I believe what you are looking for is something like the Kuat Vagabond X # VX201 or Mini Skinny # MSR1B which come with 9-mm skewers already installed (see attached photo) since the Rhino-Rack XTray # RRRMCB03 requires a thru axle plus an adapter sleeve like # RRRBCA039. There isn't a way to use a quick release style of skewer with this basket. view full answer...
There are Retrax XRs for your 2020 Ford F-250 Super Duty which have rails that will allow you to install a rack system to carry four of the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103.
The correct Retrax XR tonneau cover will depend on the bed size of your 2020 Ford F-250; the Retrax One is for the short bed while the Retrax Pro is for the long bed.
- 6-3/4 Foot Bed: RetraxONE XR Hard Tonneau Cover with Trax Rails # RTT-60383
- 8 Foot Bed: RetraxPRO XR Hard Tonneau Cover... view full answer...
Thanks for the purchase and I'm happy to confirm that the Yakima HighRoad Roof Bike Rack # Y02114 is 100 percent compatible with the Rhino-Rack Roof Rack # RRVA126S-2, # RRRLKVA and # DK307 you have on your 2017 Ford Focus hatchback.
The HighRoad will clamp right onto the roof rack without issue, or you can use the SmarT-Slot Mounting Kit # Y02122 to mount the HighRoad directly to the channels of your Rhino-Rack crossbars. The only other thing I recommend is adding the Yakima Same Key... view full answer...
With most vehicles you have the choice of adding a hitch and then a bike carrier to that hitch, a trunk mounted bike rack, or a roof mounted bike carrier. I will provide you one of each and recommend what I think is best for your Tesla Model 3.
For a trunk mounted option, the SeaSucker Talon # 298-BT1004 is truly unique and is my recommendation. This rack mounts to your rear glass windshield via super strong vacuum cups. You won't have to be concerned with scratching the finish of... view full answer...
If your 2021 Ram 2500 has the 6-1/2' bed without RamBox then you will need to make sure you have one of the following models: RetraxONE XR # RTT-60232, PowertraxONE XR # RTT-70232, RetraxPRO XR # RTT-80232, or PowertraxPRO XR # RTT-90232. If your 2021 Ram 2500 has the 8' bed then you need RetraxPRO XR # RTT-80233. These are the Retrax bed cover models that have the T-slot top channel that will allow accessories to be mounted.
The bed covers listed above are all compatible with Yakima... view full answer...
I have a solution for you, but the Inno Tire Hold II Roof Bike Rack # INA389 can only hold a bike with a wheelbase of up to 48". I would not recommend using this carrier for a bike that has a wheelbase of 50". To verify the wheelbase of your bike, you can measure from the center of one wheel to the center of the next wheel and determine the distance as seen in the attached photo.
If your bike's wheelbase is in fact 50" then I would look into the Rhino-Rack Hybrid Roof Mounted Bike Rack... view full answer...
We have exactly what you are looking for using the Yakima JetStream Truck Bed Rack for Tonneau Covers part # Y00427-482104 will give you the cross rail system you are looking for. It provides everything you need to install this rack to your cover and will leave you with two 70" jetstream bars to connect your bike racks to.
As for the bike racks the Yakima HighRoad Roof Bike Rack part # Y02114 you looked at is an excellent choice. I really like the single tightening knob and the fact... view full answer...
The Rhino Rack X-Tray pro # RRRMCB03 is 41" wide and the center to center spacing on the bike mounts is 21-1/2" .
If you need new thru-axle adapters to fit specific bike axles, compatible axle adapters can be found below in some common sizes
15mm x 110mm # RRRBCA036
15mm x 150mm # RRRBCA037
20mm x 110mm # RRRBCA038
9mm x 135mm # RRRBCA039
15mm x 100mm # RRRBCA040 view full answer...
Both of the rooftop cargo baskets you mentioned are going to be well over the 16 inches you need, as you can see by the accompanying photo of the measurements I took.
The Yakima SkinnyWarrior Roof Rack Cargo Basket # Y07014 (58" long) and # Y07014-16 (74" long) is going to be over 18-1/2" from the outside rail to the clamp while the Kuat Mini Skinny Roof Cargo Basket # MSR1B (60" long) and # MSR1B-EXB (74" long) will have a similar measurement.
Since this isn't quite enough room for... view full answer...
