We do offer a variety of hitch covers that will work on 1-1/4 inch hitches. We have plain covers like the Chrome cover, part # 5351, or if you prefer a cover with some color you may want to check out something like the HitchMate Flying Geese Trailer Hitch Receiver Cover, part # HE4207.
I have attached a link to our product page that has the hitch covers we offer that fit 1-1/4 inch receivers. Some of the covers do fit a 2 inch receiver as well. view full answer...
The Dallas Cowboys Helmet Hitch Cover, item # HHCC2008, measurement from the top of the shank to the top of the cover is 15/16 inches, see photo at right.
I went out to the warehouse and pulled each of the Dallas Cowboys hitch covers, see link, and measured them. The hitch cover with the shortest dimension from the top of the 2 inch hitch receiver opening to the top of the cover is the Dallas Cowboys Star Hitch Cover, item # NHC108. The measurement from the top of the shank to the top... view full answer...
Most of the hitch plugs and hitch covers are designed that the plug or the shank on the hitch cover will slide into the inside of the hitch receiver. The lip on the end of the hitch should not interfere with installing the correct 1-1/4 inch size hitch cover on your 2007 Ford Explorer.
The rubber hitch plugs, like the Draw-Tite Rubber 1-1/4 Inch Tube Cover, # 2211, will just push into the opening and does not require a pin to hold it in place.
The hitch covers that use a shank like the... view full answer...
We have oodles of hitch covers. If you are looking for something specific, I have included a link to our hitch cover main page. There you will find all of the categories for hitch covers in different sizes and materials. We do have some Nissan logo covers but none that say Pathfinder.
Take a look at the black and chrome cover # CR-690 that fits 1-1/4 or 2 inch trailer hitches. For trailer hitch covers like these, I recommend getting a looking hitch pin to deter theft of the cover.
For... view full answer...
For a fifth-wheel hitch cover to fit your Reese 18K 5th Wheel hitch, I would recommend the Classic Accessories 5th Wheel Trailer Hitch cover, part # CA80116, which is Black. We test fit this cover on an Elite hitch and it covered the head perfectly but there was a portion of the legs it did not cover.
The Reese 5th Wheel Trailer Hitch Cover, part # RP30055 , is not designed for the Elite Series hitches. view full answer...
Yes, we do have storage cover options for fifth wheel hitches. They are universal in fit but you should still check the dimensions before ordering. For a head only cover I recommend the Reese 5th Wheel Trailer Hitch Cover part # RP30055 or for a full body cover I recommend the Classic Accessories Cover for 5th Wheel Trailer Hitch part # CA80116. These are both great options to help keep the hitch protected from the elements when not in use.
Please note, the body cover is for fixed hitches... view full answer...
The best 5th wheel hitch cover that we have for your Husky 16K-S Silver Series 5th wheel hitch with 16k roller is the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116. This cover is 24" x 24" x 18" and covers more of the hitch and roller than the other options.
While the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116 will not completely cover both the 5th wheel hitch and the roller, it will cover the most important areas of the hitch and roller assembly. view full answer...
The gooseneck hitch cover part # RP30136 that you referenced is designed as a cover for Reese Elite hitches like the part # RP30138-26. I attached a picture of what the cover will look like when installed. You can see that it fits within the outer ring of the gooseneck hitch. If you have the factory fifth wheel hitch installed in your 2012 Ford F-350 this cover will work well for you. view full answer...
I have included a link to all of the firefighter hitch covers that are available for a 2" hitch receiver as well as a link to our light-up hitch covers.
The Fire Department Trailer Hitch Cover, # AUT-FIRE-C, that you referenced features a raised emblem to create a 3D effect but this is not a light-up hitch cover.
At this time we do not have a light-up, firefighter hitch cover. view full answer...
Your B&W # BWRVK3270 5th-Wheel hitch has a footprint measuring, 31-3/4" wide x 33-1/2" deep. You could use the Reese # RP30055 hitch cover that only covers the head of the hitch, or the Classic Accessories # CA80116 hitch cover that measures 24" x 24" x 18" which would cover most of your hitch.
