We do have a Westin Fey bumper and install kit that fits your 1999 Toyota Tacoma with the part # 66001-93700 but the # 61000 you mentioned does not fit your truck.
If you prefer something that's looks like the original bumper we have the Westin Perfect Match bumper part # 32018 that would work great too. This one is black and we also have chrome # 31018. I attached an install video link for this for you to check out as well. view full answer...
For your 2011 Ford E-250 we have the Westin Fey Diamondstep Rear Bumper which is offered in black part # 20107, silver part # 20105, and chrome part # 21105. These options are all custom fit and they come with all the brackets and hardware needed to install. view full answer...
Yes both of the Westin Bumpers part # 21000-92230 and # 21007-92230 fit your 1997 Ford F-350 and also will work great with the Curt hitch # C14082 that fits your truck as well. view full answer...
I have an option for you, but the Westin Fey Diamondstep Rear Bumper # 73000 will not fit your 1986 Chevrolet K-20 Pickup.
The option I have is the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21000-92230. This bumper is a confirmed fit for your pickup and includes the installation kit you will need.
view full answer...
There are no diamondstep rear bumpers that I can give you which will fit your 2004 Chevy Silverado, as they are universal bumpers for older model trucks and none are designed with your '04 Silverado in mind. What I can do, if you do not want to use a custom-fit bumper, is give you the widths of the universal bumpers so you can see if any match up to the width of the bumper on your truck, but I can't guarantee a fit.
- Westin Fey Diamondstep Rear Bumper # 66000: 61-1/2"
- Westin Fey... view full answer...
The Westin Perfect Match Series Rear Step Bumper # 31016 fits the 2010 Dodge Dakota (excluding if you have the Quad Cab). It does not however fit the 2010 Dodge Ram.
The 2010 Dodge Ram is a full size pick up truck, while the 2010 Dodge Dakota is a mid-size pick up truck. It sounds like you have a 2010 Dodge Dakota and the # 31016 does fit that truck. view full answer...
Yes we have what you need to fit a 2010 Ford E450
The replacement part you are looking for is the Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel
Item # 20107.
It is a custom fit no drilling holes required to install. view full answer...
I have a great alternative bumper that will fit your vehicle. Unfortunately, the Westin Fey Diamondstep Rear Bumper - Chrome # 71000 is not manufactured to fit your 1972 Chevy C-10. However, I confirmed with Westin that the Westin Fey Diamondstep Rear Bumper - Chrome # 21000 will fit your truck. view full answer...
The Westin Fey Diamondstep Rear Bumper # 20107 is designed to fit a 2011 E-150, E-250, E-350, and E450, so it will be the correct part for your van. Just to make sure of this, I double checked with Westin and they confirmed this information. As to the discrepancies with the dimensions, this will still be an aftermarket part and not a direct Ford OEM replacement. It is designed to mimic the factory look but it will be slightly different than what would come stock. view full answer...
You can use the Mounting Hardware for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230 to install a Westin Diamondstep Bumper even with a hitch attached to the rear of the vehicle. If you check out the installation video that's attached to this answer you can see that the bumper is installed with a similar Reese hitch already installed, so you won't have any interference with the two.
With that said, the correct Westin Diamondstep bumper for your 1995 Ford F-150... view full answer...
For your 2011 Ford Van E-350 we have replacement rear bumpers like the part # 20107 but the # 61000 does not fit your vehicle. The correct fit would not interfere with a hitch that is installed. view full answer...
The correct mounting bracket kit for the Westin # 76000 Diamondstep bumper on a 1993 Chevy S-10 is
# 97200. The bumper includes the license plate lamps and has a 3500 lb towing capacity if a trailer ball with a 3/4 inch diameter shank is installed in the mounting hole. For a 1-7/8 ball, use # 19256 or # 19258 for a 2 inch ball. view full answer...
I went to our warehouse and measured one the Westin Bumper, part # 20002-92230, for you. It measures 74 inches end-to-end. This bumper has a silver powder coated finish and comes with the custom brackets and hardware. I have attached a photo of the bumper with the dimension noted you can check out. view full answer...
