Filter Questions and Answers:

reset filter
Ladder Racks
Ladder Racks
 

Expert Answers about Ladder Racks


  • Ladder Rack System for RetraxONE XR Hard Tonneau Cover on a 2019 Ram 1500
  • As of right now (April 2019) the Yakima OverHaul HD # Y01151-58 (68" crossbars) and # Y01151-59 (78" crossbars) are the only ladder racks confirmed to fit with your RetraxONE XR Hard Tonneau Cover w/ Trax Rails # RTT-60243 (5-1/2' bed) or # RTT-60245 (6-1/2' bed). All you need for the OverHaul HD to fit the Trax Rails is the adapter kit # Y01155. One of the best things about the OverHaul HD is the ability to add eye bolts # Y01162, load stops # Y01161, or ladder roller # Y01163 for customized...
    view full answer...

  • Ladder Rack Options For Pace Edwards UltraGroove Cover On 2017 Ram 2500 6-1/2 Ft Bed
  • I do have a couple options for ladder racks to fit with the UltraGroove Retractable Hard Tonneau Cover part # 311-KRD7833 for the 2017 Ram 2500 6-1/2 ft bed without rambox but the Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43003XT-000 that you looked at is not compatible because the hardware will interfere with the covers mounting locations. I recommend to use the Ladder Rack for Pace Edwards UltraGroove Tonneau Covers part # 311-ELD0101 in the t-slots of the side rails...
    view full answer...

  • Recommended Over the Cab Ladder Rack for a 2018 Chevrolet Silverado 1500 with Removable Rear Bar
  • Yes, the rear bar on the Erickson Over-The-Cab Truck Bed Ladder Rack part # EM07707 can be removed without disassembling the entire rack. However, it is not easy to do so because there are 3-4 bolts per side as you can see in the attached photo. Also, you cannot drive with the rear bar detached because it plays too much of a part in the overall stability of rack. Instead, I recommend the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501150. As you can see in the attached...
    view full answer...

  • Ladder Rack That Fits RetraxPro XR Tonneau Cover on 2017 Ford F-2560 Super Duty
  • The Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB mounts using clamps and while it isn't compatible with the Trax Rails on your RetraxPro XR, part # RTT-80383 for a short bed or part # RTT-80384 for a long bed 2017 Ford F-250, I do have a ladder rack solution for you. Yakima had their OverHaul HD Ladder Rack # Y01151-5855 which includes adapters designed specifically for the Trax Rails on your tonneau cover. Some of the benefits of the OverHaul HD include the ability to to...
    view full answer...

  • Is Thule TracRac SR Ladder Rack Compatible with RetraxONE XR Tonneau Cover
  • The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT actually only fits on the black TracRac rails which have a raised section for the base to fit on (see attached), as opposed to the RetraxONE XR rails which essentially have a T-Slot. The only ladder rack that is compatible with the RetraxONE XR cover is the Yakima OverHaul HD which comes with 68" Crossbars # Y01151-5855 or 78" Crossbars # Y01151-5955 depending on the size of your truck. While this ladder rack does have a...
    view full answer...

  • 2018 Ford F-150 5.5 ft Bed Ladder Rack Compatible with Tracks on Retrax Pro XR Tonneau Cover
  • I've got a solution for you, but the Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB uses clamps to attach to the top and inside of your bed rails, so it is not compatible with the Trax Rails on the RetraxPRO XR # RTT-80373, compatible with your 2018 Ford F-150 with 5-1/2 foot bed. Take a look at the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-5855. This is the best option to add a ladder rack to your F-150 with a RetraxPRO XR bed cover because it is specifically...
    view full answer...

  • Budget-Friendly Ladder Rack That Can Handle Large Capacity for 2019 Ford F-150
  • I'm glad you asked because we absolutely have really good options for ladder racks that are both economical, can carry a lot of weight and fit your 2019 Ford F-150 - no matter what bed size it is. There are two options that stand above the rest, and both will be perfect for your needs, you can just get the one with the color you are looking for - either black or silver. - Buyers Products Truck Bed Ladder Rack with Load Stops # 3371501680 - Erickson Truck Bed Ladder Rack with Load Stops...
    view full answer...

  • Recommended Ladder Rack Compatible with BAKFlip MX4 Tonneau on 2017 Toyota Tundra
  • There is only one ladder rack that is compatible with the BAKFlip MX4, and that is the Adarac Pro Series ladder rack since it has uprights that are 90 degrees (perpendicular) to the truck bed rails. I've listed the Adarac Pro Series Ladder racks for each bed size that the 2017 Toyota Tundra is available with, so you'll want to choose from these: 5-1/2 Foot Bed # A4001665 6-1/2 Foot Bed # A4001671 8 Foot Bed # A4001676 All of these will allow your BAKFlip MX4 folding tonneau cover...
    view full answer...

  • Bike/Kayak Rack System For Ultra Groove Tonneau Cover
  • Since you already have the awesome Ultra Groove Tonneau Cover on your 2020 Silverado, I would suggest getting the ladder rack # 311-ELF0301 made for your cover # 311-KMFA19A45. This way you can have the kayaks sit over your cab so you don't have to have them hang off the back. If you did have them hanging off the back you would need to insert a load extender # Y01149 on the back. This rack will sit 24.5 inches above your bed rails and the crossbars will be great for using a kayak carrier...
    view full answer...

  • Ladder Rack for 2020 Toyota Tundra 5.5 ft Bed with Lomax Hard Cover
  • For your 2020 Toyota Tundra 5-1/2 ft bed without the deck rail system and a Lomax tonneau like the part # AB1050039 the best ladder rack fit for it will be with the Adarac Pro Series # A4001666 which installs through the top of the bed rails and allows the cover to fit easily with it. The uprights on the rack are totally vertical too which allows folding covers to easily have clearance.
    view full answer...

  • Ladder Rack that Fits 2015 Toyota Tacoma and Install Video
  • We have similar ladder racks that fit your 2015 Toyota Tacoma but the MaxxTow part # MT70423 that you referenced is not listed as a fit so we don't have a way to recommend this as a fit for your truck. Instead you'd want the Rola Haul Your Might # 59799 which is a fit. To see how it installs on a similar Tacoma check out the install video that shows it installed on a similar 2018 Tacoma.
    view full answer...

  • Ladder Rack Recommendation For 2019 Toyota Tacoma that Fits Well
  • We had the chance to install the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 on a 2018 Toyota Tacoma very similar to yours and found it fit well. I attached a link to a page that covers this install for you to check out and maybe compare to your install to see where the issue might be. For a similar ladder rack from a brand that has a better reputation in terms of fit we have the Thule TracONE part # TH27000XTB-XK4B that I would recommend highly. The quality is much higher...
    view full answer...