Unfortunately, there is not a cover custom made for the B&W hitch. view full answer...
The Ford Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black # AUT-FOR-RB that you mentioned is actually made of stainless steel all around, including the front. You can also get this in a silver version with the highlighted Ford logo: Ford Trailer Hitch Cover - 2" Hitches - Stainless Steel - Brushed # AUT-FOR-S.
A few other variations of stainless steel Ford hitch covers are the Ford F-250 Trailer Hitch Cover - 2" Hitches - Stainless Steel - Brushed # AUT-F252-S and Ford... view full answer...
Yes, the Chicago Bulls NBA Hitch Cover # OHCC2203 includes a plastic clip to hold the cover in the 2-inch hitch. The clip sides engage with the hitch pin hole in the receiver tube to prevent the cover from dropping out but it is not a lock. A lock such as # e98880 will make it impossible for a thief to remove the cover. view full answer...
Yes, Your hitch lock should work just fine with the # OHCC2119 New York Yankees Trailer Hitch Receiver Cover. The hitch cover fits inside the receiver and the hitch locks through pin will engage the hole in the cover to secure it to the hitch. view full answer...
We carry a large selection of hitch covers that will fit your 2016 Cadillac SRX's hitch. Our covers can fit 1-1/4, 2, and 2-1/2 inch trailer hitch receiver openings. Just measure the you trailer hitch opening to find the correct fit.
I have attached a link that will display every hitch cover that we carry on our site. We carry everything from a standard rubber hitch covers like # 22282 for 2 inch hitches and # 22281 for 1-1/4 inch hitches to novelty and branded covers.
Now, if you are... view full answer...
The State of Texas Hitch Cover you mentioned, part # AMGSTTXC would be secured in the receiver using a standard hitch pin and retaining clip like # PC3 or a locking hitch pin like # e98882. Although some of the hitch covers we offer use the wire arrangement you describe, this particular cover uses a piece of square tubing attached to the rear of the cover as shown in the photo I provided.
Because hitch covers are frequently stolen, I would recommend going with the locking model. view full answer...
I have not heard anything along the lines of a custom cover for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270 being manufactured. Currently the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116 is the best cover for the B&W Patriot. It will not cover both the hitch head and slider assembly, but it does cover the entire hitch head itself. I have included a picture showing what all this cover will cover on a B&W Patriot Sliding hitch. view full answer...
I have the perfect hitch cover for you!
- Bass Emblem 2" Trailer Hitch Receiver Cover # AMG102370
This hitch cover is made in the USA and has a chrome plated Bass fish on a black background that really makes the Bass pop.
Since your hitch cover will be the envy of everyone else on the lake, I suggest picking up the etrailer Hitch Receiver Lock # e98881 to lock the cover in your hitch. view full answer...
I do have a VFW hitch cover for you like the VFW Seal Trailer Hitch Receiver Cover part # AMG102422 but the emblem does not come separate from the cover. This is the only VFW branded logo we offer. You can protect the hitch cover from theft by using the Trailer Hitch Receiver Lock part # e98880. view full answer...
The best cover option we have for a B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter part # BWRVK3400 is the Classic Accessories Cover for 5th Wheel Trailer Hitch part # CA80116. This is a universal cover so it won't completely fit around the hitch but, it will cover all the main components like the head and center section. The hitch head is really the only thing you need to cover. The base and rails would then likely still be left exposed because the cover is not large... view full answer...
While we unfortunately do not carry the Star Wars Rebel Alliance cover for 1-1/4" hitches, we do offer some other Star Wars covers that will fit:
- Star Wars Stormtrooper Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002280R01
- Star Wars Darth Vader Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002282R01
- Star Wars Empire Symbol Trailer Hitch Cover - 1-1/4" and 2" Hitches # PC002281R01 view full answer...
Go To Results