Expert Answers about Spare Tire Bike Racks
- Replacement No-Sway Cage for the Thule Spare Me Spare Tire Bike Rack
- The Replacement No Sway Cage, # 753-3530, will work with your Thule Spare Me bike rack. This stabilizer was designed to work with the T3 cradles that came on your bike rack. If you also need a replacement strap use # 852-3006-001.
view full answer... - Replacement Lockable Knob for Thule Spare Me Spare Tire Bike Rack
- Yes, the Replacement Lockable Knob for Thule Spare Me Spare Tire Bike Rack # TH93NW has the M8 rod attached to it like what you show in the photo you submitted, and it will work with your Thule Spare Me bike rack no matter what generation you have so you're good to go!
I confirmed this with Thule directly.
view full answer... - Replacement Carriage Bolt for the Thule Spare Me 2 on a 2013 Jeep Wrangler
- It sounds like you're needing the long bolt for the Thule Spare Me 2, part # TH963PRO. That Replacement Carriage Bolt is part # 915-0655-11.
As you said, there is no guarantee that the Spare Me 2 is in fact your bike rack, so I can't guarantee that this bolt will be exactly what you need. However, the Spare Me 2 is compatible with the 2013 Jeep Wrangler. So, there's a good chance that that is the rack that you have that this bolt will, therefore, be the one that you need.
view full answer... - Replacement Locking Knob For Yakima SpareTime Bike Rack
- The correct replacement knob for your Yakima SpareTime spare tire bike rack is the following:
- Replacement Locking Knob for Yakima SpareTime/SpareRide 2-Bike Rack # 8890239
view full answer... - How Do I Mount The Thule Spare Me 2 Bike Rack If I Have A Larger Size Spare Tire
- The Thule Spare Me 2 Bike Rack - Spare Tire Mount - Folding Dual Arm, part # TH963PRO, comes with the standard mounting bracket and a long mounting bracket.. The standard bracket is 2-3/4" in length and the long mounting bracket is 5-1/2" in length. If you do not have the long bracket you can get the Replacement Long Mounting Bracket for Thule Spare Me Bike Carrier, part # 752-1425-002. The last piece you will need is the Replacement Long Standoff Extension Adapter for Thule Spare Me 2,...
view full answer... - Replacement Bolt and Knob for the Thule Spare Me Bike Rack
- We have what you need here.
First, though, the Locking Knob with Bolt for SportRack Single-Arm, Hitch-Mounted Bike Carriers, part # SR0018, is not compatible with the Thule Spare Me Bike Rack, part # TH963PRO.
The correct bolt for that bike rack is the Replacement Carriage Bolt for Thule Spare Me Spare-Tire-Mounted Bike Carrier and Ski Carrier, part # 915-0655-11.
If you need the knob as well, then use the Replacement Arm Knob for Thule Spare Me Bike Carrier, part # 753-0737-10.
view full answer... - Replacement ZipStrip for Yakima SpareRide Bike Rack
- The correct ZipStrip replacements for your Yakima SpareRide # Y02599 are found as part # Y55XR on our site. These are an updated version so they will be slightly longer but they will work the same as what came on your bike rack originally!
The Replacement Wheel Strap # Y8820111 you referenced could potentially work but the "U" part of the strap is smaller than the ZipStrips because this is designed to secure smaller tires to a roof mounted bike rack as opposed to the frame of the bike...
view full answer... - Replacement Spare Tire Mount for Thule Spare Me Spare Tire Mount Bike Rack for a 2007 Toyota RAV4
- The original Thule 963 Spare Me bike carrier did not work on the 2006 to 2010 Toyota RAV4 because of mounting limitations with the original mounting plate like you have said.
The Thule Replacement Mounting Plate, # 753-3532, is the replacement plate that is needed in order for the older Thule 963 Spare Me bike carrier to be used on your 2007 Toyota RAV4 with factory spare tire.