  • Ladder Rack and Tonneau Cover Options for a 2020 Ram 1500 with 5-1/2 Foot Bed
  • In order to use both a tonneau cover and ladder rack together on a 2020 Ram 1500 with 5-1/2' bed you only have a few options. The Adarac Custom Truck Bed Ladder Rack part # A70450 or Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A4001235 will work with any soft roll-up tonneau cover that mounts inside the bed rails like the TruXedo Lo Pro Soft Roll-up Tonneau Cover part # TX585901. The Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000965 will work with both soft and...
    view full answer...

  • Roof Rack for Winnebago Travato Class B Motorhome on 2017 Ram Promaster Chassis
  • The Thule TracRac TracVan # TH29613XT roof rack is designed to work with 2 pairs of the existing roof rack mounts on a Ram ProMaster. If your Winnebago Travato has those existing connection points on the roof, the TracVan ES roof rack would work perfectly for you. I've linked to a diagram showing what the mounts look like, and where they can be found on the roof. From the online photos I've seen, it appears the exterior of the ProMaster is unchanged from the cargo model, so it's very likely...
    view full answer...

  • How To Transfer Thule TracRac SR Sliding Ladder Rack to a 2019 Chevy Silverado 1500 6-1/2 Bed
  • The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2019 Chevrolet Silverado 1500 with 6-1/2' bed is part # TH43002XT-781. It sounds like you might be trying to transfer the Thule TracRac SR Sliding Truck Bed Ladder Rack from another truck so if that is the case you will need the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks part # TH21781 which comes with rails and the correct hardware for the oddly shaped stake pocket openings. This hardware however can be...
    view full answer...

  • Best Tonneau Cover for Thule TracRac SR Sliding Ladder Rack for a 2020 Ford F-150 5.5 Bed
  • The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2020 Ford F-150 with 5-1/2' bed is part # TH43002XT-508. In regards to tonneau cover compatibility, the BAK Revolver X4 Hard Tonneau Cover part # BAK79329 is the best option as it's super durable and fits perfectly. The Thule TracRac SR Sliding Truck Bed Ladder Rack is only offered in silver.
    view full answer...

  • Is There a Ladder Rack and Hard Tonneau Cover that Can Fit 2018 Nissan Titan XD Short Bed
  • There is only one option for a ladder rack for your 2018 Nissan Titan XD 6-1/2 foot bed that will allow you to also install a hard tonneau cover and that's with the Thule TracRac SR part # TH43002XT-501 as it installs through the top of the bed rails which allows a tonneau that installs between the bed rails to also fit. There's only one tonneau cover that has the correct clearance for your truck to fit with the base rails and not cause interference and that's the BAK Revolver part...
    view full answer...

  • Recommended Ladder Rack Compatible with Undercover Flex Tonneau on 2018 Nissan Titan XD
  • I may have a solution for you on this, but it doesn't look like there are any stake pocket mounted ladder racks that we carry that will work with your 2018 Nissan Titan XD and your Undercover Flex tonneau cover. If your tonneau cover mounts inside the bed rails and does not sit above the tops of the bed rails you might be able to make the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-501 work, but this is not something we have tested together. We typically recommend...
    view full answer...

  • Recommended Ladder Rack and Tonneau Combination for 2021 Chevy Silverado 1500
  • In order to use a ladder rack like the Thule TracRac SR Sliding Rack # TH43002XT-782 to carry your kayaks while also having a tonneau cover, I recommend using the BAK Revolver X4s # BAK62VR. This ladder rack and tonneau cover are compatible since the Revolver X4s mounts inside the bed rails and the TracRac SR mounts on top of the rails. I really like that the TracRac sits above the cab, so it's great for carrying kayaks and will keep them from scratching up the roof of the cab. The Revolver...
    view full answer...

  • Best Way To Haul Kayaks On My 2013 Ram 1500 With A BAKFlip Mx4 Tonneau Cover
  • There is a ladder rack that is compatible with most hard folding tonneau covers like your BAKFlip Mx4 # BAK48207, the Lomax Hard Tonneau Cover # AB1040019 and soft tonneau covers like the Access Lorado # 834532001675, but the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000 isn't going to be the best fit. The TracRac SR does use the stake pockets to install the rails, but my concern is how large the rails are. They will overhang the bed rails just enough to make it difficult...
    view full answer...

  • Pickup Ladder Rack with Removable Rear Crossbar for Loading Taller Items
  • I have a good solution for you and while it isn't nearly as attractive as the Thule part # TH500XTB the Buyers Products Over-The-Cab Truck Bed Ladder Rack part # 3371501150 will get the job done the easiest out of the options available. Check out the video Hayden did on it below. As you will see the rear bar is very easily removable with just two snapper pins. If the center bar poses an issue you can see in the video it is just held in place with a single bolt on each side so it is...
    view full answer...

  • Recommended Ladder Rack for 2020 Toyota Tundra with Deck Rail System
  • For your 2020 Toyota Tundra that's equipped with the Deck Rail System I highly recommend the Adarac Pro Series Custom Ladder Rack; part # A4001666 if you have the 5-1/2 foot bed, part # A4001671 if you have the 6-1/2 foot bed, or part # A4001676 if you have the 8 foot bed. This is an excellent, aluminum constructed ladder rack system (it won't rust over time) that installs right on top of the bed rails of your Tundra. It won't interfere with the Deck Rail System at all and its mounting...
    view full answer...

  • Recommended Tonneau Cover Compatible with Yakima Overhaul HD Ladder Rack
  • There are tonneau covers for your 2020 Ford Ranger that are compatible with the Yakima Overhaul HD # Y01151-58, and it's one of our more popular tonneaus. Have a look at the Retrax XR Series with Trax Rails which is part # RTX98FR for the 6ft bed on the Ranger and part # RTT-60335 for the 5 foot bed. Using the Retrax XR does require the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155. This is a manually retracting hard cover made of hard Lexan...
    view full answer...

  • Kayak Karrier Compatible with Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever
  • Since the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever # TH43002XT-781EX uses crossbars that are slightly larger than regular roof rack crossbars you need to used a kayak carrier that mounts using the tracks. For a Thule option this means you need the Hull-A-Port Aero Kayak Carrier # TH849000 which is a great carrier that comes with everything you need to secure 1 kayak. Since you are wanting to travel with 2 you need 2 of the Hull-A-Port Aero Kayak Carrier. If you want...
    view full answer...

