Filter Questions and Answers:

reset filter

Expert Answers about RV Vents and Fans


  • Can MaxxFan Deluxe Roof Vent Be Installed on Mini Van
  • You could technically install the MaxxFan Deluxe Roof Vent # MA00-07500K in the roof of your mini van.That being said, the main issue is going to be the mini van's roof thickness. Since the roofs on vehicles are significantly thinner than those found on RVs or trailers, the vent assembly will stick down several inches from the roof/ceiling, limiting your overhead space. A much better option to add a roof vent to your mini van would be the MaxxFan Dome Roof Vent w/ 12V Fan # MA00-03812B....
    view full answer...

  • Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover that Fits Fan Model 810034
  • All three of the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Covers you mentioned fit over all Fan-Tastic Vent trailer roof vents as well as many other standard and high-powered roof vents that require a 14-1/4" x 14-1/4" opening in the roof, like your model 810034. The main difference is the mounting hardware that's included. Ultra Breeze cover # FVU1400GRS uses rivets to attach to the molded pegs of certain Fan-Tastic Vent fans (model numbers start with DF), while # FVU1500BL and...
    view full answer...

  • Replacement Circuit Board for MaxxFan Roof Vent 5100K
  • For your MaxxFan RV roof vent part # MA00-05100K the correct replacement circuit board is the # MA10A21276K.
    view full answer...

  • Supplies Needed to Install Replacement Ceiling Vent
  • The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-06200K will install in the exact same cutout as the stock vent. You will simply need some sealant and screws. Many will choose to use the Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White # 344270KITW. You don't absolutely need both butyl tape and sealant, so many will use the LaSalle Bristol XTRM Universal Self-Leveling Sealant - White - Qty 1 # 34427034145-1 or # 0160297 and then the Zinc Sheet Metal Screw...
    view full answer...

  • White Ceiling Garnish Trim 10-20211 for MaxxFan 6200K
  • We do have the ceiling garnish you are looking for that fits your MaxxFan Deluxe Roof Vent # MA00-06200K. What you need is the part you mentioned, the Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent - White # MA54FR. We assign our own part numbers, but this is the exact 10-20211 garnish you were asking about.
    view full answer...

  • Difference Between The MaxxAir FanMate Cover MA00-955003 and MaxxAir II RV Cover MA00-933075
  • The MaxxAir Vent Covers part # MA00-933075 and part # MA00-955003 both are just used to cover the vent to protect it from the elements. However, the MaxxAir FanMate part # MA00-955003 is designed for the high power fan models because it does allow almost complete air flow. The vent cover is taller so it allows the fan to open almost completely and restricts only 5% of the air flow. The FanMate RV Vent Cover can be used on a standard fan as well but if you have a high powered fan this is...
    view full answer...

  • Differences Between Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Covers FVU1400GRS and FVU1500G
  • The difference between the Fan-Tastic Vent vent covers # FVU1400GRS and # FVU1500GR is in the models of vent that each one will fit, as you noted. Part # FVU1400GRS fits all Fan-Tastic Vent trailer roof vents with model numbers starting with "DF". Part # FVU1500GR fits all Fan-Tastic Vent trailer roof vents with model number starting with "FA" or "FV". You certainly can use your own preferred installation hardware. Both vent covers will also work with standard and powered vents from...
    view full answer...

  • Picking Out Replacement Roof Vent Lid for Ventline: AS-13 M VA446-1
  • Thank you for providing the replacement vent lid part number VA530. This was indeed once a valid part that is now obsolete, but we can still help you select a replacement vent lid. Please refer to the linked photo showing the different hinge styles on the replacement lids we offer. We have 3-point, 4-point and continuous hinge type replacement lids. Just match up your hinge type and then on the linked page click on the filters to choose your hinge type and preferred lid color. For...
    view full answer...

  • Solution to Replace Remote on Fan-Tastic Vent 6600R-417 Without Replacing Entire Unit
  • I do have a solution for you that doesn't involve replacing your entire unit, but the Fan-Tastic Vent Roof Vent # FV803350, does not have a receiver built into it, so it doesn't have the option to operate through a remote. Therefore, using its replacements parts get you what you need. Take a look at the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807359. This has everything you need (includes remote) to basically replace the "guts" of your Fan-Tastic Vent 6600R-417 unit and upgrade...
    view full answer...

  • Six Button Wall Mount Control for MaxxFan Deluxe 00-07500K
  • The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-07500K is not compatible with the old 4 key wall control. It will work with the 2 Key control or the 6 key wall control only as outlined in the attached instructions. We do have that 6 key wall control and it is part # MA59FR.
    view full answer...

  • Roof Vent With Reversible Fan
  • Yes, there are several roof vents that exhaust air out and pull air in. Fortunately most roof vents use standard mounting hole dimensions of 14" x 14". One of my favorite is the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-06200K. It has 10 speeds to increase or decrease the air flow and fan speed. It can pull fresh air into the trailer, or exhaust the stale air out. When the lid is closed and the fan is on, it acts like a ceiling fan and circulates the air quite well....
    view full answer...

  • MaxxFan 2016 Keystone Montana Model 3710FL Won't Stop Running
  • If your MaxxFan with the rain sensor, like part # MA00-04500K, starts operating automatically and the controller or the controls on the unit aren't working then that sounds like a bad circuit board or that the built-in safety feature for too much (or not enough) voltage was activated and the circuit board locked up. Since you already removed power from the vent try connecting it back to power. If it works properly then it was just locked up and needed to be disconnected from power to unlock...
    view full answer...

