There is a lock that will work for your Sidewinder, but the collar on the Blaylock EZ Lock King Pin Lock # BLTL-70, though the Blaylock's collar is going to interfere due to the design; if you take a look at the accompanying photo you can see how close the wedge and king pin are.
Instead, I recommend the Master Lock 5th Wheel Trailer King Pin Lock # e98896.
The reason why is the # e98896 will fit around the king pin and not interfere with the wedge on a Sidewinder. view full answer...
There are king pin locks, yes, and the best option for the most protection is one from Master Lock:
- MasterLock High Security King Pin Lock # ML387
The # ML387 won't shear from bolt cutters and totally encompasses your king pin for complete security. Put this on your king pin and your 5th wheel trailer is absolutely going to stay put. view full answer...
The Master Lock # 2999DAT king pin lock you referenced will work just fine on the king pin of your Reese Sidewinder. The Sidewinder uses a standard king pin, and the wedge will be far enough rearward of the king pin that it won't interfere with installing the lock. view full answer...
Yes, the Reese Revolution pin boxes are compatible with the Master Lock 5th Wheel Trailer King Pin Lock # 2999DAT. The Revolutions use standard size king pins like what this is designed to be used with. view full answer...
I do have both pin locks you're looking for but we don't offer one keyed alike for both. Instead, I recommend using the InfiniteRule Hitch Lock for 3" Hitches part # 34061074-D for the trailer hitch and then the AMPLock King Pin Lock for 5th Wheel Trailers part # AMP77FR for the king pin.
I have attached a video I did on the king pin lock below. view full answer...
Yes, the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes # AMP87FR will work with your Turning Point pin box. It has a cutout to accommodate your wedge as well so that you don't have to remove it to lock up the king pin. view full answer...
Ultra-Fab 5th Wheel King Pin Lock # UF48-979008 is designed to fit the industry standard 5th wheel king pin size so I have no doubt that it will fit your trailer. I have included a link to a video review for you. view full answer...
The etrailer 5th Wheel King Pin Lock # e49PR has a 2-1/8" span to fit standard 5th wheel trailer king pins, which will typically be 2" in diameter. This would clamp to the smaller portion of the king pin where the 5th wheel trailer hitch jaws would typically sit. view full answer...
The Ultra-Fab 5th Wheel King Pin Lock # UF48-979008 might be just what you're looking for. It has a 3-1/4" diameter and uses a padlock to secure the king pin. If you could provide a picture and some dimensions on your king pin I'd be happy to take another look and see if there's something a bit more specific for your setup. view full answer...
The Ultimate Andersen 5th Wheel Hitch is a great product, and it makes sense that you'd want to protect your investment. If you're desiring a tripod with a locking feature around the king pin, the product # UF19-950500 is the one I'd recommend. You're going to need to remove the Andersen coupler block from the king pin to use this product, as there is no lock or locking tripod that is made to work with the coupler block. If you're interested in a king pin lock that works without the tripod,... view full answer...
Based on my research, the Masterlock High Security King Pin Lock, part # ML387, will work for your trailer. As long as the king pin on your 2015 Keystone Alpine 3010RE is a standard 2 inch diameter king pin, the # ML387 will work well for you.
I have attached a review video of this lock for you. view full answer...
The etrailer.com 5th Wheel Trailer King Pin Lock, part # e98896, is a collar that is designed to lock around the king pin of your fifth wheel trailer. It is to prevent somebody from hooking up to your fifth wheel trailer. view full answer...
The Trimax King Pin Lock # TMX56RR can still be used with your 5th wheel having a capture plate from PullRite. The capture plate mounts to the top of the kingpin and only takes up a similar amount of space that a Lube Plate # RP83002 would. If you happen to have one of the few capture plates which also has a funnel type block welded near the king pin you would want to consider a lock like the etrailer # e98896 as it does not have the section which slides over the top of the king pin channel. view full answer...
The best option we have for a king pin lock that will work on a pin box with a capture plate/wedge installed is the AMPLock King Pin Lock for PullRite and Sidewinder 5th Wheel Pin Boxes part # AMP87FR. I have attached a video I did below. view full answer...
The Ultra Fab King Pin Lock is universal, so it will work with any kingpin. We actually went out to the warehouse to test if the wedge would interfere with the lock. We confirmed that part # UF48-979008 work great with a wedge installed, no interference.
If you would be interested in viewing a product demonstration of the King Pin Lock, click on the provided link. view full answer...
We can offer you several choices in a 5th wheel king pin lock that can be ordered in multiples that are all keyed alike but Master Lock King Pin Lock # ML387 is not among them.
We offer our aluminum King Pin Lock # e98896. It can be ordered in any quantity you need with all locks keyed to the same key. Just select the keyed alike option from the drop-down menu tool and then select your quantity. There is a modest charge for this service. view full answer...
The AMPLock King Pin Lock for 5th Wheel Trailers # AMP77FR you mention is for deterring theft, while the Demco Autoslide Locking Plate for MOR/ryde Pin Boxes # DM6025 is designed to prevent your king pin from pivoting inside your hitch.
The two would not be used interchangeably and are meant to be used separately. So when you're towing you'd use # DM6025, and when you get to your campsite and unhitch you'd use # AMP77FR to protect your king pin.
You could also use a smaller lock like... view full answer...
The Buyers Products 2" King Pin Lock # 337KPL200 is made overseas per my contact at Buyers Products.
For a king pin lock that's made right here in the US I recommend checking out the Blaylock EZ Lock King Pin Lock for 5th Wheel Trailers # BLTL-70-40D. This has a nice aluminum construction so it's going to resist the elements plus you can use the included Master Lock padlock for some of the other various Blaylock applications as well. view full answer...
The etrailer.com 5th Wheel Trailer King Pin Lock comes with keys that are specific to each individual king pin lock, so you don't have to worry about someone using his King Pin lock key to open yours.
I have linked you to a product demonstration video for the # e98896 that you might find helpful. view full answer...
I spoke with my contact at B and W and while they do not have a specific locking pin for the head on the Companion hitch # BWRVK3600 we can help. You could replace one of the pins with Kuat lock # HL1. It is a 5/16 inch diameter so it would fit loose in the 3/8 hole. The span of the pin is 3-1/2 inches.
Then for a king pin lock you could use the etrailer 5th Wheel King Pin Lock part # e98896. view full answer...
Go To Results