Yes, the T-Track hardware included on the Thule UpRide Roof Bike Rack # TH599000 will let you install it properly in the top channels of Rhino-Rack's Vortex roof crossbars. On your 2012 Scion xB you'll want to order and install Rhino-Rack parts # RRVA137B-2, # RRRLKVA and # DK152 to complete your roof rack.
The Yakima FrontLoader # Y02103 and HighRoad # Y02114 bike carriers you referenced will also fit the roof rack but these will install by clamping around the bars. For the HighRoad... view full answer...
No need for adapters! The clamps on the Yakima ForkLift Roof Mounted Bike Rack # Y02098 can be adjusted to fit round, square, or aero bars.
The Yakima JetStream crossbars # Y00425 are a little large at 3-1/8" wide x 1" tall so it will be a tight fit. They are still within the maximum of 3-7/8" wide or 1-7/8" tall specs though that the ForkLift clamps can fit around. I suggest making sure your clamps are adjusted to the lowest notch. I attached a picture from the instructions to show... view full answer...
We do have the correct replacement end cap for the Yakima FrontLoader Bike Rack # Y02103, though it is difference than the part you mentioned. There are actually two possible end caps, depending on the age of your FrontLoader.
If your FrontLoader has a steel tray, the correct part is the Replacement End Cap for Yakima FrontLoader and ForkLift # Y8880188.
If your FrontLoader has an aluminum tray, you need the Replacement End Cap # Y80140. However, this end cap is only for FrontLoader's... view full answer...
I may have an option for you but the Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier part # RRRMCB03 does not have a 12mm thru axle sleeve that is compatible.
I recommend the Rola Atlas Roof Cargo Basket - Aluminum - 56" Long x 43-1/2" Wide x 4" Deep - 160 lbs part # 59043 which comes with 2- 1"x1" removable cross bars for you attach a clamp on style fork mount bike rack to. I recommend to use the RockyMounts StreetRod 12-mm and 15-mm Thru-Axle Adapter for Fork Mount Bike Racks... view full answer...
I would be happy to help you. The Yakima ForkLift Roof Mounted Bike Carrier item # Y02098 will work with square crossbars like your Rhino-Rack Heavy-Duty Roof Rack Crossbars item # RB1375B-2. The product page is correct you can not use the Rhino-Rack MountainTrail Rooftop Bike Carrier item # RBC035 with square bars. view full answer...
The Thule Wingbar Evo roof rack part numbers # TH711420, # TH710501, and # TH145043 that fits your 2022 Honda Civic sedan would work great with the Yakima Frontloader # Y02103 that you referenced as well. Yakima racks work great on Thule roof racks. view full answer...
There is an option to install your Thule 599xtr bike rack to the aero bars such as your Thule WingBar Evo 127. All you need is the Thule Xadapt2 AeroBlade and XSporter Loadbar Adapter # Xadapt2. I Included the review video for the Thule Xadapt2 AeroBlade and XSporter Loadbar Adapter # Xadapt2.
Another option is the Thule ProRide XT # TH598004 which comes ready to fit into the T tracks on your aero bars. When installed with the Thule One-Key System Lock Cylinders # TH450400 this system... view full answer...
There are a few ways to tell if you have a pre-2016 or post-2016 Yakima FrontLoader Wheel Mount Bike Carrier part # Y02103. The best way to tell is to look for the date code sticker which is usually located near the front wheel holder. The easiest way to tell would be to note the color of the release buckle on your rear wheel strap. If this buckle is red then you have pre-2016 and need the Replacement Knob for Yakima Frontloader part # 8880226 but if this buckle is grey you have a post... view full answer...
The Kuat Mini Skinny Roof Cargo Basket and Bike Carrier # MSR1B-EXB uses a clamping system instead of a track mounted system. The U-Bolts ate a bit more sleek looking than the standard U-Bolt kit though as the housing they insert into hide them really well.
Track mounted cargo carriers aren't super common but we do have a few options you can check out from Inno with their Shaper 100 # Inno Shaper 100 Roof Cargo Basket - Channel Mount - Aluminum - 46-1/2" x 41-7/8" - 110 lbs
Item # INXA569... view full answer...
If you're looking for a replacement rear wheel tray for your Yakima FrontLoader Wheel Mount Bike Carrier, part # Y02103, we have you covered.
The replacement is right here, part # Y8880845. It's designed for both the ForkLift and the FrontLoader carriers. view full answer...