  • 2-Piece Polypropylene Trailer Vent for 3 Diameter Hole - Black HMAV2-AVT2 Installation Guide
  • For the 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole - Black Item # HMAV2-AVT2 I have sent in an update to resolve the pricing issue, but yes the if you order the HMAV2 and the AVT2 separately you will still receive the same parts that are in the bundle. Turning the vent slots forward would allow for more airflow when pulling the trailer but will also cause more drag and incase the likely-hood of water getting inside the vent and damaging the walls of your trailer so best practice...
    view full answer...

  • Will The Motor On My Auto Open Vent Wear Out When The Lid Hits The Vent Cover And Runs A Few Seconds
  • Having Item # FVU1500WH on your vent is a great idea and I always recommend it when I do install videos on vents. You have also just pointed something out that I need to start making everyone aware of when I do the install videos so I thank you for that. The auto open and close feature on the vent actually doesn't have a limit whether it is opening or closing and you probably didn't notice it. The motor actually runs a few extra seconds after reaching the limit and then amps out. With a...
    view full answer...

  • Parts Needed To Install MaxxAir MaxxFan Plus Roof Vent As New Install
  • The MaxxAir MaxxFan Plus Roof Vent part # MA00-04751KSX is designed to replace an existing roof vent fan. Therefore, it does not come with everything needed for installation. The extra items you will need are as follows: Key Wall Control part # MA00A03550K Ceiling Garnish part # MA54FR RJ11 Communication Cable part # 34279523 Roof Vent Installation Kit part # 344270KITW
    view full answer...

  • Recommended Roof Vent Covers for a Trailer with Automatic Open Roof Vent
  • The best roof vents we offer for your trailer are going to be the MaxxAir FanMate RV and Trailer Roof Vent Covers part # MA00-955002 for black, part # MA00-955003 for smoke, or part # MA00-955001 for white. The reason for this is because they have the tallest inside clearance measurements of 9-1/2". These will work just fine for your two standard roof vents but for the electric open roof vent, you will need to take a bit of caution. Judging from the photo it looks like it might not...
    view full answer...

  • Recommended Vent Fan for Cargo Van with Reversible Motor
  • In order for a vent fan to have both an intake and exhaust feature it will need to have a reversible motor. The MaxxAir Mini Deluxe Trailer Roof Vents like part # MA00-03801 for white or part # MA00-03851 for black don't have reversible motors. Instead, I recommend the Fan-Tastic Vent Roof Vent part # FV801250. In regards to installation which will apply to pretty much all roof vents, the roof thickness will need to be at least an 1". That said, if you have a thin metal roof like in...
    view full answer...

  • Why Can't MaxxFan Deluxe Roof Vent w/ 12V Fan be Installed Above Tub/Shower
  • While we have heard of people using electrical vents like the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-06401K above a tub/shower, it is not meant to be installed in that location because water from the shower (whether it is from steam or from someone dancing around while singing in the shower) can harm the electrical components and cause the vent to fail. This is the same reason why you shouldn't use this above a range cooking surface either. If you like the idea of having a rain cover...
    view full answer...

  • Replacement Lid for Venline/Northern Breeze RV Roof Vent
  • So you're needing a smoke colored vent lid like # FVK1020-19, but with a different hinge, is that correct? Most of the Ventline/Northern Breeze fans used a continuous hinge, like what's seen on the # BBC-0530-04. I've provided a photo showing a close-up view of the hinge.
    view full answer...

  • Replacement Cover for Trailer Roof Vent AS-13 M-VD0449
  • We have actually spoken with Ventline regarding your model AS-13 M-VD0449 in the past and they have confirmed that the correct replacement cover is the part # BVD0449-A03 in Smoke or # BVD0449-A01 in White. The cover measures 14 inches x 14 inches and is designed for a continuous hinge. I have attached a couple short video reviews on these covers that you can check out as well.
    view full answer...

  • Troubleshooting MaxxFan Not Opening on 2017 Grand Design Reflection
  • It looks like you have the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan - Powered Lift - 4 Speed - White # MA00-04751KSX. The unit sounds like it is malfunctioning and this could be due to the rain sensor # MA34FR. It sounds to me like the sensor is seeing moisture whether there or not and keeping the power lid from opening. I recommend unplugging the rain sensor and seeing if all the other functions work. If so, then simply replace that sensor. If the other features still do not work,...
    view full answer...

  • Will 14" x 14" Roof Vent Fit a 2015 Lance 1052 Camper with 14-1/4" x 14-1/4" Roof Opening
  • You will definitely be able to install the MaxxAir MaxxFan Plus Roof Vent w/ 12V Fan # MA00-04751KSX on your 2015 Lance 1052 truck camper just fine. Basically anybody that measures 14" or 14-1/4" for a vent has the same vent dimensions. People will measure either the opening on the inside or outside, the lid, or even just the opening in their roof which is where the slight differences come into play. If you measured 14-1/4" then the MaxxAir vents will fit like a glove. Please note that...
    view full answer...

  • How to Connect Wall Control Panel # MA59FR to the MaxxFan Deluxe Roof Vent # MA00-07000K
  • In order to connect the Wall Control Panel # MA59FR to your MaxxFan Deluxe Roof Vent # MA00-07000K, you need the MaxxAir RV Wall Control Communication Cable # MA69FR. This part is not included with the roof vent or the wall control panel, so you will have to get that part separately. Check out the videos linked below for more details.
    view full answer...

  • Does the MaxxAir Mini Deluxe Trailer Roof Vent MA00-03851 Have A Wall Switch
  • If you need a powered roof vent fan that has a control panel that you can mount on the wall then I recommend using the Ventline Ventadome Roof Vent w/12V Fan and Wall Switch part # V2119-3-533. The controls for the MaxxAir Mini Deluxe Trailer Roof Vent part # MA00-03851 are on the unit itself and there is not a wall mount for this fan so I don't think it would be a good option for what you are looking for but the above will do what you need. The Ventline Ventadome has a 12 volt fan, powered...
    view full answer...