  • Truck Rack Options For 2020 GMC 1500 Sierra SLT With Revolver X4 Tonneau Cover
  • Since you have the BAK Revolver X4 Hard Tonneau Cover # BAK72VR you can use the Adarac Pro Series Custom Truck Bed Ladder Rack # A4002965 because the Revolver X4 does not use a lot of bed rail space and leaves the stake pockets open. That's where the Adarac Ladder Rack Installs, in the stake pockets. This version of the ladder rack has upright posts unlike the other rack that taper inward towards your truck bed. There are two colors for that style, the aluminum version # A4002966 and the...
    view full answer...

  • Does the Base Rails Come with the Thule TracRac SR Sliding Ladder Rack # TH43002XT-508?
  • The base rails that are designed to fit the 2018 Fort F-150 (5-1/2 foot bed) - Ford Super Crew Trucks # TH21508 come with the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-508. The Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH21610 are designed to fit only Short Bed Toyota Tundra Trucks only.
    view full answer...

  • Is The Weight Capacity for Adarac Pro Series Custom Truck Bed Ladder Rack Moving or Stationary
  • The Adarac Pro Series Custom Truck Bed Ladder Racks like part # A4000950 have a 500 lb weight rating and they will work just fine for a rooftop tent. The 500 lb weight rating will be the same for both stationary and moving. I agree that this would then indicate the stationary weight capacity is likely higher but we cannot provide an exact capacity as the manufacturer simply does not do this sort of extensive testing. The only type of ladder rack I am aware of which gives multiple weight...
    view full answer...

  • Does the Thule TracRac SR Work on a 2020 Chevy Silverado 1500?
  • Yes. The Thule TracRac SR Sliding Ladder Rack is a confirmed fit on all bed lengths of the 2020 Chevy Silverado 1500. The beauty of the TracRac is that it doesn't require any drilling to install it; the tracks mount directly into the stake pockets on your truck bed rails- so the installation is really quite easy. The one thing to note during installation for the 2020 Chevy Silverado is that you'll need to use the included adapter for the rear stake pocket as shown in the attached instructions-...
    view full answer...

  • Recommended Ladder Rack for 2020 Toyota Tacoma With Optional Bed Rail System
  • The right ladder rack will depend on what you're wanting to use it for. If you're mounting this on something that's strictly a work truck, you won't need any height adjustment so something like the Thule TracRac TracONE with its 800 lb capacity, part # TH27000XTB-XK4B for Black or # TH27000XT-XK4 for sliver would work perfectly. Either rack kit would mount using the bed rails you mentioned, and wouldn't require any drilling for installation. If you also have a crossover toolbox, you'll...
    view full answer...

  • Will Thule Xsporter Pro Truck Bed Ladder Rack From 2004 Toyota Tacoma Fit In 2015 Toyota Tacoma
  • The Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB you have on your 2004 Toyota Tacoma Access Cab will fit on your 2015 Toyota Tacoma Access Cab by using the Toyota Tacoma Adapter Kit for Thule Xsporter Pro Ladder Rack - 2005 to 2015 # THXK3. I included a video of the Thule # TH500XTB for you to take a look at.
    view full answer...

  • Wind Deflector for Buyers Products Ladder Rack
  • Though there isn't a mesh available there is absolutely an air deflector for the Buyers Products Over-The-Cab Truck Bed Ladder Rack - Aluminum # 3371501400 or Black # 3371501410. The Wind Deflector Kit for Buyers Products Truck Bed Ladder Rack # 3371501193 will ensure you have a quieter ride in your 2017 Chevy Silverado. I have added links to video reviews of both the rack and wind deflector for you to check out.
    view full answer...

  • Ladder Rack Recommendation For 2005 Dodge Ram Short Bed Pickup
  • The Erickson Truck Bed Ladder Rack # EM07708 would be a solid fit for your situation. If you're tired of using your cab window and especially in the case for a short bed pickup with a large bed box, this rack allows for additional storage on top of your bed, is side mounted, and the black powder coat looks to be an attractive fit for your 2005 Ram 1500 given the picture you provided too.
    view full answer...

  • Strongest Ladder Rack for 2018 Toyota Tacoma Double Cab with Deck Rail System
  • For your heavy-duty application I recommend the Thule T-Rac Pro2 Ladder Rack # TH37005XT which is rated for 1000-lbs. This fixed-height rack is aluminum so there is no worry about rust or corrosion. The slotted crossbars let you easily mount and adjust accessories such as the included heavy-duty load stops. If you prefer a rack with a 3rd over-the-cab crossbar we have that option too with Pro2 rack # TH37005XT-EX. These Thule racks are the highest capacity ladder racks for your truck. If...
    view full answer...

  • Recommended Ladder Rack And Roof Rack For 2018 Toyota Tacoma With Tonneau Cover
  • The Adarac Pro Series Custom Truck Bed Ladder Rack # A66ZR you were looking at, which also comes in Black # A76ZR, is the ladder rack you will want to go with. This is confirmed to fit your 2018 Toyota Tacoma 5' bed and it is compatible with tonneau covers that install inside the bed rails. Based on the photo you attached, it looks like your tonneau cover could possibly be covering up the stake pockets in which the ladder rack installs into. The only way to know would be to pop out the...
    view full answer...

  • Ladder Rack for my 2015 Toyota Tundra with the Deck Rail System
  • I have really good and very similar option for you. But there are no adapters to connect the TracRac to the Deck rail system. Instead using the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility part # Y01151-5868 will get the job done. It attaches directly to the deck rail system and will give you a 500lb. capacity. The kit contains Toyota/Nissan Utility Track Adapter Kit for Yakima OverHaul HD partt # Y01168 Yakima OverHaul HD Adjustable Truck Bed Ladder Rack Uprights...
    view full answer...

  • How to Carry Two Kayaks On 2015 F150 6 1/2 Foot bed With BakFlip Hard Cover
  • The best way to carry 2 kayaks on your 2015 F150 6 1/2 foot bed is a ladder rack. I recommend Truck Hero part # TH92FR. The Adarac installs on the bed rails of the truck so it does not interfere with the BakFlip G2 part # BAK26327 installation location. It also allows you to fold your cover up when you need access to the bed without interference compared to other ladder racks that are not compatible with tri-fold hard covers. The bars on the ladder are 72 inches long so you can carry both...
    view full answer...