The Kuat Vagabond X Roof Cargo Basket and 2 Bike Carrier # VX201-VX202 is a monster of a roof cargo basket at 73" x 41" and the added fork mounts for your bike and crossbars makes this a versatile cargo basket. The square crossbars allow you to attach a kayak or ski and snowboard carrier. I agree with you the aggressive style looks cool especially when you start throwing gear and a kayak up there. This basket will take up a good amount of space on your roof at 73" in overall length which... view full answer...
The Thule UpRide Roof Bike Rack for Fat Bikes - Wheel Mount - Clamp On or Channel Mount - Aluminum, part # TH599000-FB, will carry bikes with tire widths between 3" - 5". In addition, the wheel strap is longer on this UpRide for fat bikes. If you want to use one rack for two bikes, my solution would be to get the Thule UpRide Roof Bike Rack - Wheel Mount - Clamp On or Channel Mount - Aluminum, part # TH599000, which will work with traditional sized wheels. Then you should get the Fat Bike... view full answer...
The RockyMounts BrassKnuckles Roof Bike Rack for Fat Bikes # RKY1201-FB is only available in black but for a white wheel-mount bike rack I recommend checking out the Thule UpRide Roof Bike Rack for Fat Bikes # TH599000-FB instead. I've actually had the opportunity to install the standard tire version, part # TH599000, a few times so I'm attaching my video of this on a 2020 Audi Q7 for you to check out. view full answer...
The 2020 Honda Civic Si is a tricky vehicle to carry bikes on because the design keeps trunk mount racks from fitting and there aren't any trailer hitch receivers that fit either. You can go with a roof rack but that stays on the car and will likely get in the way if you have a sunroof. Instead I recommend going with a SeaSucker bike carrier.
SeaSuckers use vacuum cups to mount to your Civic's roof or rear glass. They're surprisingly secure. I've tried pulling one of the cups off a... view full answer...
Yes, the Thule UpRide Roof Bike Rack part # TH599000 will fit the factory roof rack/crossbars on a 2020 Subaru Outback. The factory Subaru roof rack/crossbars are a very standard size/shape therefore you should not have any issues using most rooftop mounted accessories such as the Thule UpRide Roof Bike Rack which is a great choice by the way as well.
The only other item I might add is the Rightline Gear Moki Door Step part # RL100660 which would help with getting the bike on and off... view full answer...
Both your Thule UpRide # TH599000 and ProRide XT # TH598004 roof bike racks would have come with hardware to mount them directly to OEM instead of the T-Slots, but if you've misplaced the hardware we have replacements which you can find listed below:
M6 x 92 mm T-Bolt - # 853-6511 - 4 of these; 2 for each rack
M6 x 72 mm T-Bolt - # TH65BH - 1 of these for the UpRide
M6 x 64.5 mm T-Bolt - # TH49PM - 1 of these for the ProRide XT
Around the Bar Bracket - # 1500052940 - 6 of these; 3... view full answer...
The Kuat Trio Roof Bike Rack - Fork Mount - Gunmetal Gray # RU01 or Black and Polished Chrome # TR02 will require an adapter for a Boost 110 mm thru-axle fork. What you need is the Boost 110 Adapter for Kuat Trio Bike Rack - 110 mm x 15 mm Thru Axles # TRFA15x110 or Boost 110 Adapter for Kuat Trio Bike Rack - 110 mm x 20 mm Thru Axles # TRFA20x110.
I have added links to video reviews of both adapters and the Trio bike rack for you to check out. view full answer...
In order to haul your 15mm x 110mm through axle bike on the Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier - Steel - 58-1/4" x 41" - 165 lbs # RRRMCB03, you will need to use Thru Axle Insert # RRRBCA036. I attached a demonstration video which shows how to install and use this adapter with the Rhino-Rack XTray. view full answer...
Yes! I confirmed with my tech at Hollywood Racks that you can use the Hollywood Racks Sport Rider Bike Rack for 2 Recumbent Bikes - 1-1/4" and 2" Hitches # HR1000Z-R with a recumbent bike and a standard e-bike at the same time. However, it is important to make sure that the e-bike does not exceed the 50-pound weight capacity of the rack. view full answer...
When determining if certain accessories can be mounted to a roof rack system you want to look at a few things. First, if it is a clamp-on accessory then you to make sure it can fit the style of roof rack that you have (square, round, aero etc.). You then want to check the max crossbar dimensions that the accessory can fit and make sure the roof rack is not bigger than that max dimension; these dimensions are typically listed on the product page of roof racks and any roof rack-mounted accessories.... view full answer...