  • Can I Replace Operator Mechanism Of MaxxFan From Inside The Trailer
  • No, the whole fan assembly like part # MA00-04500K would need to be removed from the roof, leaving the inner frame. Then the unit would need to be disassembled to get the operator mechanism to replace it with part # MA10-20281K-1AF. I have attached an exploded diagram that shows the pieces of a MaxxAir Fan for your reference.
    view full answer...

  • Motor On MaxxAir MaxxFan 4900K Roof Vent Will Not Shut Off When Lid Is Closed
  • I spoke with MaxxAir about the issues you are having with your MaxxAir MaxxFan Roof Vent and they informed me that the gears inside the lift motor have gone bad so you will need to replace this with the Replacement Lift Motor for Maxx Fan Plus Roof Vent part # MA10-20270. I was also able to confirm that the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents part # MA10-20281K-1AF is correct for you so that is not the issue.
    view full answer...

  • What is the CFM Rating for the MaxxAir Mini Deluxe Trailer Roof Vents
  • The CFM for the MaxxAir Mini Deluxe Trailer Roof Vent # MA00-03801 is 200. I reached out to my contact at MaxxAir who confirmed this for me.
    view full answer...

  • Replacement 14 x 14 Trailer Roof Vents and Installation Kit
  • Standard square RV roof vents usually measure 14 x 14-inches and typically the roof opening measures very slightly larger than this, about 14-1/4 x 14-1/4. The Ventline vent # V2092SP-28 that you referenced is this 14 x 14-inch size. If your existing roof openings measure 14 x 14 then this vent or any of the similar units we offer will fit well. This particular vent includes a garnish (the interior plastic trim piece that covers the gap between the vent and the roof) which will work...
    view full answer...

  • Bathroom Exhaust Fan With a Light for RV
  • There are two exhaust fans with a light that may work for you, depending on the size of the cutout that your old fan used: - MaxxFan Dome Plus Roof Vent with 12V Fan - LED Light - 6" Diameter - Manual Lift - White # MA00-03810W - MaxxFan Dome Plus Roof Vent with 12V Fan - LED Light - 6" Diameter - Manual Lift - Black # MA00-03810B These fans fit roofs that are between 1" and 6" thick, and require a 6-1/4" diameter opening to work. They do come with the hardware needed for install,...
    view full answer...

  • What Is The Difference Between MaxxAir MaxxFan Standard Roof Vent and Mini Roof Vent
  • The difference between the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K and the MaxxAir MaxxFan Mini Roof Vent # MA00-04301M is the height of the fan and the roof thickness they will fit. The mini roof vent extends 2-7/8" above roof when closed while the standard Maxxfan Roof Vent extends 4-1/4" above the roof when closed. The mini roof vent also fits roofs 1" - 6-1/2" thick while the standard fits roofs 2" - 6-1/2" thick. Both models have a 4 speed option, manual lift and fit 14W X 14L...
    view full answer...

  • Is This Fan Reversible?
  • The MaxxAir # MA00-04301M fan that you referenced is not reversible. It exhausts air only. However, the Fan-Tastic Roof Vent # FV802250 is reversible and has three speed levels and a tinted vent cover. If you don't already have one, most users install a Fan-Tastic # FVU1500BL (in black) vent cover so the vent can be open in light to moderate rain. Use # FVU1500WH for white.
    view full answer...

  • Should Vent Stay Open on Spaceport Adjustable A/C Ceiling Vent
  • First of all, I greatly enjoyed the phrase "cat fuzz" - that was awesome. Sorry to hear about the trouble you are having with the Spaceport Adjustable A/C Ceiling Vent - 3-13/16" - White # A10-3357VP although there isn't a method that is used for the slats to stay open, because they should simply do so on their own, as you can see at about the 1:30 mark of the linked video review of this product. It sounds like yours is not functioning properly, so you can replace it with another. If...
    view full answer...

  • Roof Thickness Requirement To Install Ventline Vanair Trailer Roof Vent On Enclosed Cargo Trailer
  • The Ventline Vanair Trailer Roof Vent w/ 12V Fan vent part # VP-543SP is designed for roof 1-1/2" to 2-1/2" thick. The vent is designed for enclosed trailers so you shouldn't have an issue installing it on your aluminum roof as long as it's 1-1/2" thick. It also requires a 6-1/4" Diameter cut out and a 12V power source. A lot of customers use these vents on truck bed campers and aluminum enclosed trailers with thinner roofs. I recommend to also take a look at the attached video that includes...
    view full answer...

  • Replacement Lift Operator and Lift Arm for MaxxFan Deluxe Roof Vent MA00-05100K
  • If you have the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat # MA00-05100K then the Manual Lift Operator # MA10-20281K-3CF and the Replacement Lift Arm # MA10-20222KS is what you need.
    view full answer...

  • Low Profile Roof Vent Recommendation for Camper
  • The lowest profile roof vent we have that has a fan built into it was the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K which when closed sticks up 4-1/4 inches from the roof it's installed on. (edit: now the lowest profile is the part # MA00-04301M which sticks up 2-7/8 inches). You'd have to measure to be sure that would fit under your roof rack or not.
    view full answer...

  • Replacement Ceiling Garnish and Gasket for Fan-Tastic Vent Model 2000RDMS
  • Your Fan-Tastic Vent model 2000RDMS is a standard 14 x 14-inch RV roof vent and you can select an interior ceiling garnish trim ring from the linked page. We have white and off-white garnishes in various depths, and this depth is called the leg length. For instance, part # FVK2040-80 is an off-white garnish with a 4-1/2-inch leg length and we have models with longer leg length too. You can easily trim these down to a shallower depth using tin snips # PT79ZR or a small rotary cutting tool...
    view full answer...

