The lifting strap length for the Erickson Lift Sling for Personal Watercraft # EM02000 measures 39" long and this sytem can handle up to 1,000 lbs.
This is a universal application and we haven't tested it directly with any specific watercraft so you'll want to determine if that 39" strap length is long enough for your situation. view full answer...
The inside diameter of the hole is 6 inches for the Seaflo Deck Plate for Boats # SE94FR.
Per the manufacturer, the inside diameter of this deck plate is 151 mm (a hair under 6 inches) while the outside diameter is 198 mm (a hair more than 7-3/4 inches). view full answer...
Currently we only carry deck plates in plastic like you currently have. Based on the dimensions you have the Seaflo Deck Plate for Boats - 4" Diameter White # SE83FR or Black # SE23FR is the closest we have. The outer dimension on this plate is 5-5/8" while the inside diameter is just under 4". The important measurement to check is the diameter of the cutout under your current deck plate. The ones we have will require a cutout of 4-1/2" to fit properly. view full answer...
The Erickson Lift Sling for Personal Watercraft # EM02000 comes with the hooks for both sides of the watercraft but there is just 1 kit for 1 watercraft.
Attached is a review video for you to check out. view full answer...
The SeaSucker Vacuum Cup Mount for Garmin GPS & Fish Finder # SS79FR can be used with your Garmin Striker 7sv. Although the holes on the back are pre-drilled to fit the mount from the Striker 4 and Striker 4cv the mount for your 7sv may also align with these holes. If it does not, SeaSucker says it is perfectly acceptable to drill your own holes in order to be able to mount your fish finder. view full answer...
The length of the two bars on the Erickson Lift Sling for Personal Watercraft - 1,000 lbs # EM02000 are 36 inches long.
It will work for hoisting the camper shell to a mounting location (up to 1,000 pounds), but the camper shell cannot be temporarily or permanently stored on the sling itself for storage purposes. view full answer...
Yes the Erickson Lift Sling part # EM02000 that you referenced does fit your 2020 Kawasaki STX-160. It has the weight capacity for the PWC and also has a clamp system that is perfectly compatible as well. view full answer...
I have no reason to believe your fixed mount davit will not lift your boat, that weighs 343 lbs with motor, if it is rated to lift up to 600 lbs. The Erickson Lift Sling for Personal Watercraft - 1,000 lbs, part # EM02000, will be perfect for lifting your boat, provided that all you are doing is lifting the boat. This sling is not designed for storage.
I have included a video demo link below. view full answer...
I have a couple options for you to carry your 10' inflatable boat on your 12' utility trailer as there is not a specific kit we carry that has everything.
First you can mount the CE Smith Heavy Duty, Vertical Bunk Brackets # CE10160GA-2 to your trailer decking. Then you can mount the Slotted Swivel Bracket # HP55FR for attaching your Bunk Boards # CE27840. You will need 2 sets of the vertical brackets and 4 swivel brackets to mount the 2 bunk boards. The Vertical brackets will need... view full answer...
Depending on the size of the gap you can just use a foam gasket like the Taylor Made Sponge Gasket for Boat Hatch Lids # 3691725 or Taylor Made Sealing Foam for Boat Hatch Frames - 8' Long x 3/4" Wide # 3691726. Both of these can be cut down to size and will stick to the body of your vehicle allowing your tail light to be removed easily when needed. view full answer...
Using a lift or hoist along with a sling like part # EM02000 would be the easy way of removing the PWC from the trailer and onto the dolly.
Six strong friends should be able to lift an average sized PWC without too much trouble, on average they weigh around 500-600 lbs. view full answer...
The lifting straps on the Erickson Lift Sling for Personal Watercraft, part # EM02000 measures 39-inches from the sewn pocket on the lift bar to the D-ring used for lifting the watercraft.
I have attached a photo showing the dimension you asked about. view full answer...
Yes, the SeaSucker Vacuum Cup Mount for Camera, GoPro, and DSLR item # SS29FR will work great with a surfboard. It uses vacuum mounts as opposed to suction cups to provide 120 lbs of holding power. view full answer...
The Erickson Lift Sling for Personal Watercraft # EM02000 that you referenced has a carrying capacity of 1,000 lbs, the research I did on your 1998 Sea Doo GTX indicates that it weights 576 lbs dry. So yes, this carrier should do well to carry your PWC. view full answer...
Yes. It looks like the Sea Doo Spark only weighs around 350-lbs and since the Erickson Lift Sling for PWC # EM02000 has a capacity of 1000-lb, it is well within the limits. While this can't be used for full-time storage, when used with your existing lift this sling provides a great solution for lifting your Spark in and out of a truck bed or trailer.
I've also linked our review video of this sling to this answer for you to check out. view full answer...
I went and measured the Seaflo Deck Plate for Boats # SE94FR and you are correct. The hole this will actually fit in will be just a hair over 6-3/8". The 6" measurement is the opening of the plate itself. view full answer...
The Erickson Lift Sling for Personal Watercraft # EM02000 that you referenced would work well for you as it has a 1,000 lb capacity. Since yours both weigh under 800 lbs they should both work just fine. view full answer...
The capacity of the Erickson watersport carrier lift sling # EM02000 is 1,000 pounds. A 900 pound PWC would be fine as long as it isn't carrying over 100 pounds of stuff or water!
Please note this sling is designed for lifting only and not to support the PWC indefinitely. view full answer...
Thanks for the photo of the Sea-Doo.
The Erickson Lift Sling, part # EM02000 has 36 inch long bars with 3 grips on each that will grip the Sea-Doo sides, right below the black hard rubber bumper. You will want to make sure you lift the boat slowly when using the sling. It is also noted that the sling is not designed to be used for storage. I noted on your photo where the sling will be attached when hoisting it out of the water. view full answer...
We don't have a demo video for the Erickson Lift Sling # EM02000 that shows how it works yet, but I can describe to you how it works.
Basically you would hook the bracket with the three hooks to the sides of the PWC under the lip around the edge of it and then using a ceiling hoist winch like the Dutton-Lainson Worm Gear Hand Winch # DL10954 slowly raise the PWC off of the ground. You should note this isn't designed as a permanent storage system for the PWC. view full answer...
I spoke to my contact at Erickson about the Erickson Lift Sling for Personal Watercraft part # EM02000 for your 1995 Kawasaki Sit Down Jet Ski. They didn't quite understand what you meant by a "quick suspended form" but I sent them the same photo you sent me and they said it would work for you no problem. The rubber coated hooks will attach directly under the gray rubber moulding. The hooks will just need to be adjusted so that the weight is distributed evenly. The straps themselves are... view full answer...
The Erickson Watersport Carriers part # EM02000 that you referenced is confirmed to work on PWC's that weigh less than 1,000 lbs.
Without knowing what specific model 2005 Yamaha 3-seater it's hard for me to say yes or no. But, if you look up the weight of your PWC or take it to a scale and weigh it and it's less than 1,000 lbs you should be good to go. view full answer...
The width of the Jif Marine Folding Boat Cleat # JIF62FR is 1-9/16" wide at the widest point in the middle when folded down. The length is 4-1/2". view full answer...
Go To Results