I can confirm that the weight capacity of the Malone Pilot TC ST Roof Bike Rack part # MPG2103 is 33 lbs. If you need a higher weight capacity, the Swagman Race Ready Roof Bike Rack part # S64705 which is similarly priced is rated at 45 lbs. The Inno Tire Hold II Roof Bike Rack part # INA389 has the highest weight capacity of 50 lbs. view full answer...
The most economic option for a locking roof rack that is compatible with the Rhino-Rack XTray Pro # RRRMCB03 is the Curt Roof Rack for Raised Side Rails # C18118. The XTray will mount right onto the bars of the Curt Roof Rack's aero bars and the bars will give you plenty of weight capacity (150 pounds) you need to mount the XTray and extra cargo.
As far as locking the basket to the crossbars, I recommend the Malone LockUp Cable Lock # MPG356. The 8 foot length of the cable will allow... view full answer...
It certainly does, the fork block of the Swagman # S64704 Enforcer roof mount bike rack is lockable and includes 2 keys. I've put together a photo for you that shows this. I've also linked to a product demonstration video for you. view full answer...
The raised side rails of your 2003 Infiniti FX35 actually make it very easy to install a set of crossbars like the Malone AirFlow 2 part # MPG216 that is a fit for your vehicle and would also work great with the Thule Tandem roof bike rack part # TH558P. view full answer...
As long as the round bar on your Yakima Rack and Roll Trailer # Y08106 is between 0.6"-1.2" tall you will be able to mount the Inno Tire Hold II Roof Bike Rack # INA389 without any adapters. The included mounts work on round, square, aero and elliptical crossbars as long as they fall in the 0.6"-1.2" height and under 3.5" wide. view full answer...
The Thule Aero Bars # TH711220 have a t-slot opening of 1/2 inches and the bottom width is 3/4 inches. The Inno Fork Lock Roof Bike Rack # INXA391 will work with not only Inno bars but bars that will fit the dimensions I've included in a diagram below. An opening of 10.5~11.5mm, an inside width of 21~22mm and a height of 5mm. If your Thule bars will fit those measurements, you can use them together. view full answer...
Yes, the Rhino-Rack Roof Rack will fit on your 2007 Toyota Matrix:
49" Vortex Crossbars - # RRVA126B-2
2500 Series Legs - # RRRLKVA
Fit Kit - # DK062
You should be just fine to fit the Yakima RocketBox Pro 12 Y07191 and the Yakima FrontLoader # Y02103 on the 49" crossbars. The RocketBox is 36" wide so that leaves you with about 13" for the FrontLoader. Keep in mind that you'll likely need to mount the box or bike rack on the outside of the legs so that you have enough room on the... view full answer...
I totally understand how it can be confusing for you to look at all the roof mount basket options we have available, but I'm happy to point you in the right direction.
I'll start by saying that when it comes to the construction (aluminum vs steel), you are correct in saying that an aluminum basket is going to be the more lightweight option. However, as far weight capacity is concerned, you're going to be limited by the capacity of your roof before you're limited by the capacity of the... view full answer...
Yes, you can still use the locking skewer when the thru-axle adapter is installed onto the Swagman Enforcer Roof Bike Rack - Fork Mount - Clamp On - Aluminum # S64704. You will basically slide the thru-axle adapter in, then slide the locking skewer through the adapter to lock it. I attached a demonstration video for you to check out regarding this bike rack. view full answer...
I suggest the Yakima HighRoad Roof Bike Rack, # Y02114. This wheel-mount carrier lets you transport 1 bike on your roof rack crossbars. Pivoting wheel hoops hold bike by the front wheel, and TorqueRight knob prevents over-tightening. Rear-wheel cradle adjusts to hold bikes of different lengths.
view full answer...
We do have an option for you to add a roof rack to your 2005 Forest River Rockwood 1940LTD that will allow you to add bike racks to carry your bikes, and what you can use is the SportRack Pop-Up Camper Roof Rack # SR1020.
This rack is designed to fit pop-up campers that are a maximum of 85-1/2" wide, and will not fit campers that have roofs with rounded or curved edges, but from my research it looks like your pop-up is 85" wide and has straight edges, though I do recommend verifying... view full answer...
To mount your 2020 Orbea Orca OMX on your roof with a SeaSucker, you can use the Talon, part # 298-BT1004. This has a fork mount that can be replaced with the HUSKE 12-mm x 100-mm Thru-Axle, part # 298-BA14203, to fit your bike.