  • Will The Thule Hullavator Work With My Adarak Ladder Rack?
  • We have other options for carrying a kayak, but the Hullavator # TH711420 will not work with your truck due to the lack of overhang of your bars over your feet with the Adarac Ladder Rack # A4001665. If you're looking to load up your kayaks easily, having a roller will help if you're loading from the back # RR1500. This will mount via T-Tracks on top. You could possibly use the roller with the Malone MegaWing # MPG207
    view full answer...

  • Ladder Rack Recommendation that Fits 2019 Ram 1500 with Gator HR1 Tonneau
  • The Gator HR1 is very similar to the BAK Revolver line of tonneau covers which installs between the bed rails far enough that an Adarac ladder rack will fit and work well with. So if you have a 5-1/2 foot bed you'd want the part # A4000965 or if you have a 6-1/2 foot bed you'd want the part # A4000944. These are aluminum ladder racks that mount through the top of the bed rails and allow a tonneau like yours to fit between.
    view full answer...

  • Ladder Rack Options For 2018 Ford F-150 With Crossover ToolBox On Bed Rails
  • The Buyers Products Over-The-Cab Truck Bed Ladder Rack # 3371501400 is not adjustable along the bed rails and is not adjustable in height, although it can be installed in various positions in order to fit different sizes of truck beds. It is confirmed to fit the 2018 Ford F-150 you linked as your vehicle regardless if it has the 5-1/2 Foot Bed, 6-1/2 Foot Bed, or 8 Foot Bed. I think your best option is a roof rack so that you can have access to the entire truck bed along with the toolbox....
    view full answer...

  • Correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2018 Ford F-450
  • The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for a 2018 Ford F-450 is part # TH43003XT-000 which is composed of part # TH43003XT and part # TH21000.
    view full answer...

  • Ladder Rack Recommendation for a 2018 Ford F-150 5-1/2 Foot Bed with Tri-Fold Tonneau Cover
  • The Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 which is a fit for your 2018 Ford F-150 will work with your existing tonneau cover so long as it does not cover the stake pocket holes. The BAKFlip MX4 Hard Tonneau Cover part # BAK48329 for example does not cover the stake pocket holes. If your tonneau cover does cover the stake pocket holes then there would be no way to install a rack over this and your only option would be a roof rack, the Rhino-Rack Vortex Aero Crossbar...
    view full answer...

  • Will the Thule Hull-A-Port Kayak Carrier Fit the Thule Xsporter Pro Ladder Rack
  • In order to attach the Thule Hull-A-Port Kayak Carrier part # TH834 to the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT you will need the Watersports Adapter for Aeroblade/Aeroblade Edge Bars part # THXADAPT11. The Xsporter's crossbars are too large for the Hull-A-Port to wrap around which is why you need to use the Watersports Adapter because this converts the Hull-A-Port to mount using the track system.
    view full answer...

  • Ladder Racks for 2018 Toyota Tundra with Deck Rail System
  • We can help you with a ladder rack for your 2018 Tundra that has the deck rail system no matter which bed length it has. We have racks to fit the 5-1/2-foot, 6-1/2-foot and the 8-foot long bed models. If you have the 5-1/2-foot bed I suggest the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This rack mounts directly in your deck rail system and it offers an 800-lb weight capacity. This option is a great value. But if you have the 6-1/2-foot or 8-foot bed then you can use...
    view full answer...

  • Adarac PRO Series Racks Overall Height Above Bed Rails
  • The Adarac Pro # A4000952 is 30" tall from the bed rail to the tallest point of the rack when installed. This rack is designed to sit a couple inches above the cab, as well. For carrying kayaks, you'll want to add the Aluminum Tie-Downs # A4000882 to provide a secure tie down point or the Load Stops # A4000880 which have tie down points integrated while also providing stabilization of your cargo.
    view full answer...

  • Does Thule TracRac SR for 2015 GMC Sierra 2500 Come With Expansion Blocks
  • The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-781 comes with the needed expansion block pocket mounts so there is no need to order them separately if you are getting this ladder rack for your 2015 GMC Sierra 2500 with a 6-1/2 foot bed. If you just need the blocks they are Replacement Rubber Block for Base Rail Installation of TracRac Sliding Ladder Racks # TARB-11032-1.
    view full answer...

  • Comparing Yakima OverHaul and Thule Xsporter Ladder Racks for a 2020 Ford Ranger
  • The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part # Y01151-58 and Thule Xsporter Pro Truck Bed Ladder Rack part # TH500XTB are both excellent options for a 2020 Ford Ranger. In order to use either with a crossover style toolbox, you'll need to simply slide the upright away from the cab to clear the toolbox but there is not an adapter to install on top of the mounting feet. In regards to compatibility with roof rack mounted accessories, they will both work well for this but...
    view full answer...

  • Ladder Rack in Black for my 2020 Jeep Gladiator
  • We have the black in Thule with the Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Matte Black part # TH27000XTB and the Yakima Outdoorsman 300 Ladder Rack with 66" CrossBars for Compact Trucks part # Y01136-Y00410. Thes are fixed heights. These are both confirmed fits for you Gladiator but do not utilize the track system to connect.
    view full answer...

  • Recommended Ladder Rack For A 2021 Chevy Silverado 1500 With Tri-Fold Tonneau Cover
  • The Adarac brand we carry offers compatible ladder racks for your 2021 Chevy Silverado 1500 that will allow you to retain the use of your tri-fold tonneau cover. These racks work with inside-the-rail tonneau covers allowing you to gain 500lbs of load-carrying capacity without sacrificing your bed cover. For a 5-3/4' bed the Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500lbs Item # A4002966. For a 6-1/2' bed the Adarac Pro Series Custom Truck Bed Ladder Rack -...
    view full answer...

  • How to Minimize Wind Noise on MaxxTow Ladder Rack
  • I recommend to use a Thule Top Channel Cover part # 852-5402-013 to insert into the T-channel on the aero bars of the ladder rack part # MT70423. I went to the warehouse and tested the top channel rubber strip and it fits the T-channel on the Maxxtow Aero bars on the top and the bottom channel. The rubber stripping is designed to cut down on wind noise because it blocks the wind from getting into the T-channel and creating a whistling sound. The strip does need to be cut around accessories...
    view full answer...

  • Thule TracRac Installation with Truck Bed Tool Box
  • While it is going to be possible to mount the front towards the middle of your truck bed, it's not recommended. Moving the mounting points away from the 4 corners of the truck bed will reduce the carrying capacity of your TracRac system and the closer crossbar spread will likely change the center of gravity on the ladders you're carrying, causing some extra bouncing and possible damage to your load. Thule makes a Toolbox Mount kit # TH41000 specifically for the TracRac system that provides...
    view full answer...