The newer Thule Spare Me 2 Bike Carriert, # TH963PRO, includes the newer replacement plate which allows this...
view full answer... - Replacement Arm Knob for Thule Spare Me 2 Bike Rack
- For your Thule Spare Me 2 Bike Rack # TH963PRO, you will want the Replacement Arm Knob # 753-0737-10.
view full answer... - Yakima SpareRide Replacement Mounting Bracket Parts
- For your Yakima SpareRide there are a few parts that are needed to mount it to your spare tire. You will need the Replacement Back Plate # 8880578, Replacement Locking Knob # 8890239 and Replacement Long Stem # 8890241. The SpareRide also uses the Replacement Cable Lock Loop # Y8890255 and Replacement Cable Lock # 8890256.
view full answer... - Replacment Clamp or Cradle for a Hitch or Spare Tire Bike Rack
- I believe you are looking for a replacement cradle. We have a cradle, Swagman XP Replacement Cradle, part # 64860, that should work for you, but you will need to measure your bike rack first. The tube that the cradle mounts on cannot have an outer diameter greater than 2 inches. A 2 inch tube is the largest tube this cradle can fit.
view full answer... - Replacement Cradle for Rhode Gear Shuttle Trunk Mount Bike Rack
- If the frame tubing of your Rhode Gear Spare Tire Shuttle bike rack is 1 inch in diameter, the # RG8890084 replacement cradle would work for you.
view full answer... - Replacement Cradle for Rhode Gear Spare Tire Shuttle Bike Rack
- The only replacement cradle part still available from Yakima for the Rhode Gear Spare Tire Shuttle is the
# RG8890084 replacement cradle. According to Yakima, the Spare Tire Shuttle had a different diameter frame tube (1 inch) than other Rhode Gear racks, which is why the # RG8890083 wouldn't work unless you shimmed out the tube with tape or via some other method.
view full answer... - What Replacement Cradles and Straps Do I Need for My Swagman Deluxe Over the Spare Rack # 280501?
- Yes, I confirmed with Swagman that the Replacement Anti-Sway Cradles # SP499 will work with your Swagman Around the Spare Deluxe 2 Bike Rack # 280501.
view full answer... - Hitch Recommendation for 2001 Volkswagen Eurovan for Bike Rack
- For your 2001 Volkswagen Eurovan the Curt hitch part # 13217 is a confirmed fit and would work well. It does not have any restrictions on the spare tire mount either. This will give you a 2 inch hitch for your bike rack that will work well.
view full answer... - Replacement Mounting Brackets and Standoffs for Thule Spare Me Pro Spare Tire Bike Rack
- I have everything you need for your Thule Spare Me Pro 963 Spare Tire Bike Rack which I have attached for you below. Please let me know if you need any other replacement parts.
Short Mounting Bracket - part # 752-142-5001
Long Mounting Bracket - part # 752-1425-002
Short Standoff Extension - part # TH852-3482-001
Long Standoff Extension - part # 852-3305-001
view full answer... - Bike Rack Recommendation for Use with Bike Bunk on 18 Foot Fun Finder Camper
- I pulled up pictures of your 18 foot Fun Finder camper and since it has an A-frame like what the # CC-275 is designed to fit it would work well for you.
The trick to using this adapter and having enough clearance is going with a bike rack that then also requires minimal clearance like the Saris # SA4025F. This is a very then bike rack that is the best option for this adapter. See attached picture.
view full answer... - Replacement Cradle For Thule Spare Me Bike Carrier
- The replacement cradle for your Thule Spare Me bike carrier is part # 853-5829.
The rubber straps are sold separately. They are part # 753-3535.
view full answer... - Are Replacement Keys Available for The SportRack Spare Tire Bike Rack # A30813STL
- You could install the locking knob without using the key on the SportRack Spare Tire Bike Rack, # A30813STL, but you would not be able to lock the bike rack to your 2005 Honda CR-V.
If the lock core on your bike rack has a 4 digit number that begins with the letter N, then you could order replacement keys using that 4 digit number. If you use the link to the page I provided, link I have provided, you can enter in the 4 digit key number on that product page and order as many keys as you...
view full answer... - Replacement Mounting Plate for a Thule Spare Me Spare Tire Bike Rack on a 2004 Honda CR-V
- For your 2004 Honda CR-V and Thule Spare Me bike rack, we have replacement mounting plate # 753-3532. We also have a long mount bracket # 752-1425-002 if you need one of those as well.
view full answer...
Go To Results