I've linked to video reviews of both of these parts for you to look at. view full answer...
The Rhino Rack Road Warrior part # RBC036 is a really great choice that fits the factory crossbars of your 2018 Honda Odyssey, is priced great, and comes with locks for the bikes and the rack. You might have to stagger the direction of the bikes as you install them but you should have no problem fitting 5. view full answer...
Yes there are!
For the type of basket you're looking for I strongly recommend the Rhino-Rack XTray Pro Cargo Basket # RRRMCB03. This unqiue 58-1/4 inch x 41 inch basket features two integrated fork blocks that allow you to mount 2 bikes with 12 mm x 100 mm thru axles right inside the carrier. Additional aluminum sleeves like # RRRBCA039 for 9 mm x 135 mm thru axles are available to allow for different sized bikes.
The basket itself has a robust 165 pound weight capacity and is compatible... view full answer...
Yes, the Yakima HighRoad Roof Bike Rack item # Y02114 does fit the Thule ProBar Crossbars item # TH713600. I also recommend the Yakima Same Key System item # Y07202. This set of locking cores allows you to secure your bike rack. It fits into the integrated locking cable. view full answer...
Yes, the Yakima HighRoad Roof Bike Rack item # Y02114 will fit Thule crossbars based on the clamp on attachment style. The part number you refenced Th1069 is one created specifically for Pace Edwards by Thule. That kit includes the:
Fit Kit for Thule Podium-Style Roof Rack Feet - 3101 item # THKIT3101
Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 item # TH460R
Thule ProBar Crossbars - Aluminum Long - Qty 2 item # TH713600
I have attached an installation video... view full answer...
The Rhino Rack Hybrid Roof Bike Rack # RRRBC050 that you referenced can fit around the Rhino Rack crossbars you have but this rack does not have ability to fit into top channel of crossbars.
The most similar bike rack that will fit in the top channels of your crossbars is the Thule ProRide XT part # TH598004 which is a very similar roof rack that allows you to keep both wheels of the bike installed. view full answer...
The Rhino-Rack MountainTrail Rooftop Bike Carrier - Fork Mount # RBC035 you were looking at will fit the Yakima JetStream Crossbars on your 2014 Chevrolet Cruze perfectly, and is a great option to carry a bike with your Cruze.
I included a video of the # RBC035 on a 2015 Chevrolet Cruze for you to take a look at. view full answer...
Yes, you can certainly mount the Thule ProRide XT Roof Bike Rack # TH598004 backwards with the bike facing the rear of your vehicle. This bike rack uses the same clamps and mounting hardware on the front and rear, so you won't have any issue turning the carrier around to mount it backwards. You may not need to do this as it comes down to the length of your crossbars. I would measure your crossbars to verify if there will be enough room to fit both of your bikes without the handlebars or... view full answer...
A bike rack that uses a wheel-mount design, such as the Rhino-Rack Hybrid Roof Bike Rack - Wheel Mount - Clamp On - Aluminum # RRRBC050, is not ideal for bikes with fenders. This is because the hook that clamps around the front wheel would likely interfere with a fender and possibly cause damage.
Instead, you will want to go with a frame-mount carrier such as the Thule ProRide XT Roof Bike Rack - Frame Mount - Clamp On or Channel Mount - Aluminum # TH598004. This carrier clamps around... view full answer...
In order to lock a RockyMounts TomaHawk Roof Bike Rack like part # RKY1222 you will need to use the Lock Cores for RockyMounts Bike Carriers part # RKY0332 which locks the bike to the rack and the rack to the vehicle. view full answer...
There are some subtle differences between the Kuat Mini Skinny # MSR1B and the Yakima SkinnyWarrior # Y07014 aside from the Kuat being 1" wider and 2" longer. First, the Yakima SkinnyWarrior weighs about 10-lbs less. Not only will this be easier to get up and down off the vehicle when not in use, it's going to give you a bit more capacity on on your roof in terms of weight you can add to the basket. As you've also noticed, the Kuat has a fork mount bike carrier built in (Requires that your... view full answer...
I did some research, and I did find an option that will work for you. Unfortunately, the rack I did find that will work with your bicycle with the 49" wheelbase is not a wheel mounted roof bike rack. So the Yakima HighRoad, part # Y02114, will not work with your bicycle. I understand that 1" is not that much, but it becomes a big deal because your rear wheel strap cannot be seated correctly and it will have to be stretched to fit. I think that is too big of a risk to take with your bicycle.... view full answer...
The Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier # RRRMCB03 is 58-1/4 by 41 inches at the base or 55-3/4 inches by 39-3/4 inches at the top so you can connect wherever is most convenient for your load to be secured.
The Stretchable Cargo Net and Tie-Down Straps for Rhino-Rack Steel Mesh Cargo Basket - 47-1/5" x 31-1/2" # RLN1-RTD4 is a great option for this carrier as long as the load is evenly distributed. If you just want the net it is # RLN1. Ratcheting straps are not... view full answer...
Yes! The Inno Fork Lock Roof Bike Rack # INXA391 will fit just fine with the Malone AirFlow2 Roof Rack # MPG215 on your 2019 Volkswagen Tiguan.
Attached are some review videos for you to check out. view full answer...
The Inno Multi Fork Lock Roof Bike Rack # INA392 that you referenced can fit tires up to 29 inch in diameter so it would work great with a 27.5 inch or 28 inch tire. The weight capacity is 50 lbs which should still be fine as when your front wheel is removed it should be under that so this rack would work great. view full answer...
Round bars are basically the same across all brands so you won't have an issue making this rack fit. You can use the RockyMounts BrassKnuckles Roof Mounted Bike Rack # RKY1201 on any roof rack if it has a crossbar spread between 24" and 43" inches. This bike rack fits round, square, aero/elliptical, and most factory crossbars no problem. It's pretty simple to install so I would recommend that you get the locks # RKY0332 to go with it just so it doesn't run off when you're away from the vehicle. view full answer...
I believe what you are looking for is something like the Kuat Vagabond X # VX201 or Mini Skinny # MSR1B which come with 9-mm skewers already installed (see attached photo) since the Rhino-Rack XTray # RRRMCB03 requires a thru axle plus an adapter sleeve # RRRBCA039.
If your front wheel isn't easily removable then a better solution is to use the Yakima LoadWarrior # Y07070-74 with a wheel mount bike rack like the FrontLoader # Y02103.
view full answer...
I spoke with a representative from Rocky Mounts. He told me the RockyMounts BrassKnuckles Roof Mounted Bike Rack - Wheel Mount - Black, part # RKY1201, can carry bikes with wheelbases up to 48" in length. So this bike rack will not be compatible with your bike with a 49" wheelbase.
I have included a video review link below. view full answer...
As it comes from the factory, the included fork blocks on the # RRRMCB03 XTray pro can accommodate 15mm axles. To carry your bike with the 9mm axle, you'd need to add the Rhino Rack # RRRBCA039 sleeve for 9mm axles. The sleeve is sold separately, and I've linked to it for you. view full answer...
According to the owner's manual, the OEM roof rack on your 2013 Suburban has a 200 lb capacity. Your # S64710 Swagman Fork Down bike racks will work just fine. If the bikes you're carrying max out the 35 lb capacity of each rack, you're looking at 105 lbs plus the approximately 20 lb combined weight of the racks will leave you well below the 200 lb capacity.
To make the roof a bit easier to access, you might also be interested in a door step like the # RL100660 from Rightline. view full answer...
Thank you for the info! The Thule ProRide XT Roof Bike Rack # TH598004 fits crossbars up to 3-1/8". The Rhino-Rack Crossbars # RRVA137S-2 have a width of 3-1/8". These two parts have been confirmed to fit, so you shouldn't have any issues with the clamp fitting around the crossbars. However, fortunately there is another way to mount your Thule bike rack onto the Rhino-Rack crossbars. The Thule # TH598004 has T bolts that will slide into the top track of the Rhino-Rack # RRVA137S-2 Crossbars.... view full answer...
We used to carry a dual-bike roof rack carrier but at this time we no longer have any so your best option would be two single bike racks like the Yakima HighSpeed part # Y25FR for a fork mount or a # Y75FR for a rack that allows you to keep the front wheel installed. Both of these racks install easily and securely into the top channel of your Thule Aeroblade bars and hold the bikes very securely. view full answer...
Since you have the Audi crossbars on your 2021 Audi Q5 I recommend measuring the width of the crossbars along with the crossbar spread, which will determine compatibility of a roof-mounted bike rack. Crossbar spread is a measurement from the center of one crossbar to the center of the next crossbar (see attached photo).
The Rhino-Rack Hybrid Roof Bike Rack - Wheel Mount - Clamp On - Aluminum # RRRBC050 fits crossbars that are no more than 3-1/2" wide and fits a crossbar spread of 21-5/8... view full answer...