  • Thule TracRac SR for Ford F150 Super Crew 5.5 Bed with Folding Tonneau
  • The Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH43002XT-508 will work well with your BakFlip tonneau. The only thing that you will need to do with a folding cover like that is to move the rack forward and back as needed when folding. The side rails aren't an issue but the uprights of the rack lean inward and will be an issue at certain points for the straight edges of the tonneau pieces. Moving them forward and back will work well and allow you to use both.
    view full answer...

  • Adarac Aluminum M-Series Custom Truck Bed Ladder Rack On 2016 Toyota Tundra -
  • I don't have the dimensions for the Tundra, but I can tell you that the distance from the bedrail to the top of the crossbar (excluding load stops on the ends of crossbars is 11-1/2" tall. You can subtract this from the total cab height of your truck to determine the measurement from the crossbar to the top of the cab. I have attached a dimensioned picture of the AdaRac # AD86FR to illustrate this. A popular item that users aditionally get are the AdaRac # A4000882 tie down points
    view full answer...

  • Thule TracRac System For Chevy 1500 Plus Tonnueu Cover
  • The Thule # TH43002XT-782EX TracRac System with Cantilever is sized for a 5-1/2 foot bed and is not available in black but rather silver double-coat powder finish. This finish is applied over aluminum so you will not have corrosion issues. Tonneau covers known to fit are the Bak # BAK79120 Revolver X4 roll up cover and the Bak # BAK39120 Revolver X2 roll up covers. The X4 model has a much beefier locking latches and heavier look and feel of the vinyl. After initial setup of your...
    view full answer...

  • How To Add a Side Rail To a Ladder Rack for a Rooftop Tent
  • The only ladder rack that we offer with a side bar option is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part # Y01151-58 when used with the SideBar Rails for Yakima OverHaul HD part # Y01153 or part # Y01154. There is not a side bar option for the Thule Xsporter Pro Truck Bed Ladder Rack part # TH500XTB. That said, most roof top tents like the Yakima SkyRise HD Tent part # Y07436 or the Thule Tepui HyBox Rooftop Tent part # TH8001HB112 do not require any sort of side rail. If...
    view full answer...

  • Adarac Pro Series Ladder Rack Compatibility with BAKFlip 4 Tonneau Cover on 2017 Ram 2500
  • The Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000955 is the fit for certain Ford models. You will instead want # A49FR for a 6-1/2 foot bed or # A69FR for an 8 foot bed on your 2017 Ram 2500. The Adarac Pro Series Custom Truck Bed Ladder Rack will work well with your BAKFlip 4 tonneau cover.
    view full answer...

  • Ladder Rack for a 2018 Ram 1500 With Roll-N-Lock M-Series Cover
  • I have attached for you below a list of the ladder racks that are compatible with the Roll-N-Lock M-Series Cover on your 2018 Ram 1500. That said, none of these are adjustable nor do they offer an option for this that will work with your tonneau cover. Adarac Custom Truck Bed Ladder Rack (Good) 5-1/2' Bed - part # A70450 6-1/2' Bed - part # A70480 Adarac Aluminum Series Custom Truck Bed Ladder Rack (Better) 5-1/2' Bed - part # A4001235 6-1/2' Bed - part # A4001219 Adarac Pro...
    view full answer...

  • Ladder Rack for 2018 Chevy Silverado 1500 5 ft 9 in Bed with BAK BAKflip MX4 Tonneau Cover
  • We do offer ladder racks that will fit with tonneau covers that attach to the inner edge of the bed side rails like the # BAK48120 BAKflip MX4. The best option is the Adarac ladder rack, because it features uprights that are perpendicular to the bed sides, and will not interfere with your ability to fully open the tonneau cover so it's folded against the rear of the truck cab. For your 2018 Chey Silverado 1500 with the 5 foot 9 inch bed (which everybody refers to as the '5-1/2 foot...
    view full answer...

  • How to Determine if TracRac SR Ladder Rack Will Fit 2019 Ford F-150 With 56 Bed and Tonneau Cover
  • Based on my research there seem to be numerous tonneau covers from Ford that fit a 2019 Ford F-150 with a 5'6" bed and there is no way for us to know exactly what you have or what tonneau covers those are because our products are entirely aftermarket. That means although I can't guarantee any type of fit, I can tell you what you need to know in order to determine if the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-508 will fit your '19 F-150 you need to take a look at how...
    view full answer...

  • Recommended Ladder Rack for 2007 GMC Sierra 2500 6.5' Bed with Tonneau Cover
  • In order to mount a ladder rack on a 2007 GMC Sierra 2500 6.5' bed with tonneau cover you'll need to use one that mounts in the stake pockets. The best options we have for this are listed below. Adarac Custom Truck Bed Ladder Rack part # A70530 Adarac Aluminum Series Custom Truck Bed Ladder Rack part # A79FR Thule TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-501 I recommend the TracRac SR because of its adjustability but the others are great options as well.
    view full answer...

  • Fishing Kayak Carriers That Fit On A Thule TracRac TracOne Ladder Rack
  • You will encounter some limitations due to the length and weight of your kayaks. With regard to the length of your kayaks, you will not be able to use any kayak stackers, thus eliminating your opportunity to carry three boats on your Thule TracRac TracOne Truck Bed Ladder Rack - Fixed Mount - 800lbs - Silver, part # TH27000XT. The weight of your kayaks will also limit your j style carrier options. I like j style carriers because there is not a focused concentration of weight on the hull...
    view full answer...

  • Will My BAKFlip G2 Tonneau Cover Open with an Adarac Custom Ladder Rack on My 2016 Toyota Tundra?
  • Yes, I confirmed with BAK that the longest panel on the BAKFlip G2 Hard Tonneau Cover - Folding - Aluminum # BAK26410 is about 22 inches. Since the height of the supports of the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars - 500 lbs # A4001678 is 25-7/8 inches, your BAKFlip G2 will be able to fold without interference.
    view full answer...

  • Black Ladder Rack for 2019 Chevy Silverado 1500
  • There is a ladder rack for your 2019 Chevy Silverado 1500 that comes in black, though the T-Rac Pro2 Truck Bed Ladder Rack # TH37002XT is only available in its silver finish. For a black ladder rack there is the Thule TracRac TracONE Truck Bed Ladder Rack # TH27000XTB which will look great on your truck. The TracONE does have an 800 lb capacity which is slightly less than the capacity of the T-Rac Pro2, and the TracONE does not have the Toolbox Mounting Kit incorporated in the mounting...
    view full answer...