We do have some Westin bumpers that will fit a 2003 Ford E-350 but I'm not sure how well they will fit with the utility truck configuration (see attached photo of inside of bumper. Also they do have a different design than the one you have in your picture. The Fey Diamondstep bumper comes in 3 different colors:
Silver Powder Coated Steel # 20105
Black Powder Coated Steel # 20107
Chrome Plated Steel # 21105
Please note that these do fall under the Prop 65 warning for California residents. view full answer...
I have a great solution for you. The paint on the Westin Diamondstep Rear Bumper # 61000 is a semi-gloss coat. The brackets are purchased separately for this bumper (as opposed to being welded on for installation). However, my contact at Westin confirmed that # 61000 will not work on your 1987 Chevrolet C/K Series pickup. With that being said, the part you need is the Westin Diamondstep Rear Bumper # 20000 along with the Mounting Kit # 92230.
Is it gloss? Semi-gloss. Part # 20000 with... view full answer...
Yes, the Westin Fey Diamondstep Rear Bumper, # 20002 can be painted. This sturdy steel replacement bumper comes from the manufacturer with a powder coat finish but many customers have successfully painted it for their project. view full answer...
The Westin Fey bumper part # 32012 that you referenced is the correct fit for your 2003 Dodge Dakota and is the correct color scheme as what you have now. It has the black section on top of the bumper and gray on the lower side sections just like your truck! This is an exact match for your truck. view full answer...
We do have bumpers that are a fit for your 2006 Ford E-350, though they are replacement bumpers, as opposed to dock bumpers. These replacement bumpers do have holes for trailer hitch balls like you want, and come with a mounting kit as well. The bumpers come in your choice of three colors, and I confirmed with the manufacturer these are a fit for your 2006 Ford E-350.
- Silver Powder Coated Steel: Westin Fey Diamondstep Rear Bumper # 20105
- Black Powder Coated Steel: Westin Fey Diamondstep... view full answer...
The Westin Diamondstep Replacement Bumper with install kit, part # 20009-92240 does include mounting brackets to replace the OEM brackets. I have confirmed this with Westin.
To see a photo of the actual brackets and hardware included with the bumper, click on the provided link. view full answer...
Actually the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 63000-93800 comes with a license plate light kit and bracket so you would not need to provide that. I attached a picture of what the light kit looks like as well. view full answer...
I have a similar chrome bumper that fits your 1997 Ford F-350 but the # 76001 is not the correct part number. Instead you'd want the Westin Fey SureStep part # 21007-92230 which is a confirmed fit is same style. view full answer...
The # 76001 is not a direct fit for your 1989 Ford Bronco. Instead you will want the Westin Fey Surestep Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21002-95600 which is the same style bumper in the correct fit for your Bronco. We also have the similar Westin Fey Surestep Deluxe XLT Rear Bumper with Custom Installation Kit - Chrome Plated Steel # 21007-95600 which is a similar design also a custom fit. view full answer...
We have a Westin bumper in black that is a fit for your 2008 Ford E-350 with the part # 20107, but the part # 61001 that you referenced does not fit your van. view full answer...
Westin has a Fey bumper and hardware kit that fits your 1979 Ford F-150 with the part # 21000-92230 but the 71000 is not a style of bumper that fits your truck. view full answer...
The # 63000 Westin Diamondstep rear bumper you'd looked at isn't a fit for your truck, but we do offer a Westin replacement bumper for a 2002 Silverado 2500 HD, the Westin Perfect Match Rear Step Bumper in or chrome as part # 31013. The bumper includes the step pads, all the needed installation hardware and the license plate lamps. The bumper has a 5000 lb towing/500 lb tongue weight capacity once a trailer ball is installed in the 1 inch diameter hole. view full answer...
Your 1986 Jeep Comanche is not a confirmed fit for the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel # 63000-97900 most likely due to the frame width. This bumper requires a 45" vehicle frame width for the brackets to attach to. If you do have a 45" frame width you could possibly install this bumper on your Comanche. There is not another bracket kit confirmed to fit your vehicle.
I've attached the installation instructions below to give you... view full answer...
Westin Surestep Replacement Step Bumper, # 66001, requires the Westin Installation Mounting Kit, # 97200, for installation on 1983-2004 Chevy and GMC S-Series pickups, 1982-2005 Ford Ranger pickups (except splash), 1996-2003 Isuzu Hombre and 1994-2005 Mazda pickups.
