Yes. The Tire Grip Vehicle Traction Recovery Track for Snow, Mud, and Sand # 288-07411 aren't necessarily intended to be used in this manner, but we have had a customer report back that they've used them for this application successfully.
They do come as a single track with part # 288-07411, or as a set with part # 288-07411-2.
view full answer...
I went out to the warehouse and took measurements of the Custer Reflective Slow Moving Vehicle Sign - Adhesive Sticker Item # EMB20A for you. I have included a picture showing the measurements. view full answer...
The Buyers Products LED Safety Flares w/ Charging Case # 3378891018 use a lithium-ion battery. Based on this information, you can expect it to lose approximately 3% capacity per month if they are sitting unused. Once charged, the amount of time they can be used varies based on the flash pattern. The following are the different patterns and their run times:
Solid-On High: 8 Hours
Rotate: 15 Hours
Alternate: 10 Hours
Quad-Blink: 15 Hours
Double-Blink: 30 Hours
Fast-Blink: 12 Hours
Slow-Blink:... view full answer...
Absolutely the Tire Grip Vehicle Traction Recovery Track # 288-07411 can be used for extra traction on a boat ramp. They can be used virtually on any surface to help improve traction. We even had a customer write a review saying that's what they use it for. Having that extra security is really nice, and when you don't need them you can store them in the back by your spare tire.
They do come as a single piece # 288-07411, and as a set # 288-07411-2
I linked a review video for you... view full answer...
I attached a picture that shows how the cable attaches to the slats. As well as a picture that shows the thickness of the slats being 18.67 mm. This is the only width we have available currently and hopefully soon we have a demo video but at this time we do not. view full answer...
I was able to reach out to Buyers Products and obtain a copy of the instructions that should have been included with your Buyers Products Safety Flare - 9 Light Patterns # 3378891016. I have linked a copy of the instructions to this answer. view full answer...
The PT Power LED Safety Flare w/ 5 Light Patterns - Magnet Mount - 15 Diodes - Qty 1 # PTW2368 is weather resistant, but not waterproof. It is designed to function in rain and snow, but it is not made to be submerged in water. It is compatible with marine use, but you will want to position in where it will not be submerged. view full answer...
The top of the Taylor Made Eco Blast Rechargeable Air Horn - Chemical Free - US Coast Guard Compliant, part # 369616, is not designed to unscrew. The unit gets recharged at the bottom of the horn.
I have included a product description link and a video review link below. view full answer...
The Tire Grip Vehicle Traction Recovery Track for Snow, Mud, and Sand # 288-07411 actually doesn't have a weight rating so it will work great for a heavy duty truck like your F-550 with the service bed. view full answer...
Yes the Tire Grip Vehicle Traction Recovery Track part # 288-07411 would be a very viable option for gaining extra traction on the slippery gravel boat ramps. Here in the Midwest we have a lot of river launch ramps that have the same gravel situation and I could see these being very helpful in those situations. view full answer...
I spoke with Performance Tool and they let me know that the battery compartment on the PT Power LED Safety Flare w/ 5 Light Patterns - Magnet Mount # PTW2368 is held in by those two screws that you already removed. They go on to mention that the lid is going to be a pretty tight fit to keep the moisture and dust out, however the lid should lift out once pressure is applied to the tab on the side.
Attached is an image that shows a pen pointing toward the tab. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks part # 288-07411-2 can be used on pretty much any surface to help improve traction so I see no reason as to why you cannot use them on a cement boat ramp with slippery algae. view full answer...
Since the Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand # 288-07411-2 are designed to help with drive wheels, I recommend using the traction grips on all four of your all-wheel drive Audi A6. This will help give you the traction you need on all tires to get you out of the snow, mud, or sand. I went ahead and attached a demonstration video that shows how they work.
Another way of preventing these mishaps is to use tire chains. For that route, if you are interested... view full answer...
As long as you slowly ease into the throttle and do not slam it, the weight of your 1-ton truck will sustain the shape of the Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand # 288-07411. We have had neighbors successfully use the Tire Grips on larger trucks. Since the Tire Grips are designed for each drive wheel, I recommend purchasing a pair for each drive wheel on your truck for maximum traction. view full answer...
The Stallion Tire Grip recovery track, part # 288-07411-2 does feature metal studs on the underside that will help the mat grip the ground surface. You can get a better look at the mat by checking out the video I've linked for you.
view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 weigh about 6-1/2-lbs each, so they're easy to move around and get situated when you need to use them. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand # 288-07411-2 you were looking at does not have a maximum weight rating, and as such would be a great option to use with your Class A Motorcoach. view full answer...