  • Roof Thickness Needed & How Far Does Handle Protrude Below Roof of MaxxFan Dome Plus Roof Vent
  • In regards tot he roof thickness, the MaxxFan Dome Plus vent does require a 1 inch thick roof at the minimum. So you would need to build up the roof of your camper where the vent installs to have at least 1 inch of thickness. In regards to the handle, I reached out to MaxxAir, and they told me the handle will protrude below the roof 3.08 inches when you have the vent closed and 2.14 inches when the vent is open, as you can see by the accompanying diagram. This vent is available in...
    view full answer...

  • Trobleshooting Lid Lift Function on Maxxair 7500 Fan
  • Since the lid motor on your MaxxAir 7500 vent with powered lift # MA00-07500K is operating but the lid stops midway unless you give it some manual assistance the issue is either power-related or the result of a damaged operator mechanism # MA10-20281K-1AF. My tech contact at MaxxAir said that the behavior you describe is often related to low available input power. The vent will detect if the incoming operating voltage is low or marginal and it will stop the lid opening. This is a safety...
    view full answer...

  • Replacement Vent Lift Motor For Fan-tastic Vent Roof Vent
  • I noticed that you've been a long time customer- so thank you for your repeat business! It looks like you recently purchased the Replacement Housing Unit for Fan-Tastic Vent Lift Motor # FVK6035-80 and if I'm understanding you correctly, you now need the actual replacement motor? The replacement motor unit that works with that housing is the Replacement Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts # FVK6050-80 . If you're actually looking to replace the entire...
    view full answer...

  • Difference Between Fan-Tastic Trailer Roof Vent Covers
  • I believe you were referencing the Fan-Tastic Trailer Roof Vent Covers, though there isn't a 1600 model I was able to reference. There are 1400 and 1500 models, and the difference between them is just what they fit. The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1400GRS fits all Fan-Tastic Vent trailer roof vents with model numbers starting with "DF" while Vent Cover # FVU1500GR fits all Fan-Tastic Vent trailer roof vents with model number starting with "FA" or "FV". The...
    view full answer...

  • Remote and Wall Mount for MaxxFan Deluxe Model 5100K Roof Vent
  • The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White # MA00-05100K does not come with a wall switch, but the Replacement Handheld Remote for Maxxair Roof Vent Intake/Exhaust Fans - Qty 1 # MA00A01150K will work with it. Keep in mind this does not have the power lift. If you want the power lift, Then the MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - White # MA00-07000K is what you want which comes with the...
    view full answer...

  • Replacement Vent Lid for Ventline AS-13M RV Roof Vent
  • We do offer replacement lids for the Northern Breeze/Ventline AS-13M. You'd want to go with # BV0554-01 for white or # BV0554-03 for smoke.
    view full answer...

  • Replacement Vent Cover for 2018 Grand Design 2600RB
  • You can replace the plastic roof vent covers on your 2018 Grand Design 2600RB and not have to worry about replacing the entire assembly with something like the Ventline # V2092SP-29. To choose the correct replacement, you'll need to determine which type of hinge you have to attach the vent cover as well as the size of the vent; the industry standard vent is 14" x 14", so you'll want to measure to make sure that your roof vent is around that size (some will be 14-1/2" x 14-1/2", but...
    view full answer...

  • Roof Vent Cover for 1998 Haulmark Trailer
  • Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer. In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also need to know the type of hinge you need. There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on...
    view full answer...

  • Comparing MaxxAir II and MaxxAir FanMate Roof Vent Covers
  • Aside from the MaxxAir II having inside dimensions of 21-1/2" long x 18-1/2" wide x 6" tall and the FanMate having inside dimensions of 26-1/2" long x 16-3/4" wide x 9-1/2" tall, the MaxxAir II comes with a bug screen but only 2 of the 4 mounting points use clips that can easily be removed. The FanMate doesn't come with a bug screen (but one can be added with part # MA00-955202 Black or # MA00-955203 Smoke) and it comes with 4 easily removable clips. I have attached video reviews for both...
    view full answer...

  • Smoked Lid for MaxxFan Plus Roof Vent # MA00-04000K
  • We do have a smoked lid that fits the MaxxFan part # MA00-04000K that you have as the part number # MA10A40009K which will bolt right up easily and allow more light through.
    view full answer...

  • How High does the MaxxAir MaxxFan Plus Roof Vent part # MA00-04751KSX Stick up off the Roof?
  • The MaxxAir MaxxFan Plus Roof Vent part # MA00-04751KSX will be 3.25 inches over the roof line of your trailer when installed. To ensure proper installation I recommend using the Roof Vent Installation Kit part # 344270KITW. This will have all of the sealant and screws that you will need to make your vent water tight and ready for use after just a short drying period. I linked a video showing an installation.
    view full answer...

  • Replacement Circuit Board for MaxxAir Model 4751KSV05 Powered Vent Fan
  • I reached out to my contact at MaxxAir and she said that the correct printed circuit board for your MaxxAir model 4751KSV05 powered vent fan is the part # MA10A04751KS.
    view full answer...

  • Maxxair Maxxfan 4951KS 4 Button Wall Controller Causing Functions To Work Opposite Or Not At All
  • If your MAxxair fan 4951ks is new there have been a few instances with the RJ11 cable that runs between the controller and the fan circuit board causing the functions to run opposite. This could mean the cable is a standard cable and may be wired different. I suggest replacing the cable first. If the fan is not new and the new cable doesn't fix the issue I suggest replacing the circuit board with the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents Item # MA10A04751KS
    view full answer...