Your existing bumper brackets may be utilized but the installation kit will still be required. view full answer...
The length of the Westin Fey Diamondstep Rear Bumper # 71000 is 61-1/2" and the depth is right around 7". I confirmed this with my contact at Westin. view full answer...
The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 20009-92230 that you referenced is designed to fit 1988-2000 Chevy and GMC C/K Series Pickup Trucks. Without knowing what vehicle you have it is really hard for me to say if this would work on your vehicle and if it would interfere with your bumper.
I spoke to my contact at Westin he didn't have any notes that said this hitch interfered with factory hitches. view full answer...
The product does not come with mounting brackets. The bumper is intended to be installed on the original bumper brackets without any modification or drilling. The product page for 20002 shows a picture of all of the hardware provided if you position your mouse over the word "Hardware" (in blue). You can also use our Hitch Hunter application at the top of the page to make sure you order the correct bumper for your vehicle. view full answer...
From end to end, the Westin Diamondstep Replacement Step Bumper # 63000 measures 67 inches, as you can see in the photo I edited for you. view full answer...
Unfortunately, without knowing the particular gauge thickness or weight of your 2004 Toyota Tacoma's rear bumper, I am unable to confirm whether the Westin Perfect Match Series # 31018 has the exact same thickness as your OEM bumper. However, I did confirm that the Westin Perfect Match bumper features a 7 gauge steel plate and a 13 gauge face plate for added strength and durability.
To give you an even better approximation, the weight of the Perfect Match bumper is about 50 pounds. view full answer...
We do indeed offer a replacement bumper for your 1992 Mazda B2200 pickup truck, the # 65000-95800 which also includes the mounting brackets and necessary hardware. view full answer...
The Custom Installation Kit for Westin Diamondstep and Surestep Bumpers # 92240 is required for your 1998 Dodge Ram 1500 and is a fit for black # 20009 or silver # 20008. The chrome # 71000 is not a fit according to Westin and only fits up to 1996 models.
If you prefer a chrome bumper the Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31005 is compatible with your truck using that same installation kit # 92240. view full answer...
Per Westin, everything you need for installation is included in the 2011 Ford E150 is the Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel, part # 20107. There is no installation kit needed.
I have included a product description link and video review link below.
view full answer...
I have a solution for you, but after checking with the manufacturer, the Westin Fey Surestep Rear Bumper # 66001 is not a confirmed fit on your 1988 Jeep Comanche. The replacement bumper to use is the Westin Fey Diamondstep Rear Bumper # 63000-97900 which comes with the custom install kit and instructions specifically for the 1988 Comanche. The difference between the two is very negligible aesthetically- one has a raised line tread pattern on the step, whereas the # 63000-97900 has the... view full answer...
The Westin Fey Diamondstep Rear Bumper - Silver Powder Coated Steel # 20002 has a length of 74-1/2 inches. I reached out to my contact at Westin and they don't have the custom mount kit for that vehicle, so you will either need to make one or use the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers # 92230 which may require modifications.
Because it is a universal fit, our fit guide won't help with the specifics of the installation because each installation... view full answer...
The Westin Fey Surestep Rear Bumper - Chrome Plated Steel # 21002 measures 36-1/2 inches between the red lines of the picture you sent.
I have added a link to a video review for you as well of the Westin Fey Surestep Rear Bumper # 21002.
view full answer...
The Westin Bumper part # 21007-92230 that you referenced would be exactly what you would need. This bumper has been confirmed as a fit for your vehicle and would work well. view full answer...
In order to install the Westin Fey Diamondstep Rear Bumper part # 63000 on a 1995 Dodge Dakota you will also need the Custom Installation Kit for Westin Diamondstep Bumpers part # 97800 or you can just use the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit part # 63000-97800.
The bumper mounting brackets are specific to both the frame and bumper which is why you cannot reuse the factory bumper mounting brackets unfortunately. view full answer...
I have an answer for you. Unfortunately, our installation team here at etrailer confirmed that the Westin Fey Surestep Rear Bumper with Custom Installation Kit # 66001-97200 does not have a hole in the bumper that will allow you to access the spare tire hanger on your 1993 Chevy S-10. We unfortunately do not carry any bumper models for your 1993 Chevy 2-10 that have that opening. view full answer...