I spoke to my contact at Erickson and she told me the Erickson Emergency Warning Triangle w/ Reflectors and LED Lights - 15-3/4" Tall - Qty 1 # EM05313 is made for outdoor emergency use. It was designed to withstand the elements for the emergency period of time. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks # 288-07411-2 you referenced come with a 1-year limited warranty. I have attached a review video for you to check out. view full answer...
While we haven't directly had experience with the Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand # 288-07411-2 in sand we have had a handful of customers come back and tell us that these worked great for them in deep sand and that they saved them from having to call a tow truck. view full answer...
As long as you place the studs down toward the ground on the Tire Grip Vehicle Traction Recovery Tracks # 288-07411-2 they will not damage the tires on your Jeep. You will want to position the tracks as centered as possible on your Jeep tires to get the maximum amount of traction since your tires are wider than the mats. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks part # 288-07411-2 are only offered in one length, 33-1/2". If you need something with a longer length you could just simply combine multiple sets of tracks. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 aren't rated for weight capacity and torque. They are simply used to help with traction in a recovery situations. It will work well for your Renegade Verona Le. view full answer...
The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 is designed for traction with a slow moving tire that is already stuck. If you aren't already stuck then snow chains are the route to go with a top speed of 25 mph in most cases.
For the emergency situation like you are describing you could use more traction platforms or you may be interested in the Tire Grip Vehicle Traction Recovery Track for Snow, Mud, and Sand - Qty 1 # 288-07411.
If... view full answer...
Yes, the Hopkins GripTrax Traction Plates # HM12501 will work on a sandy beach as well as on muddy and snowy surfaces. Since a sandy beach surface may not always be firmly packed you might consider using two sets so that you have enough length to get the van onto firmer packed sand. Laying down two plates end to end will give you over 4-feet of traction surface so that the van can get enough momentum to roll to a harder surface. view full answer...
The Tire Grip traction plate # 288-07411 was designed to be used at the time of getting stuck so you wouldn't want to keep the RV parked on it. I do have an option that you can stay parked on and can also help with leveling if need be. Take a look at the 10 pack of leveling blocks # CAM44521. Several of these on the ground will provide a solid platform and they can be stacked to help with leveling. I have included a link to a video review for you. view full answer...
So the Custer Reflective Slow Moving Sign # EMB20GM attaches to the Custer Slow Moving Vehicle Mount Kit Spade
Item # EMB-HDW-SPD which then slides into the # EMB-HDW-SKT that you referenced. And the bracket attaches to the tractor with the included carriage bolts. view full answer...
There is nothing unsafe about having your kayaks sticking out a little bit when they are loaded. If it were to stick out a little further you may have to put a red flag on the end of it but for two feet, you're fine! If you wanted to be extra safe, you can grab this safety flag # EM05302 and attach it to the end of your kayaks! view full answer...
The Tire Grip Vehicle Traction Recovery Track # 288-07411 is designed to be used in sand. It is a very durable rubber which is not going to crack under the weight of your GMC Denali and the rubber grips are held together by galvanized steel cables. There isn't a specific number you need because it can depend on the situation you find yourself in although a single mat is likely going to be sufficient for most situations.
I've added a link to a video review of this product for you to take... view full answer...
I spoke to my contact at Hopkins who informed me that the Hopkins GripTrax Traction Plates part # HM12501 are around 3/4" thick. These pads are a great tool to keep in your car as they will work in snow, mud and sand. They are also lightweight and do not take up too much space.
I have attached a review video for you as well. view full answer...
The Orion Campfire Starter Mini Flares # RN753-01 are not recommended by the manufacturer for indoor use. There is a label on the top of the box that states they are for outdoor use only. The flare can also be used for an emergency flare and has a burning time of 5 minutes.
As an alternative, I recommend using the Fire Starter Sticks # CG85FR which can be used indoors view full answer...
Yes, we do have the Orion Emergency 30-Minute Road Flares # RN3073-01 sold in a 3-pack. These will replace the flares in the Kit # RN6030-01.
You might consider switching to the LED Road Flares # SA54FR. This kit includes 3 lights which you can attach to your vehicle with the built in magnets. These lights have a run time between 3 and 41.5 hours depending on what mode you have the lights set. Each light requires 3 AAA Batteries and we have the Duracell Optimum # DU26QR available in... view full answer...
The bearing, race, and grease seal information can be easily be found by removing any wheel from your trailer and taking down the part numbers from the inner and outer bearings to determine the correct replacement parts for your spindles.
I've shown this in the attached image so you can get a better visualization.
From here you should be able to find the corresponding replacement parts needed. Additionally, to get your lug and bolt pattern information you are going to want to measure... view full answer...
I spoke with my contact at Hopkins about the GripTrax traction plates, # HM12501. He stated that they measure 25 inches long and 8 inches wide. They are made of ABS plastic. The plates are rigid, they are not meant to flex.
I have included a picture that shows the dimensions for you. view full answer...
Go To Results