you want to check the size and spacing of the mounting holes on the frame that are used to secure the current steps. Our 2-step assemblies come in 20-inch and 24-inch widths, both shown on the linked page, and the distance between the two steps is also variable.... view full answer...
If you are looking to replace your steps then I do have a solution for you. We carry the Outriggers # LC301704 which can be used to install the Flexco Manual Pull-Out Steps # SMFP-3100. The outriggers are a bolt-on installation (which may require drilling) so after getting your old steps cut off you simply bolt these on. Just be sure that you have enough room for the 28-1/8" wide mounting brackets for these steps.
We also carry parts of various step assemblies but I would need to know... view full answer...
For a set of 2-step Flexco RV manual pull-out steps that are 24-inches wide you can use part # SMFP-2100. This step assembly offers a 350-lb weight capacity and 7-7/8-inches of rise/drop between steps. The 24-inch wide steps are 9-inches deep.
Mounting holes are spaced apart 8-inches front-to-back and 26-1/8-inches left-to-right. view full answer...
The best replacement step for your 2014 Cedar Creek 5th Wheel with a 29" door opening and 39" entry height is the SolidStep Manual Fold-Down Steps # LC791574 . These steps are designed for RVs with entry heights between 35" and 44" tall and provide with an adjustable bottom leg for stable ground contact that will eliminate the bounce experienced with some steps. view full answer...
The OEM step supplied on a 2015 Forest River Blue Ridge 5th wheel is the type that does not contact the ground. To replace your 3-step like this with a 4-step unit I suggest the Flexco Manual Pull-Out Steps for RVs # SMFP-4400. These are designed to bolt on in place of the OEM steps on most RVs. Note this unit has slightly larger bracket dimensions of 28-1/8" wide x 18-1/2" tall x 12" deep. Depending on the brand and model of step unit that was originally installed you may need to use Outriggers... view full answer...
We offer RV pull-out steps in several widths and rise/drop distances. The closest to your dimension and preferred rise is the 4-step Flexco Manual Pull-Out Step # SMFP-4400. You'll want to measure the mounting hole spacing on the frame of the Cedar Creek to allow you to select a replacement that will bolt right up. This Flexco step's mounting holes are spaced 25-3/8-inches left to right and either 5-inches or 7-inches front to back, as shown in the linked photo.
Please let me know the... view full answer...
We have had similar questions about Part # 151332. According to Lippert, who makes the Kwikee steps there is no longer a replacement available for that particular part number. According to Lippert you would need to replace the entire step unit.
The current version of the Kwikee series 28 step is the Kwikee Electric RV Step Complete Assembly - Single - 28 Series # LC3747453 which is 23-5/8" wide x 10-1/2" deep. view full answer...
For a triple step for your RV the Lippert part # LC432687 could be made to work on your trailer. If your current mounting brackets are welded to your trailer you could have them removed and then rewelded to the appropriate position.
The overall width of the mounting brackets of this step are 27-1/2 inches and the mounting holes are 26-1/4 inches apart. view full answer...
For replacing your Lippert Kwikee Electric Steps I suggest the Lippert Manual Pull-Out Step for RV's, # LC432682. This step is very similar to the Kwikee steps currently however, they will mount slightly different. These will probably require you to drill a few holes as finding a direct replacement with matching mounting holes is probably not possible. These steps have built in water channels and anti-skid tread strips. They have a 300 lb. weight capacity and come with a one year warranty.
Please... view full answer...
You are correct that the part # LC3691461 is the complete kit Lippert Kwikee 35 Series of steps. We don't have just the frame alone for this model but we do have the part # LC369146 which is the frame, motor, and module and does save some money. view full answer...
Go To Results