To get the Bumper and mounting kit for your Dakota you will need to select between the Westin Diamondstep Replacement Bumper with Custom Install Kit, item # 63000-97800, for 1987-1996 Dodge Dakota and the Westin Diamondstep Replacement Bumper with Custom Install Kit, item # 63000-93800, for 1997-2004 Dodge Dakota, depending on the year of your vehicle. These bumpers include the mounting kit for an easy no drill installation.
The Westin Diamondstep Replacement Step Bumper, Black Powder... view full answer...
If you do not have the blocker bar or sub-bumper behind the air dam, the Draw-Tite # 65022 would a good choice for your 2000 F250.
According to the installation instructions, the tow hooks are temporarily removed but are re-installed later in the process.
The Curt front mount receiver, part # 31114 will also work. It is nearly identical and would install in the same manner.
I have provided a photo showing what the receiver would look like once installed.
view full answer...
I do have an option for you but a tow bar cannot be attached directly to the Rampage Mass Articulation Front Recovery Bumper part # RA88509 as the manufacturer stated it is not rated for this application. However, I was able to confirm with my contact at Blue-Ox that the above bumper will work with the Blue Ox Base Plate Kit part # BX1134.
The Rampage bumper will not require you to alter any factory components for installation. There are four bolts holding on each side of the bumper... view full answer...
Westin replacement bumper # 66001-95300 is one option for your 1997 Nissan Pickup truck. It does come with a custom installation kit and license plate lights and wiring. The chrome option is # 76001-95300.
We also have # 66000-95300 and # 76000-95300 as options. All come with installation kits and the lights/wiring. view full answer...
For your 2016 Jeep Wrangler I really like the rugged and durable look of the Rampage Mass Articulation Front Recovery Bumper # RA88509. The bumper features D-rings to let you perform recovery operations, a winch plate for simple winch mounting, and integrated receptacles to let you relocate your factory fog lights if you want to.
None of our aftermarket bumpers including the Rampage Mass Articulation Bumper are designed to be attached directly to a tow bar for flat towing applications,... view full answer...
I have several solutions for you but the bumper part # 66000 is not a confirmed fit for your 1997 Ford F-350. Included is a link to all the confirmed fit options in colors black # 20000-92230, silver # 20002-92230, and chrome # 21000-92230. The correct installation kit is the Installation Kit for Westin Diamondstep, Surestep and Surestep Deluxe Bumpers # 92230 which is included with the bumper kits purchased. view full answer...
The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black Powder Coated Steel part # 20000-92230 measures 74" end to end. It comes with all of the mounting hardware needed to install. It fits the following year make and models:
1973 - 1991 Chevrolet C/K Series Pickup
1973 - 1991 GMC C/K Series Pickup
1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models
1992 - 1996 Ford F-150 Standard Bed models
1984 - 1991 Ford F-150, F-250, F-350 Standard Bed... view full answer...
In order to affix an aftermarket bumper to a vehicle in which a custom bumper is not available for you'll need to measure the length of the bumper and then compare this to the list below for the best fit match.
- Westin Fey Diamondstep Rear Bumper # 65000: 64-1/2"
- Westin Fey Diamondstep Rear Bumper # 63000: 64"
- Westin Fey Diamondstep Rear Bumper # 61000: 61-1/2"
Once you have the best match as far as length goes, you'll need to make up a custom set of brackets or modify the... view full answer...
I checked with Westin and the Westin Fey Diamondstep Rear Bumper will fit a 2008 Ford E-350 Super Duty van. These are universal-fit bumpers and will need to have its brackets welded on.
The Diamondstep Bumper comes in three different colors: Black # 20107, Silver # 20105 and Chrome # 21105. view full answer...
The mounting holes on the top of the Bulldog Winch bumper part # BDW21000 are spaced so that most standard winch mounts are going to fit. Nearly all winch mounts are made with similar dimensions to make this easier. view full answer...
In order to install the Westin Fey Diamondstep Rear Bumper part # 61000 on a 1994 Toyota Pickup you'll need the Custom Installation Kit for Westin Diamondstep and Surestep Bumpers part # 93500. view full answer...
We do have a fit for a step bumper for your 2012 Ford van, though it is a different part number than you mentioned.
What you will need is the Westin Fey Diamondstep Rear Bumper # 20107.