  • What Is The Difference Between The Fan-Tastic Roof Vents FV801250 and FV801350
  • You have asked a great question. The difference between Fan-Tastic Vent Roof Vent part # FV801250 and Fan-Tastic Vent Roof Vent part # FV801350 is the garnish. The garnish (or base) that comes with the vent part # FV801250 is 4 inches thick compared to the garnish (or base) that comes with the vent part # FV801350 is a low profile 1-1/2 inches thick. The FV801250 fits trailers roofs up to 4 inches thick and FV801350 is better for thin roofs like enclosed trailers with thin metal roofs....
    view full answer...

  • How To Find the Correct Replacement Lid for a Vent Fan on a 2018 Forest River Cedar Creek 8289WS
  • If you remove the screen on your vent assembly there should be both a brand and model number listed. If you can provide this then I can give you the correct replacement lid. If not your only other option would be to remove the vent lid you have now and pay attention to the hinge. If it is a continuous hinge like the photo I have attached for you then you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03. The Replacement Lid for MaxxFan and...
    view full answer...

  • High Volume Roof Fan and Vent Cover
  • Since you want to move a lot of air and you want a cover for your fan I recommend the MaxxFan # MA00-06401K that combines both the fan and cover in one product. The cover design is probably the best for keeping rain out. I think this full size fan will probably more more air than the low-profile "mini" that you mentioned. When you remove your old fan and install this one, use the Alpha Systems # AL48FJ butyl tape between the new fan and the roof, then the Alpha Systems # AL98KV Self-Leveling...
    view full answer...

  • Color Difference Between A10-3360VP and A10-3359VP
  • The light beige Valterra Adjustable A/C Ceiling Register part # A10-3360VP has more of a pale brown tone to it then the Valterra Adjustable A/C Ceiling Register medium white part # A10-3359VP. If you would like more of a light brown color, I recommend the light beige if you wanted a darker white tone I recommend the medium white. I recommend to take a look at the two videos I have attached because they depict their true colors.
    view full answer...

  • Replacement Motor For Fan-Tastic Roof Vent With Model B2000RBT Motor
  • The model number B2000RBT that you mentioned is the motor model number for the Fan-Tastic Roof Vent. If the fan only runs for a few minutes it sounds more likely that the fan motor is going out. First, it is a good idea to make sure you are getting adequate power to the fan. Check for any loose wiring and make sure you have a proper ground connection. I think your issue has to do with power to the motor or the motor itself because it is a common issue. If you check your wiring and everything...
    view full answer...

  • Vent Cover For MaxxFan Roof Vent 4301K
  • This cover will fit. The MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955001 is designed to fit all of the 4000 Series MaxxAir Fans with 4 mounting tabs, including your MaxxFan Roof Vent w/ 12V Fan 4301K # MA00A04301K
    view full answer...

  • Difference Between Fan-Tastic FVU1400GRS and FVU1500GR Fan-Tastic Vent Covers
  • The only difference is the roof vent models that each cover fits. The Fan-Tastic # FVU1500GR is meant to bolt right up to Fan-Tastic vents with part numbers beginning with "FA" or "FV". The # FVU1400GRS is meant for model number fans beginning with "DF". Either can be used with a standard sized 14-1/4 by 14-1/4 vent by either screwing it into the side of the vent or by using existing screws. The Camco # CAM40453 is more of a universal fit item, and wouldn't take advantage of the mounting...
    view full answer...

  • Will Vent Cover Allow Vent To Open 100%?
  • This is a common question about this (and other) vent covers. None of the covers are tall enough for a vent lid to open 100%. However, most, including the Fan-Tastic # FVU1500WH, will open most of the way and allow 100% of air flow produced by the fan. The tallest vent cover we offer is the MaxxAir # MA00-955001 in white, or # MA00-955002 in black. You might also consider the MaxxFan Deluxe Roof Vent w/ 12V Fan part # MA00-07000K which is a fan with a built in cover. It's downward...
    view full answer...

  • Could Metal Roof Vent Lid Fit on Trailer Roof Vent
  • We have a metal lid that will fit as a replacement for what you have with the part # BV0534-00. This would be the most durable option that would hold up much better than plastic.
    view full answer...

  • Replacement Dome Lid for Fan-Tastic Roof Vent
  • This is the Lid Style that most all of the powered Fan-Tastic roof vent fans use. If your Fan-Tastic fan has the lift track on the side and the same piano style hinge of the Replacement Dome # FVK1020-19 than this is the right one for you. There is also a White Replacement Dome # FVK1020-81 if you want to keep out more of the sunlight. You can also install a Fan-Tastic Vent Ultra Breeze Cover # FVU1400GRS that is made of a much more durable material. It is a great option to allow...
    view full answer...

  • Maxxfan Deluxe Roof Vent Replacement Key Wall Control
  • The Replacement Key Wall Control For MaxxFan Plus and Deluxe # MA00A03550K replaces the MaxXFan Deluxe (8751K or 8951K) and should work just fine for you. Included is a video overview of this solution.
    view full answer...

  • Troubleshooting MaxxFan Plus Roof Vent
  • According to the manufacturer's instructions three beeps and a green light on the MaxxFan Plus Roof Vent # MA00-04000K indicates you have entered Auto Mode so that all seems normal. However, if the light is on but the fan has stopped working that is most likely a sign that the circuit board has failed and needs to be replaced. For MaxxAir model 4000K you'd want to use Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents # MA10A21276K.
    view full answer...

  • Replacement Lid for MaxxFan and MaxxFan Plus Roof Vent 4951KS
  • Yes, the correct replacement lid cover for your MaxxFan Plus Roof Vent w/ 12V Fan part # MA00-04500K (4951KS) is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part # MA10A40009K.
    view full answer...