For your application you'll need to use a roof-mount bike rack. If you have the factory crossbar system on your 2015 Honda Pilot then you can use a bike rack like the Thule ProRide XT # TH598004 directly on those crossbars.
If you don't have the factory crossbars then you can either choose a roof rack from the linked selection (based on roof style) and still use the ProRide XT, or you can use a SeaSucker which mounts directly to your roof via powerful vacuum cups. We have the 1-bike... view full answer...
Yes the Yakima FrontLoader bike rack part # Y02103 that you referenced will fit on the Rhino Rack crossbar setup for Retrax XR Tonneau Covers # RRVA165B-RRRLT600 that you referenced. view full answer...
I think I can help you determine if the Inno Fork Lock, part # INXA391, fits your Alfa Romeo Giulia's roof rack or not but I wasn't able to get the specific dimensions of the T-bolt. I was able to find in the installation details that it shows a diagram of the size of T-slot needed in the crossbars. The slot needs to be 21 to 22 millimeters at the widest point within the channel and 10.5 to 11.5 millimeters wide at the opening. It should also be about 5 millimeters tall. Take a look... view full answer...
The best cargo bag for the Kuat Mini Skinny Roof Cargo Basket and Bike Carrier # MSR1B is the Rhino-Rack Rooftop Cargo Bag # RRLB200 because it is a waterproof bag that will fit nicely in the Kuat basket.
The inside (usable cargo space) of the Mini Skinny measures 52" long x 20-1/4" wide x 5-1/4" deep while the Rhino-Rack Cargo Bag is 55" long x 19-1/2" wide x 11-1/2" tall. Since the bag is a few inches longer it will hang over the front of the basket where the fairing is ever so slightly,... view full answer...
The Rhino-Rack Hybrid Roof Bike Rack for Fat Bikes # RRRBC050-FB is only designed to carry bikes with the front wheel still installed.
If you'd like a fork mount rack then the Rhino-Rack Road Warrior # RBC036 or MountainTrail # RBC035 would be what you're looking for. view full answer...
You can use a cable like part # 8291DPS to lock the basket to your crossbars, but unfortunately there isn't a lock designed to lock the Rhino-Rack XTray Pro Cargo Basket # RRRMCB03. view full answer...
We have a way for you to add a bike rack to your 2018 Honda Accord sedan's roof, though there isn't a permanent-mount bike rack or roof rack option for your car. So what you would need to do is install a roof rack which you can use to mount a bike rack.
And for the roof rack, the option I recommend for your '18 Accord sedan is from Rhino-Rack because it is more economical than similar brand roof racks while not sacrificing anything in terms of quality, makes it by far the best value.... view full answer...
The Swagman # S64705 Race Ready roof bike rack does indeed include a lock and 2 keys. The ratcheting hook that holds the bike upright is lockable, as you can see in the photo I put together for you.
I've linked to a demonstration video featuring the Race Ready bike rack. view full answer...
I checked with Kuat and the Vagabond X part # VX201 that you referenced has a distance of 23 between the bike carriers so you'd have roof for a snowboard carrier to fit between them as long as the overall length was less than that. The narrowest Thule snowboard rack is 24 inches wide so you'd need something smaller like the Rhino Rack # RR573 which is 18-1/2 inches in length overall. This carrier can carry up to 2 snowboards. view full answer...
The Kuat roof rack accessories just use clamps but they also sit directly onto the crossbars so you would have the same amount of clearance whether they mounted in the T-Slot of Thule aero-style crossbars or not.
For example, the Kuat Trio Roof Bike Rack, which comes in Gunmetal Gray # RU01 and Black and Polished Chrome # TR02, sits directly on the roof rack bars and then utilizes clamps that sit under the crossbars for the installation. The overall height you will be adding to the Thule... view full answer...
Yakima has roof mounted bike racks that fit your 2021 Honda CR-V with the factory crossbars but Thule does not have any fits for your roof rack setup. The Yakima HighSpeed # Y02115 is similar to the Thule ThruRide and is a confirmed fit for your factory bars. It fits the thru axle bike setups as well. view full answer...
Both of the roof-mounted bike racks you mentioned do fit square crossbars - the Yakima HighSpeed Roof Bike Rack # Y02115 and RockyMounts SwitchHitter LS Roof Bike Rack # RKY1270.
Of the three racks, the best of these and the one I recommend is the Yakima HighSpeed # Y02115.