A separate mounting kit isn't needed for this bumper because the brackets are already welded on which will allow you to mount it to the frame of your van. I have added a link below to a video review for you to check out as well. view full answer...
The Westin Fey Diamondstep Rear Bumper # 20009 that you referenced does come with license plate lights that pop into the bumper. Bulbs are included as well. view full answer...
There are a few different chrome bumper options for the 1995 Ford F-150, see link. These are all universal fit bumpers. A Perfect Match (custom fit) is not available for the 1995 model year. view full answer...
The Westin Fey SureStep Bumper # 21002-92230 is a fit for your 1992 F-150 with standard bed and the same is true for the Surestep Deluxe XLT Rear Bumper # 21007-92230. The only difference between these two bumpers is that the step-pad surface on # 21007-92230 extends down over the lip of the chromed surface.
I confirmed with my technical contact at Westin that both of these will fit your F-150. Both come complete with the required custom installation kit and install without drilling. view full answer...
The Westin Fey Surestep Rear Bumper - Black Powder Coated Steel # 61001 is rated to haul up to 3,500 lbs and will need a hitch ball with a 3/4 inch shank. I recommend # 19258 for a 2 inch ball or # C40001 for a 1-7/8 inch ball. The bumper has integrated holes for the safety chains on either side of the hitch ball. These holes will allow for the S-hooks of your safety chains like # 2118-348-04 to connect quickly and easily but are not compatible with clevis hooks. I've attached an image... view full answer...
The Westin Fey Surestep Deluxe XLT Rear Bumper part # 21007-95600 is indeed a fit for a 1988 Ford Bronco (All Models Including Eddie Bauer Edition). The bumper is a custom fit which means it comes with a set of brackets specifically for a Ford Bronco so you can bolt the new bumper on without modifications.
I spoke with Westin for you and they weren't able to give the exact dimensions of the product, just the package dimensions of 77" long x 9" wide x 9" tall. It is however a confirmed fit. view full answer...
Is it a bumper like the Bulldog Stubby Front Bumper # BDW21000? After installing the bumper you will just need the right components to flat tow the Jeep using the bumper. You will need brackets # BX88357 and a compatible tow bar. I recommend the Alpha, # BX7380, since it is rated for 6,500 pounds and comes with safety cables.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring... view full answer...
I have a solution for you, but since there is no bracket kit available for your 2003 F-350 the Westin Fey Diamondstep Rear Bumper # 66000 is going to require quite a bit of fabrication in order to work on your vehicle. For that reason, I recommend going with the Westin Fey Perfect Match # 31003 which is made of chrome plated steel and designed to fit on your 2003 F-350 SuperDuty. This is an easy install, since it will bolt into the existing OEM bolt holes. Also something to note, since... view full answer...
The item you selected, Westin Diamondstep Replacement Bumper, part # 66000-93700, will fit your 1998 Toyota Tacoma SR5 2-wheel drive.
I have linked the page showing all the bumpers that will fit your 1998 Toyota Tacoma SR5 truck. view full answer...
Yes, I believe the rear bumper you are referring to is the Westin Fey Surestep Rear Bumper part # 21002. In order to install this bumper on your 2003 Dodge Van you will want to use the Installation Kit for Westin Surestep Bumpers part # 92230. This kit will be a direct match for the bumper but will require modifications in order to mount on the vehicle. view full answer...
The replacement bumper I recommend for your 2017 Wrangler Unlimited is the Bulldog Winch Front Bumper for Jeep # BDW21022. This bumper will replace your factory bumper and will not interfere with the base plate installation.
The Blue Ox base plates I recommend are part # BX1126. As you can see in the attached installation video, the base plates are installed below the bumper.
If you are looking for a winch for the front of your Jeep I recommend a winch like part # BDW10044. This... view full answer...
Like you said, one of the wires for each light on the bumper is for actual power to the lights. Tap into a running light circuit wire at the tail lights if there isn't already a power wire present from the old bumper.
The other wires are ground wires and you will need to attach them to clean bare metal surfaces. view full answer...
The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better illustrate how they are different.
Bumper # 21007-92230 will fit your 1971 Ford F-100 though you may find that the styling of bumper # 21002-92230 is a better match while # 21000-92230 is more traditional for trucks of that era. view full answer...