  • Ladder Rack Recommendation for 2016 Chevy Silverado 2500 Short Bed with Roll Up Tonneau
  • It would be kind of a tight fit but the Thule TracRac SR part # TH43002XT-781 is a fit for your 2016 Chevy Silverado 2500 short bed and will fit with your Lo Pro tonneau cover that installs to the inside of the bed rails.
    view full answer...

  • Thule TracRac SR Ladder Rack System for 2021 Chevy Silverado 1500
  • The Thule TracRac SR you'd looked at, part # TH43003XT-501 is a fit for a Dodge Ram 6-1/2 foot bed truck, so it wouldn't work for your truck. The good news is that Thule does indeed offer a TracRac SR model that is a confirmed fit for your 2021 Chevy Silverado 1500 with the 5-1/2 bed, which is part # TH43002XT-782. More good news, the TracRac SR is compatible with tonneau covers that mount to the INSIDE of the bed sides. As long as the top of the bed sides are clear to accept the SR...
    view full answer...

  • Ladder Rack For 2020 Ford F-150 With BAKFlip MX4 Tonneau Cover To Carry 2 Kayaks
  • The best ladder rack for your 2020 F-150 5-1/2' bed with BAKFlip MX4 tonneau cover is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000964. Your tonneau cover mounts inside the bed rails, allowing the truck bed rails to be free for the Adarac ladder rack to install onto. This ladder rack has straight upright bars which allow for the tonneau cover to fold properly, whereas some other ladder racks have slanted upright bars which restrict folding of the cover....
    view full answer...

  • Recommendations for Roof Racks Compatible with Tonneau Covers on Ford F-150 with 5.5 Ft Bed
  • We have a couple of rack options that are compatible with tonneau covers. Both feature aluminum construction and can be mounted at roof height. If you have a cover that installs completely inside the truck bed rails like the Lomax Hard Tonneau Cover # AB1010019, the best rack is the Thule TracRac # TH43002XT-508EX. This rack can be quickly removed from the truck bed and uses adjustable T-track base rails along the full length of your bed. It also features 4 Side cleats that attach to...
    view full answer...

  • Could Erickson Ladder Rack EM07705 Fit 2020 Toyota Tundra with Deck Rail System
  • The Erickson Truck Bed ladder rack part # EM07705 that you referenced fits the versions of your 2020 Toyota Tundra that do not have the deck rails. You could pretty easily take the rails off and install this ladder rack or you could go with a different rack that fits with the rails like the Rola Haul Your Might # 59799.
    view full answer...

  • Replacement Load Stops for Buyers Products Truck Bed Ladder Rack
  • I have a solution for you, but there are no direct replacement load stops for the Buyers Products Truck Bed Ladder Rack # 3371501680 available. Because the crossbars on the Erickson Truck Bed Ladder Rack # EM07705 are the same 3-1/4" wide x 1-1/2" tall you can use the Replacement Load Stop Assembly for Erickson Aluminum Truck Bed Ladder Rack # EM57705 as a replacement load stop. These will fit snugly on the cross bars of your Buyers Products ladder rack and provide you with a similar style...
    view full answer...

  • Is the Adarac Aluminum Series Custom Ladder Rack Compatible with a Pace Edwards Switchblade
  • Yes. The Adarac # A66RR is compatible with the Pace Edwards Switchblade # PE29UV since the Adarac sits on top of the bed rails and the Switchblade mounts inside the rails. Because this is a fully retractable cover it's not going to be obstructed by the rails or uprights on the Adarac, so they make a great pair.
    view full answer...

  • How To Carry Kayaks On a 2018 Ford F-150 with Tri-Fold Tonneau Cover
  • The only ladder rack that allows for 100% fully unimpeded use of a tri-fold tonneau cover is the Adarac Pro Series Custom Truck Bed Ladder Rack part # A4000964 for 5-1/2' beds or part # A4000946 for 6-1/2' beds. This ladder rack mounts in the stake pockets so the tri-fold tonneau cover must sit inside the bed rails such as the BAKFlip MX4 Hard Tonneau Cover for example. This ladder rack also has vertical uprights which will clear the panels on your tonneau cover when you go to fold them...
    view full answer...

  • Recommended Ladder Rack For A 2018 Chevy Colorado With A BAKFlip G2 Tonneau Cover
  • For your 2018 Chevy Colorado with a 5' bed and BAKFlip G2 Hard Tonneau Cover # BAK26126 I recommend the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001225. This ladder rack will mount in the stake pockets in your bedrails allowing you to retain use of your tonneau cover. This rack has an extruded anodized aluminum finish on crossbars and rails provides extra durability and corrosion resistance and a weight capacity of 500lbs.
    view full answer...

  • Base Width of MaxxHaul Truck Bed Ladder Rack # MT70386
  • The MaxxHaul Truck Bed Ladder Rack # MT70386 will fit a rail width of between 52 and 71 inches, depending on how the vertical uprights are oriented. This unfortunately means that the rack isn't wide enough to mount to the rails on your utility trailer that are spaced apart by 78 inches. I'm not sure exactly what you are wanting to add the rack for but another option is with the Pack'em Ladder Rack, which comes in a 2 Ladder # PK-28WL2-BMH or 1 Ladder # PK-28WL-BMH model. These towers...
    view full answer...

  • Tonneau Cover and Rack System for 2020 Jeep Gladiator to Carry Kayaks
  • There are tonneau covers and roof rack systems for your 2020 Jeep Gladiator that will allow you to carry kayaks, but ladder racks (truck bed racks) are not compatible with a tonneau cover on your Gladiator. The reason is all the ladder rack systems for your Jeep require the use of the inside bed rails to clamp on and install, which would interfere with a tonneau cover. If you want to forego a tonneau cover you can install a rack system, the Yakima OverHaul HD Adjustable Truck Bed Ladder...
    view full answer...

  • Compatibility of Ladder Rack with Gator SR1 Tonneau Cover
  • Because your Gator SR1 tonneau cover mounts on top of the bed rails, there is not a ladder rack that is directly compatible. Based on you looking at the # A70480, I assume you have a 2010- present Ram with 6-1/2 foot bed. The closest option if you can get to your stake pockets is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000956. This rack uses the stake pockets for mounting and will be the widest mount with straight upright bars to give you the best...
    view full answer...