  • Reading Lamp Recommendation for Small Teardrop Camper
  • For a reading lamp, I'd recommend the Command Electronics # CE46FR. The light provided comes in at 3500 Kelvin on the Kelvin lighting scale and is described as 'warm white' which is suitable for the situations where you don't want something really bright like task lighting. For cards and reading, I believe the # CE46FR would be perfect for you. Even cooler is the fact that the lamp offers a USB port for charging your phone or e-reader and a dim night light so you can easily find the switch...
    view full answer...

  • Bug Screen for Fan-Tastic Vent Ultra Breeze Roof Vent Cover
  • Yes, we do have the bug screen available for your Fan-Tastic Vent Ultra Breeze Roof Vent Cover # FVU1400GRS with part # FVU1550BL for Black or # FVU1550WH for White. I have attached a couple short video reviews that you can check out as well.
    view full answer...

  • Why Would Trailer Roof Vent Leak Water
  • If your Fan-Tastic Roof Vent is leaking it's going to be a sealant issue between the vent assembly and the roof of the trailer. So you'd need to have the base of the vent resealed to the roof with sealant like the part # 34427034145-1 and that will take care of the leaking issue. Where is the red blinking light exactly? Does the vent still seem to work like normal?
    view full answer...

  • Replacement Printed Circuit Board for MaxxFan Model 6200K
  • The replacement printed circuit board you're looking for can be found with part # MA10A21276K, which is designed to work with the # MA00-04000K, # MA00-05100K, and # MA00-06200K. .
    view full answer...

  • Troubleshooting MaxxFan MA00-07500K Deluxe Foof Vent Fan
  • I spoke with the folks at Airexcel, who ran through a few different troubleshooting scenarios with me. As a first step, disconnect power to the fan for a few minutes, then reconnect power to reset the circuit board. If that fails to solve the problem, there are other things you can check. Can you operate the lid manually with the knob. If you cannot, it's an indication that either the mechanism is jammed or the lift motor is shorted out and needs replacing. A replacement lift motor is...
    view full answer...

  • Replacement Ventline Trailer Roof Vent With Screen VD0434
  • From my research the VD0434 model number is the screen for a Ventline roof vent. We carry two replacement lids for the Ventline roof vents. It is more than likely you need the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent part # BVD0449-A03 which has a plastic hinge that I have added a photo of. If your hinge is metal it is an older model, for that you will need Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03. I have added a photo...
    view full answer...

  • How To Replace Rain Shield On MaxxFan Deluxe Roof Vent
  • There are not specific instructions on how to replace the Replacement Rain Shield for MaxxFan Deluxe Roof Vent - Smoke part # MA05-30520 on the MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke part # MA00-06401K. However, replacement rain cover attaches to the white lid portion of the fan with the hinges I have pointed out in the photo. You will need 3/4" #10 screws or you can reuse the screws if they are not in bad shape. You want to line up the hinges with the existing...
    view full answer...

  • How to Determine Correct Replacement Lid for Trailer Vent
  • I can tell you how to determine the correct replacement lid for your trailer vent, though a trailer's VIN doesn't have any information regarding the vent, and replacement parts are not something almost any trailer manufacturer has because they are widely pieced together. The best option - if you can't find the part number of the vent to try and match a replacement to that - is for you is to refer to the accompanying photo I added, you can see that there are four types of hinges and what...
    view full answer...

  • Replacement Buttons, Operator, and Lift Motor for MaxxAir RV Roof Vent # 7000K
  • For your MaxxAir fan part # MA00-07000K we sell several replacement parts. For the buttons not working we offer the keypad part # MA10-21304K, for the lift motor # MA10-20270, and for the operator # MA10-20281K-1AF. With all three of these replacement parts you'd get your fan going again but it might just be as easy to replace the entire thing.
    view full answer...

  • Replacement Lid for Fan-Tastic Vent 6000a
  • Based on previous information the most likely vent lids that fit your Fan-Tastic Vent 6000A have hinges and measure nearly 15 inches from outside to outside, but there isn't any that are smoke in color, just tinted (which would be the closest to "smoke") and white: - Tinted: Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 - White: Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-81 I have added links to video reviews for you to check out as well. You...
    view full answer...

  • Vent to Replace 13 x 13 Roof Vent
  • Vents now are a standard 14" x 14" so there are no covers we can offer which will work with a 13" x 13" roof vent. I highly recommend enlarging your vent opening and switching to the standard 14" x 14" size to meet the size of today's vents in order to more easily - and less expensively - obtain replacement parts or a replacement at some point. For that, a budget-friendly option is the Ventline Ventadome Trailer Roof Vent # V2092SP-28. For installation you will need the Roof Vent Installation...
    view full answer...

  • Replacement Vent Cover For 16 Foot Wells Cargo Trailer
  • It looks like you have a standard 14-1/4 by 14-1/4 trailer roof vent but you would want to measure to be sure. The second step is to look at the hinge portion of your cover. It looks like you may have a metal continuous hinge but I have added examples for you to be sure. I recommend Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for a metal continuous hinge. I have added an installation video for your reference.
    view full answer...

  • Fan-Tastic RV Roof Vent Cover to Replace U1400BL
  • The correct replacement Roof Vent Cover would likely be the Fan-Tastic # FVU1400GRS for smoke or # FVU1500BL for black, but you'll want to check the model number of the existing vent. If the number ends with 'DF', this would be the correct tit that would attach to the mounts on your vent. I'll link you to an video showing how the cover installs. If the pins on the vent shown in the video match your existing vent, either cover would work for you.
    view full answer...