I spoke with my contact at Westin regarding the correct replacement rear bumper for your 1979 Toyota Pickup. Westin only lists fits back to the 1980 model, so they cannot confirm a fit. For the 1980 Toyota Pickup, Westin lists the # 61000-94400 Diamondstep Rear Bumper/Mounting kit. The # 66000 bumper is a fit for a later 1995-1999 Toyota Tacoma.
Both the 1979 and 1980 Toyota pickup were of the 3rd generation, so a bumper that fits the 1980 model is a likely fit for the 1979 model since... view full answer...
Yes! We have numerous replacement bumper options for your 2017 Jeep Wrangler 2-door. I have included a link to them for you. For the rear bumper I recommend the Rampage recovery bumper # RA88606. It has a rugged textured finish and swing out spare tire carrier.
For a matching front bumper I recommend # RA88510. It features the same rugged finish so they bumpers will match. view full answer...
The Westin Diamondstep Replacement Bumper you referenced, part # 66000 includes the bumper only, not the install kit. The bumper plus the install kit is part # 66000-97200.
The bumper is NOT compatible with Ranger Splash Models or vehicles equipped with the OEM hitch.
The install kit includes the mounting brackets and all necessary hardware to attach the brackets to the truck and the bumper to the brackets. If the rear of the truck frame members are still in good shape (not rusted... view full answer...
For th`e Westin bumper # 63000 and your 1991 Dodge Dakota you would need custom installation kit # 97800. It includes the brackets and the mounting hardware. view full answer...
I spoke with my contact at Westin and he said that for the Diamondstep Replacement Bumper, # 63000-93800, you would need Westin Perfect Match Replacement Bumper License Plate Light Kit, # 00007153. The kit includes everything need for installation. view full answer...
The Bestop HighRock bumper # B4491001 is not designed to be used to flat tow the vehicle. There are some aftermarket bumpers that do have this ability but we do not carry them. For example if you had a Smittybilt XRC Atlas bumper you could use a Blue Ox adapter # BX88357 to connect a tow bar.
The most popular compatible tow bar is the Alpha, # BX7380. It is rated for 6,500 pounds and comes with safety cables. For lighting I recommend the bulb and socket kit # RM-155. Check your owners... view full answer...
We do have a couple of different options for bumpers that fit your 1997 Nissan pickup, both of which are from Westin and both of which come with mounting brackets. They are also available in your choice of either chrome or black.
- Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Black # 66000-95300 or Chrome # 76000-95300
- Westin Fey Surestep Rear Bumper with Custom Installation Kit - Black # 66001-95300 or Chrome # 76001-95300
These are very similar step bumpers... view full answer...
The weight of the # 21000-92230 is 72 lbs. The Westin Fey Diamondstep Rear Bumper # 20000-92230 that you referenced weighs 72 lbs also. It costs more due to the chrome finish. view full answer...
Looks like you have an older version of the 21007-92230 that you referenced which fits the following:
1973 - 1991 Chevrolet C/K Series Pickup
1973 - 1991 GMC C/K Series Pickup
1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models
1992 - 1996 Ford F-150 Standard Bed models
1984 - 1991 Ford F-150, F-250, F-350 Standard Bed models
1992 - 1996 Ford F-250 and F-350 Standard Bed models
1997 - 1997 Ford F-250 and F-350 Heavy Duty Standard Bed models
1972 - 1980 Dodge Full Size... view full answer...
For your Dodge Dakota with a quad cab you have two options as long as your truck is an R/T, SLT or base model. You will need the Westin Perfect Match series chrome bumper, part # 31012.
The Fey series like part # 63000-93800 that you referenced won't fit the quad cab models. My contact at Westin said that the Diamond step bumpers, which are the more universal ones, will not fit the Quad Cab because they come with separate brackets to mount the bumper that are not compatible with the Quad cab. view full answer...
I can confirm that the Westin Fey Diamondstep Rear Bumper # 20107 is a fit on your 2006 Ford E-250 cargo van and comes with mounting hardware included. I've also linked the other options, which are fairly similar but available in some different colors if you're interested. view full answer...
The Westin # 66000 is not a fit for your 2004 Chevy Silverado 1500, however we do have a bumper that is confirmed to fit your truck. It is the Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31006. view full answer...