  • Thule TracRac SR Base Rails for a 2015 Ford F-150 with 6-1/2' Bed
  • The correct Thule TracRac SR Sliding Truck Bed Ladder Rack for your 2015 Ford F-150 with the 6-1/2' bed is part # TH43002XT-501 with just the base rails being part # TH21501. Even though you say you do have all of the mounting parts, I recommend taking a look at the linked installation instructions to ensure you do have all of the parts needed to install this on your pickup.
    view full answer...

  • Truck Bed Ladder Rack That Can Carry Kayaks On A 2014 Ram 3500
  • I have a solution for you, however, the MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack # MT70232 is not compatible with kayak carriers due to the incorrect bar size and no top-channel track. You can either haul the kayaks directly on top of the MaxxTow Ladder Rack or you can go with a different ladder rack that is compatible with kayak carriers. For a similar Over-The-Cab Ladder Rack design I highly recommend going with Thule TracRac SR Sliding Truck Bed Ladder Rack. Use # TH43003XT-501EX...
    view full answer...

  • Ladder Rack and Tonneau Cover Combination for 2018 Ford F-150 Short Box for Kayak Transport
  • Thank you for all the details on your desired setup. In my opinion nothing compares to the combination of the TracRac SR adjustable ladder rack and BAK Revolver hard tonneau cover. Both of these are outstanding products and they are fully compatible with each other on your F-150 short box. The USA-made TracRac SR sliding ladder rack # TH43002XT-508 has a 1250-lb weight rating and includes adjustable load stops. This rack gives you the wide crossbar stance and weight capacity you...
    view full answer...

  • 2014 Chevy Silverado 1500 W/ Bed Cover Ladder Rack Recommendation
  • The Adarac Aluminum Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs, part # A46FR, is a ladder rack that mounts to the stake pockets. It does not clamp to the truck bed. It comes with adjustable load stops and a t-channel, so it will work with channel mounted accessories. This ladder rack has a 500lb weight limit. I have included a product description link below.
    view full answer...

  • Will the Thule TracRac SR fit a 2021 Dodge Ram 1500 with a 5 Foot 7 Inch Bed?
  • I confirmed that my contact at Thule that the TracRac SR parts you need to fit your 2021 RAM 1500 with a 5'7" bed (single cab or crew cab) is the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks # TH24RV and the Thule TracRac SR Sliding Truck Bed Ladder Rack for Dodge Ram and Ford Super Duty Pickups # TH43003XT. This part combination will let you mount your ladders and other cargo to your 2021 Dodge RAM 1500 - 5'7" bed.
    view full answer...

  • Tonneau Cover and Ladder Rack Options that Fits 2011 Chevy Silverado 1500 6-1/2 ft Bed
  • The issue that you'd most likely run into with the BakFlip you have # BAK48101 and the TracRac SR part # TH43002XT-501 is that the base rail of the TracRac rests slightly over the inside edge of the truck bed rails like you can see in attached picture which would interfere with your tonneau from opening. Bak does have their Revolver part # BAK62FR which does have a narrow enough cover that it would not interfere with the base rails. Or you could use your current tonneau with the...
    view full answer...

  • Replacement Crossbar Hardware for Yakima Y01151 OverHaul HD Truck Bed Ladder Rack
  • Although Yakima doesn't offer the M8 x 18mm security Hex Screw as a separate item, they do offer the screws as part of their # Y42XR replacement hardware kit which includes 4 of the M8 x 18 screws, 4 flat washers, 4 lock washers and 2 nut plates. As you can see by using the provided link, the kit is very inexpensive and it never hurts to have some spare parts around. I'd also think about using some thread locker like # LT37420 to make sure the hardware doesn't back out again.
    view full answer...

  • Tonneau Cover For 2019 Ford F-250 Super Duty Short Bed To Use With Thule TracRac SR
  • The only tonneau cover that is 100% compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs part # TH43003XT-785 for the 2019 Ford F-250 Super Duty 6-3/4 foot bed is the BAK Revolver X4 Hard Tonneau Cover part # BAK79330. This is the only cover that does not interfere with the uprights of the ladder rack or the rails of the cover. It is a roll up cover that is designed with an aluminum underside with soft vinyl black top for the durability of a hard cover but convenience...
    view full answer...

  • Which Pace Edwards Contractor Rig Rack Fits 2008 F250 Super Duty with 6.5’ ft Bed
  • I checked with Pace Edwards and the Contractor Rig Rack part # 311-CR4008 is a confirmed fit for your 2008 Ford F-250 Super Duty with a 6-1/2 foot bed and not the part number you mentioned.
    view full answer...

  • Recommended Aluminum Ladder Rack in Black for a 2006 Nissan Titan Without Utility Track System
  • I do have an option for you but the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799 is designed specially to be used with the factory track/channel system on Nissan and Toyota trucks therefore there would be no way to attach to a truck that did not use the factory track/channel system. For a similar ladder rack that will work on your 2006 Nissan Titan without the factory track/channel system, I recommend using the Buyers Products Truck Bed Ladder Rack w/ Load Stops part #...
    view full answer...

  • Replacement Bed Rail Clamps and T-Bolts for Thule Xsporter Pro Ladder Rack
  • We have each of the replacement parts you need for your Thule Xsporter Pro Ladder Rack # TH500XT (Silver) or # TH500XTB (Black). The bed rail clamps you referred to are sold individually, so you will need Replacement Bed Rail Clamp # 8523159001 (Silver) or # 8523159002 (Black). As for the "t-plate" you referenced, I believe you were asking about the Replacement T-Slide Casting for Thule Xsporter Pro Ladder Rack # 8523164001. As for bolts, the only bolts that this rack uses are the Replacement...
    view full answer...

  • Thule TracRac SR for 2019 Chevy Silverado Trail Boss
  • The issue we're going to run into is that the BAKflip MX4 # BAK448130, is not a great fit for the Thule TracRac SR # TH43002XT-782 because the wide rails on the TracRac SR overlap with the seals on the MX4. In addition to this, you would need to move the rear rack forward in order to fold the cover up each time and with continuous use the seals on the cover will wear out. The only confirmed tonneau cover that will work with the Thule TracRac SR is the BAK Revolver X4 # BAK79130, which...
    view full answer...

  • What Thule SR Ladder Rack Will Fit My 2018 RAM 2500?
  • We do currently have a Thule SR Ladder Rack that fits your 2018 RAM 2500. If you have a 6-1/2 bed (without Rambox), I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-501. If you have an 8-foot bed, I recommend the Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43003XT-000. The great thing about the Thule SR Ladder Rack is that it mounts in the stake pockets in your truck without interfering with the inside of your bed rails. This capability makes it great...
    view full answer...