  • Replacement Lid Needed for Maxxair 4951 Vent on 2018 Grand Design
  • Thank you for all of the info! Based off of that, and another question a customer sent in of the Maxxair 4951 on their 2018 Grand Design Reflection, the roof vent that you have is the same as the MaxxFan Plus Roof Vent w/ 12V Fan # MA00-04500K so your replacement lid is either part # MA10A40002K in white or part # MA10A40009K in smoke. We don't have the clear lid but either of these will fit great with your MaxxAir.
    view full answer...

  • Solution for MaxxFan Roof Lid that Stopped Opening with Switch
  • Sounds like the lift motor needs to be replaced as it's no longer able to raise the vent lid. For that you'd want the part # MA10-20270. Since you are able to lift the lid manually it wouldn't be the operator. If this were the problem it would either make noise like you mentioned or wouldn't allow you to manually lift it.
    view full answer...

  • Troubleshooting Remote Not Working with MaxxFan Plus Roof Vent # MA00-04000K
  • If your MaxxFan Plus Roof Vent # MA00-04000K isn't responding at all to the remote then most likely it just needs to be replaced with part # MA00A01150K or the batteries are just in need of a change. I do also recommend verifying that you're able to adjust the speed settings and other controls by using the buttons on the vent itself to rule out the vent from being the issue. If you can't adjust anything using the vent buttons either then the remote is likely fine but a replacement...
    view full answer...

  • How to Remove Rotary Switch from Ventline Vanair Trailer Roof Vent
  • The switch design for the Ventline Vanair Trailer Roof Vent part # VP-543SP has since changed from the rotary style you have to the push button design referenced in the video. I called and spoke with an engineering contact at the Ventline division of Dexter Axle and they informed me that in order to remove the switch you need to trace the two wires up and remove them at the source rather than the switch. There is one wire that goes to the motor and the other goes to the rv's power circuit....
    view full answer...

  • Does Fan-Tastic Vent Upgrade Assembly 7350 Fit Fan-Tastic 1200 Series Vent
  • I have some good news for your wallet because I reached out to the manufacturer, Dometic, who told me you can upgrade your 1200 Series Fan-Tastic Vent Roof Vent # FV801200 with the Fan-Tastic Vent Roof Vent Assembly Upgrade Kit # FV807357 to get the same motorized assembly with remote that you would get with a whole new vent. In regards to the covers, the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # FVU1500WH (White) or # FVU1500BL (Black) are going to fit on top of your Airstream....
    view full answer...

  • Difference Between The MaxxAir FanMate Vent Cover And The MaxxAir II Vent Cover
  • The MaxxAir FanMate vent cover Item # MA00-955001 is going to be just a little taller but the louvred end tapers in and it does not come with the screen which is Item # MA00-955202. 25" long x 18-1/8" wide x 10-1/4" tall. The MaxxAir II Item # MA00-933072 is a more lower profile design, comes with the bug screen and the louvred end is straight up and down. 22-3/4" long x 18-1/2" wide x 9-3/8" tall Each is also available in black under Item # MA00-955002 and Item # MA00-933075.
    view full answer...

  • Replacement Roof Vent for 1992 Palomino Filly Pop-Up Camper
  • We have many types of trailer roof vents and vent parts but we do not have a way to look up the vent originally installed in your 1992 Palomino Filly so I suggest confirming the dimensions. Most often square roof vents are 14 x 14-inches and fit roof openings that are generally 14-1/4 x 14-1/4. Based on photos of your pop-up that I could find it appears you do have a 14 x 14 vent so I linked for you our entire range of trailer vents in this size. We have manual vents, 12V powered vents...
    view full answer...

  • Replacement Vent Cover for Hengs Model 122112 Roof Vent 90110 C1
  • I was able to find a picture of the part number 90110 C1 that you need and found that the exact replacement is the # BV0554-03 that you referenced. If you wanted white instead you'd want # BV0554-01.
    view full answer...

  • Troubleshooting Northern Breeze VentLline Dome Lid that Won't Open Automatically
  • The Replacement Gear Motor with Pinion Gear for Ventline Ventadome Trailer Roof Vent # BVB0601-00 or just the Replacement Plastic Gear for Ventline Ventadome Trailer Roof Vent - Dome Motor Gear # BVD0121-00 is what you need to lift the dome.
    view full answer...

  • Picking Out Roof Vent Lid for 2017 Heartland Wilderness
  • First thing we gotta do is identify the roof vent lid you need. Which to do that you need to look at the hinge setup of the vent and the shape of the lid. I attached a picture that has a few different common styles. If you can check the picture out and compare to the vent assembly on your trailer we can determine what you need and from there determine the install. I also attached a link to a page that has all of the vent lids we offer as well.
    view full answer...

  • Replacement Vent Cover for Vent With Continuous Metal Hinge
  • I did look up your order history (thank you!) and found that the last replacement lid you got from us was the Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Smoke - Wedge Shape # BVD0449-A03. That said, it looks like you want a replacement lid with a metal continuous hinge and we do carry those, the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01 and Smoke # BV0554-03, either of which will work for you. I've added links to...
    view full answer...

  • Replacement for MaxxAir # 4050K Roof Vent Fan
  • The MaxxFan # MA00A04401K would be a good replacement fan for most any camper. It fits a standard 14X14" opening and features 4-speed exhaust fan, manual lift design, removable bug screen and sealed motor. A new inside ceiling trim piece (garnish) is included. You may want to additionally consider adding the MaxxAir # MA00-955001 FanMate roof cover to help keep the rain out. Additionally, during installation you will need the Fastenal # 0160297 roof sealant.
    view full answer...

