The Classic Accessories Boat Cover, part # 052963889383 is designed to fit tight around the boat but does not fit around the motor.
There are so many motors available it would be tough to make a cover that would fit over the motor and provide a tight fit. We do not offer boat motor covers. view full answer...
I contacted our representative at Classic Accessories and he recommend a Model C Cover, which fits boats 16 feet to 18-1/2 feet long. view full answer...
The Classic Accessories Stellex V-Hull Fishing Boat Cover # CA20144 is designed to fit snuggly on a 12'-14' v-hull boat. The width of the boat should not exceed 68" at the widest point. You want the cover to fit snug so that any wind that hits the boat will not allow the cover to move and possibly chafe, creating wear or damage to the cover.
For the outboard motor I recommend finding a cover that will encase the entire outboard. This will help prevent any critters from building nests... view full answer...
The Classic Accessories Boat Cover # 052963889482 should have no problem being used with an inboard/outboard motor as long as the dimensions of the boat are compatible with the cover.
This cover is designed for V-hull runabouts that are between 17-19 feet in length and a beam width of up to 102 inches.
I attached installation instructions for you to check out also. view full answer...
Yes! The Classic Accessories 9' Pontoon Boat # CA69660 was specifically designed for fishing enthusiast like yourself and has an adjustable motor mount that can be set in 2 different positions. Please note that this does not come with a motor.
The pontoon boat also comes with a fishing rod holder that can be mounted in 6 different positions, and a rear wire platform that is perfect for holding any equipment that you may need. view full answer...
Yes, the Classic Accessories 9' Pontoon Boat # CA69660 includes a 2-position trolling motor mount along with oars and a cargo basket to hold your trolling motor battery, tackle box and beer cooler. It also features an adjustable seat, oar locks and foot rests so you can be comfy while catching your dinner.
The boat consists of three main parts (the two pontoons and the central tubular steel seat frame) so you will be able to easily handle each part separately. In total the boat weighs... view full answer...
For your boat with a 68 inch beam the part Classic Accessories Boat Cover # 052963889185 is going to fit as it can fit beams that are near 75 inches. You will most likely have to remove the trolling motor though. Since they are designed for easy removal that shouldn't be too big of a problem. view full answer...
You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width... view full answer...
I just spoke with my contact at the manufacturer and he said that this Classic Accessories cover, part # 052963889482 will indeed fit your 2004 Hurricane 187.
For an outboard motor cover I attached a page that shows all of the different covers we offer. You will need to know the size and horsepower rating of the motor to select the right cover. view full answer...
The 12 volt accessory circuit of a trailer 7-way connector is commonly used to put a maintenance charge on trailer batteries. There really is no reason you couldn't run the wire up to the battery of your boat instead. If the battery is smaller in size it might actually put a decent charge on it too.
The big thing will be to come up with a way to disconnect the charge wire from the boat before backing it into the water. view full answer...
Either the Classic Accessories Boat Cover by StormPro - 16' to 18.5' (beam width 98") # 052963889383 or the Classic Accessories DryGuard Waterproof Boat Cover - 16' to 18-1/2' - Up to 98" Beam # CA20085 will work for your 2015 Crestliner Raptor.
The differences between the covers is the Storm Pro # 052963889383 comes with the support pole to keep water from pooling and yet doesn't have taped seams, so water can find its way in at the needle holes. The Dry Guard # CA20085 does not come... view full answer...
The Classic Accessories Boat Cover # 052963889284 referenced in your question is designed to fit boats that are between 14 and 16 feet long. Since your boat measures a bit longer than 16 feet, I recommend going up in length with the Classic Accessories # 052963889383. This is the same style cover as what you were looking at but it fits boats that are between 16 and 18-1/2 feet long. This will likely provide a better fit for your boat and can also work with wider boats with a beam width... view full answer...
For a 17 foot boat like your Boston Whaler Montauk that most likely has bow rails the Classic Accessories Boat Cover # 052963889383 would be an excellent option since it can fit boats from 16 to 18-1/2 feet in length.
This would not cover the outboard motor though. view full answer...
The covers like the Classic Accessories Hurricane Fishing Boat Cover # 052963889383 will work on bass boats like yours, but you will need to consider your trolling motor when you install the cover. You would either want to remove the trolling motor before you install the cover or come up with a way to protect the cover from the blades of it.
Some people will use an old deflated basketball to place over the blades of the motor before you install the cover.
From the research I did it looks... view full answer...
I do have an option for you. The Classic Accessories Float Tube part # CA32014 is not motorized. It will allow you to float while fishing and most people use flippers part # CA63227.
The Classic Accessories 9' Pontoon Boat with Padded Seat - The Colorado - Green part # CA69660 does have a motor mount but you would need to add your own trolling motor because it does not come with it. view full answer...
Yes when you connect all of the accessories to the batteries wired in parallel you'd just need to use a standard gauge wire like what you mentioned to make the connections. We offer 10 gauge wire by the foot too with part # 10-1-1 also. view full answer...
Yes you definitely could mount the 2.5-Watt Solar Battery Charger # PTW2997 on your boat to keep the accessories you mentioned's battery topped off. view full answer...
The Tow Ready Vehicle to Vehicle Taillight Converter, # 118158, is typically used on motor homes that are towing another vehicle by way of tow bar.
The converter is not a sealed box so if it were to be submerged in water or exposed to rain, it would be damaged. If you choose to use this part on your boat trailer, you will want to make sure that the converter is mounted in a location that protects it from water. view full answer...
If your Boston Whaler Montauk is 17 feet long the Classic Accessories Boat Cover # 052963889383 is a great option as it's designed for boats like yours that are between 16 and 18-1/2 feet in length. This will work perfectly to cover the bow and side rails on the Montauk but it's not going to cover the outboard motor. This will be the case with any of our boat covers.
This cover features integrated quick release buckles and an adjustable strap system that will allow for an easy and secure... view full answer...
I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk # DL21740 with their 2,500lb capacity per set over the CE Smith # CE27700. With them only having a 1,500lb capacity limit per set I would not feel comfortable using them on your boat.
The majority of the weight will tend to be on the rear of the boat. I would fear the rear set of rollers becoming damaged as they might be very close to their limit by the time you add any other gear or accessories to the boat. view full answer...