  • Thule Hull-A-Port Kayak Carrier Compatibility With TracRac Ladder Rack
  • The Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style - Fixed - Side Loading # TH834 is compatible with a TracRac Ladder Rack when you use the adapter # THXADAPT11 to utilize the top channel for mounting.
    view full answer...

  • Can I Convert Rain Gutter TracRac to Work on Fixed Mounting Points of 2016 Ford Transit T350
  • Yes. You could use your old Thule TracRac TracVan Van Ladder Rack - 3 Bar - 750 lbs # TH29056XT bars and convert them over for use on your 2016 Ford Transit T350. You would need to use the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 # TH460R and the Fit Kit for Thule Podium-Style Roof Rack Feet - 3138 # THKIT3138, which would allow you to use your old bars. Because the cost isn't that much different purchasing everything separately, you may want to just order the entire...
    view full answer...

  • Bed Rack Compatible With A Backflip MX4 Tonneau Cover On A 2017 Ford F-150 With 5-1/2ft Bed
  • The only rack compatible with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish Item # BAK48329 on your 2017 Ford F-150 is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs Item # A4000955. This rack has a 500lb weight capacity and works with skis, snowboards, canoes, kayaks, surfboards, and other recreational gear. Each cross bar has a channel to accept different accessories like load stops Item #A4000880 and tie downs Item #A4000882. The rear...
    view full answer...

  • Do I Need Anything Else to Mount My 2-Man Kayak on the Xporter Pro Ladder Rack on a 2002 Tacoma?
  • In addition to the Thule Xsporter Pro Truck Bed Ladder Rack - Aluminum - 450 lbs - Black # TH500XTB for your 2002 Toyota Tacoma, you will need a kayak carrier to attach to the crossbars. For a great recommendation, I suggest the Thule Hull-A-Port Kayak Carrier w/Tie-Downs - J-Style # TH834 with the Watersports Adapter # THXADAPT11. The Hull-A-Port will fit kayak with hull width up to 36 inches. The Xsporter's crossbars are too large for the Hull-A-Port to wrap around which is why you need...
    view full answer...

  • Recommended Truck Bed Ladder Rack To Install Roof Top Tent Onto 2019 Nissan Titan Pro 4X
  • It looks like you were interested in the Thule Xsporter Pro Adjustable-Height Truck Bed Ladder Rack 450 lbs - Black # TH500XTB. This fits the 2019 Nissan Titan with 5-1/2', 6-1/2', and 8' bed without the Utili-Track System. There are no sidebar rails compatible with this ladder rack. If you do not have the Utili-Track System then I recommend going with the Yakima Overhaul HD Truck Bed Ladder Rack 500 lbs 68" # Y01151-58 or 78" version # Y01151-59. SideBar Rails # Y01153 can be added which...
    view full answer...

  • Are the Uprights on the Adarac Pro Series # A64RR Adjustable?
  • Yes, the ladder bases on the Adarac Pro Series Custom Truck Bed Ladder Rack # A64RR have a sliding capability.
    view full answer...

  • 2021 Ford F-150 Thule Tracrac and BAK Revolver X4s Truck Bed Cover Combo
  • We have yet to get a video for your 2021 Ford F150, but the BAKFlip X4s # BAK56ZR will leave the stake pockets open which would be great for ladder racks. This would work well with the Thule TracRac SR # TH43002XT-508. Both of these products are confirmed to fit your 2021 Ford F150, I just don't have a video for you of that specific year, but no worries it will fit!
    view full answer...

  • Will the Buyers Products Van Ladder Rack Fit on a 2017 GMC Savannah 2500?
  • Yes, our installation team here at etrailer have confirmed that the Buyers Products Van Ladder Rack - 3 Bar - Steel - White - 600 lbs # 3371501310-3 will fit on your 2500 model 2017 GMC Savana Van.
    view full answer...

  • Ladder Rack for my 2020 GMC Sierra with the Carbon Pro Bed.
  • I have checked around and there does not seem to be any information out there in regards to any special treatment of the Carbon Pro beds. Confirm this in your owners manual to make sure there are no special notes about the Carbon Pro bed. With that said the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack part # Y01151-58 is a really nice looking and solid rack. Check out the video on it I have linked to see some additional details on it. I notice that you had also looked at the...
    view full answer...

  • Best Ladder Rack to Fit with BAKFlip MX4 Tonneau Cover on 2020 Ford F-350
  • The best ladder rack for you to use with the BAKFlip MX4 on your 2020 Ford F-350 is the Adarac Pro Ladder Rack, part # A4000952 for short bed or # A4000958 for long bed, because the legs for the ladder rack sit upright so that you can open and close your BAKFlip MX4 without having to make any adjustments to the ladder rack. The Adarac Pro is made of aluminum so it will withstand the elements much better than other options plus it have the ability to slide along the base rails to accommodate...
    view full answer...

  • Crossbar Setup to fit Retrax PowerTrax Pro XR with T-Slots of 2020 Ford F-350 Short Bed
  • The Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter # Y01152-5855 is the best option to fit the channels of the Retrax Pro Tonneau covers like the part # RTT-80383 that fits your 2020 Ford F-350 Super Duty Short Bed. This is a high quality aero shaped crossbar setup that's easy to install and use while also was made to fit your t-slots.
    view full answer...

  • Can I Use Thule TracRac Pro2 From Toyota Tacoma On Chevy Silverado
  • I contacted Thule and the TracRac Pro 2 racks are vehicle specific so you would not be able to switch it over to the 2015 Chevy Silverado 2500 unfortunately. The TracRac models have some versatility with various vehicles but this particular rack does not according to Thule. If you want to replace the rack with the T-Rac Pro2 Truck Bed Ladder Rack for Full-Size Pickups for a 2015 Chevy Silverado 2500 it is part # TH37002XT. If you need a ladder rack that is a bit more cost effective I...
    view full answer...

  • Ladder Rack For Pace Edwards UltraGroove Tonneau Cover on Ram 3500 Short Bed Without Ram Box
  • There is indeed a ladder rack made for the UltraGroove tonneau cover that fits your 2021 Ram 3500 short bed without Ram Boxes; the correct fit for the cover as well as the rack for your truck are the following: - Pace Edwards UltraGroove Retractable Hard Tonneau Cover # 311-KRD7833 - EL200 Ladder Rack for Pace Edwards UltraGroove Tonneau Covers - Dodge # 311-ELD0101 This will give you one of the nicest, most functional cover and rack systems you can get, with the UltraGroove being...
    view full answer...