  • Maxxfan Wont Stop Running or Wont Start Working
  • Sorry you're having this issue. We have come across this from time to time and you will need the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents part # MA10A04751KS to fix your issue. It is a very easy installation and will get your MaxxAir fan back up and running properly. The connectors will match what you currently have and you'll need two butt connectors I recommend the Deka Heat Shrink Butt Connector - 16-14 Gauge part # DW05744-5 to make the connections to...
    view full answer...

  • Can I Install a Wall Switch on a MaxxAir MaxxFan Roof Vent
  • We've actually had this one asked before and have consulted with MaxxAir. Even though you can technically install the MaxxFan Deluxe Roof Vent # MA00-06401K wired to a separate switch, it is not recommended. The reason for this is that their fans are designed to have a constant 12V feed, and when an external switch is used there will be a short spike in voltage every time the switch is turned on, which over time could potentially cause issues with the circuit board on the vent. Additionally,...
    view full answer...

  • Replacement Continuous Hinge Vent Cover
  • Thanks for the photo and based on that it looks to me like you may have had a continuous hinge and would need the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White # BV0554-01, though you are going to want to confirm this is the hinge style you have. If not you can also go with the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001. As for the lift arm, for that you would need to know the manufacturer to get the correct one. For example, if you had a Fan-Tastic...
    view full answer...

  • Troubleshooting Maxxair Deluxe Fan That Starts and then Quits, Closes and Beeps Constantly
  • It sounds like a circuit board issue. I recommend the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents # MA10A21275K if you have a 4500K, 7000K, or 7500K model. If your model is a 4000K, 5100K, or 6200K then Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents # MA10A21276K is what you need.
    view full answer...

  • Metal Vent Cover Replacement for 2008 Pacific Coach Works Tango
  • The Replacement Dome Assembly for Ventline Ventadome Trailer Roof Vent - Flat, Mill Finish Metal # BV0534-00 will work with the dimensions you gave. If you have a continuous hinge, this is my recommendation for you. If you don't have a continuous hinge, then let me know which style you have comparing to the attached photo and we can see what options are available.
    view full answer...

  • How To Find the Correct Replacement Roof Vent Lid for a Palomino Puma
  • The best way to find the correct replacement vent lid for your 2018 Palomino Puma XLE Lite 30DBSC would be to remove the screen for the vent assembly and then read me the model number on the sticker. That said, the most popular design is one with a continuous hinge (see photo) with a center metal support bracket and if this is what you have you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03 for smoke or part # BV0554-01 for white.
    view full answer...

  • Replacement Roof Vent Lid for 13 Inch x 13 Inch Vent
  • The best way to find the correct replacement vent lid for your trailer would be to remove the screen for the vent assembly and then read me the model number on the sticker. That said, if this is an older trailer then that might not be possible. If that is the case then I would go with a universal option, the MaxxAir UniMaxx Universal Replacement Lid for RV part # MA00-335002 for smoke or part # MA00-335001 for white. These universal lids attach directly to the vent frame and will fit pretty...
    view full answer...

  • Replacement Lid for Heng's Roof Vent Model 122112
  • I found some photos of the Heng's Roof Vent 122112 online. Based on this, it looks the correct replacement for you should be the Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents part # BV0554-01 for white or part # BV0554-03 for black. In order to confirm this you would just need to make sure your roof vent has a continuous hinge (see photo). If you are not sure please just send me a photo of what you have and I will confirm. These covers are both 14-1/2" x 14-1/2".
    view full answer...

  • Replacement Trailer Roof Vent and Installation Kit
  • Most RV roof vents are the standard 14 x 14-inch size which is the size that replacement lid # BV0554-03 fits. We can help you with just a new lid if that is all you need and we can also supply a whole new vent assembly if you prefer. If you want to install a complete new 14 x 14 vent you can select one from the page I linked. We have manual vents without fans like # V2092SP-28 and both 12V DC-power vents like # MA00-07500K and 110V AC-power units like # V2128SP-01. At the top of the...
    view full answer...

  • What Size Wall Opening Does Ventline Range Hood # S0721-24GC-F-1 Normally Use
  • The dimensions that the Ventline Range Hood # S0721-24GC-F-1 normally uses for the wall opening is 10-1/2 by 3-3/4 inches. Most RV range vents would be set up for this but in case you need a damper to go along with the range we have the part # V2111-13.
    view full answer...

  • Does Interior Light Give Enough Power for the Solar-Power Plumbing Vent Fan # UF53-945001 to Run?
  • The Ultra-Fab Solar-Powered Plumbing Vent # UF53-945001 is a good option for applications needing a small amount of air displacement like RVs or motorhomes. According to my contact at Ultra-Fab, these will only work with sunlight and won't receive power from any type of interior lighting. Unfortunately, we don't have any other solar-powered options that would work for your application. You could use something like the MaxxFan # MA00-03812W, but this would need to be wired to a 12V power...
    view full answer...

  • Continental Cargo Trailer Roof Vent Lid Recommendation
  • Based on the number and picture you gave me I was able to determine that you have a Ventadome style roof vent from Ventline so the correct replacement lid is the part # BVD0449-A01.
    view full answer...

  • How To Determine If the Camco RV Refrigerator Vent Cover Fits My RV's Refrigerator Vent
  • Whether the Camco RV Refrigerator Vent Cover # CAM42163 will fit on your 1993 Forest River Sandpiper depends on what refrigerator vent you have. The Camco RV Refrigerator Vent Cover # CAM42163 fits Camco, Domestic, and newer Norcold bases. The intended base dimensions are 26" long x 7-1/2" wide. If this matches what you have on your Sandpiper then yes, this will work for you. For reference or if you need a new refrigerator vent the Camco RV Refrigerator Vent # CAM42164 works with...
    view full answer...