For your 2001 Dodge Dakota SLT we have a couple of replacement rear bumper options. You can use a Perfect Match bumper, chrome-plated steel, # 31012. This bumpers will install using the factory bumper brackets.
The more universal fit bumpers, such as # 63000-93800, will not fit quad cab models. view full answer...
We certainly do ship to Hawaii!
For a Westin Fey Surestep Rear Bumper with installation kit for your 1990 Toyota pickup, you'd want to use # 61000-93500. The # 76001 bumper you'd looked at is a fit for the Nissan Hardbody Pickup, and would't work for your Toyota. view full answer...
The Westin Fey Surestep Rear Bumper, # 21002-92230, is chrome-plated steel. I included the picture showing the chrome a little better. The top has a step pad on it. The rest of the bumper is so shiny it is reflecting the white room the picture was taken in. view full answer...
I tried to track down the dimensions for the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 61000-94400 that you referenced, but we do not have one in stock and Westin does not have dimensions available. However, he did assure me that this setup has been confirmed to fit your 1985 Toyota Pickup so it should work very well as a replacement bumper for you. view full answer...
Westin Perfect Match Series Rear Step Bumper # 31006 fits 2001 Chevy Silverado 1500 light duty and 2500 light duty models so if your 1500 is a light duty (anything other than a 1500HD) then this bumper is an excellent option.
If you have an HD model then you would instead need # 31013.
The Westin Perfect Match bumpers are indeed high quality replacements that are custom fit for the vehicles for which they are designed. view full answer...
We have a similar rear bumper that does fit your 1995 GMC 2500 with the part # 31000 but the # 76001 you referenced does not fit. To see all the options that fit your truck check out the link I attached on this page. view full answer...
In order to use the Westin Fey Surestep Rear Bumper part # 61001 on your 2001 Toyota Tundra you would need to either make your own or have someone else make a set of custom brackets for you as Westin does not offer a set for your Tundra. I wish I had a better option for you. view full answer...
The correct Westin Fey Diamondstep Rear Bumper for a 1998 Dodge Ram 1500 is part # 20009-92240 which comes with the Custom Installation Kit for Westin Diamondstep and Surestep Bumpers part # 92240. view full answer...
The correct replacement license plate light kit for your Westin Fey Surestep Rear Bumper part # 66001 is the Replacement License Plate Light Kit part # 00007153. This is the exact same kit that would have came with the bumper so there will be no compatibility issues. The lamp covers are chrome but you can always paint them black to match the bumper if your like.
I have attached a review video which shows everything that is included in the kit for you as well. view full answer...
The hitch part # E-3S that you referenced would not bolt up the bottom of the Westin Bumper part # 66000-97200 without a lot of modification that I can't recommend.
Instead I have a much better option for you for a hitch for your 1996 Ford Ranger. You would want the Curt hitch part # C12012 that will attach directly to the frame of your truck and would be a much better hitch setup.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes... view full answer...
If you are looking for a rear bumper for your 2003 Toyota Tacoma then I recommend taking a look at the Westin Perfect Match Series Rear Step Bumper part # 31018 for chrome or part # 32018 for black. This bumper is specially designed for your Tacoma and mimics the factory look. It has an integrated hole for a hitch ball and it comes with all of the brackets and hardware needed for installation. There is no drilling required.
I have attached a photo of what each bumper will look like once... view full answer...
The 2002 F-250 has two different styles of front end configurations. If your front end has the blocker beam behind the front bumper and the leaf springs mounted on the inside of the frame rails then you would use the Curt Front Mount Trailer Hitch Receiver, item # C31014, which will allow you to retain your factory fog lights.
If your truck does not have a blocker beam installed and the springs are mounted underneath the frame, from the factory then you could use the Draw-Tite Front... view full answer...
The Westin Diamondstep Replacement Step Bumper, item # 66000, does not come with installation hardware and is designed to be installed with the Westin Installation Mounting Kit for Diamondstep and Surestep Replacement Bumper, item # 95300. Lights and wiring can be purchased separately, the Westin Diamondstep, Surestep and Surestep Deluxe XLT Bumpers License Plate Light Kit, item # 00007153, is the correct kit for this bumper.
The Westin Diamondstep Replacement Bumper with Custom Install... view full answer...
Go To Results