This rack is the most well-built, as evidenced by the fact it has the highest weight capacity among the three of 40 lbs per bike, while also being capable of holding bikes with tires up to 5" wide. It is also the... view full answer...
Yes, the Thule ProRide XT Roof Bike Rack part # TH598004 will work perfectly with the Rhio-Rack Vortex Aero Crossbars. In regards to mounting, you can use either the wraparound clamps for the channel/track mounts. The major roof rack manufacturers use a fairly standard channel/track size so most are cross compatible. view full answer...
Thanks for the nice words, and let's start with fit; I did check with the manufacturers and can confirm that all three roof-mounted bike racks you mentioned - the Thule UpRide Roof Bike Rack # TH599000, Yakima HighRoad Roof Bike Rack # Y02114, and Yakima FrontLoader Wheel Mount Bike Rack # Y02103 are each a confirmed fit for the factory roof rack on your 2018 Subaru Outback.
Let's start with the Yakima, and the difference is that the HighRoad is the newest version of the FrontLoader... view full answer...
We have roof racks that fit your 2011 Audi Q5's factory fixed mounting points like the Thule Wingbar roof rack part numbers # TH711320, # TH710601, and # TH186019 which has a crossbar spread of 24 inches. That would mean that the factory spread of your current crossbars is also 24 inches.
The Rhino Rack cargo basket part # RRRMCB03 that you mentioned does fit a crossbar spread of 24 inches so it would fit and work well for you in that regard. I attached a review video for this basket... view full answer...
The RockyMounts BrassKnuckles # RKY1201 will not mount using T-slots on crossbars. However, the RockyMounts JetLine Bike Rack # RKY1321 can.
The Jetline will only work with bikes that have a quick-release front wheel. It does feature a locking option by adding two lock cores # RKY0332.
For another channel mount bike carrier that uses T-slots the Thule ProRide XT # TH598004 is a frame mount that doesn't require the front wheel to be removed. It uses a padded clamp that holds your... view full answer...
The Yakima HighSpeed Roof Bike Rack, Item # Y02115, and the Yakima ForkLift Roof Bike Rack, Item # Y02098, are solid products that are designed to be durable as well as provide very secure platforms for bikes. I confirmed with Yakima that both will work with your Whispbar roof rack. Which is the better choice for you will depend on what kind of bike you have and what you need. Both work with a wide range of bikes. Both work with most types of crossbars including the Yakima Whispbars.... view full answer...
Yes, we do have the correct replacement rear wheel tray for your Yakima FrontLoader Wheel Mount Bike Carrier # Y02103. What you will need in order to replace the tray is the following part:
- Replacement Rear Wheel Tray for Yakima ForkLift and FrontLoader # Y8880845
I verified with Yakima for you that this is the correct replacement tray for the FrontLoader so you're all set! view full answer...
Between the Yakima HighRoad # Y02114 and Thule UpRide # TH599000 wheel-mount roof bike carriers I give the nod to the Yakima because it has two complete wheel hoops rather than one hoop and a clamp. This mounting method means more support the entire front wheel/tire. I would give the advantage to the Thule only if your tires are smaller than the 26-inch recommended minimum for the HighRoad; the UpRide accepts tires from 20- to 29-inches.
In terms of clamping force you can control this... view full answer...
A 50 inch crossbar spread is going to be too big for any of the roof bike racks we offer to fit. Also the 1.5 inch height of the bar is going to be too large as well.
I see you have a rear mounted spare in the picture you submitted. Since most likely it's attached to a RV bumper one option you might have is the Swagman Around the Spare bike rack part # S80501. view full answer...
I wouldn't say what you are trying to do is impossible, but it's not recommended for sure. The mounting studs would be too small to spread the weight of the rack through so it would most likely bend the sheet metal.
You'd be better off installing the roof rack part # S80510 first on the sheet metal then installing the part # RKY1222. view full answer...
I like your outside the box thinking, however I believe we have a better option for you that will be nowhere near the difficulty. I recommend the SeaSucker Roof Bike Rack for Trikes - Wheel Mount - Vacuum Cup Mounted # 298-BD1005. This system will allow you to place your holds wherever needed for the perfect fit and will keep your trike in place. Each vacuum cup of this system is rated for 21 lbs pull strength and I've attached a video to show you the strength of these vacuum cups in... view full answer...
The replacement rear ratchet clip for your Yakima FrontLoader, part # Y02103, is here. It's the Replacement Rear Wheel Tray, part # Y8880845. view full answer...
Unfortunately I have no way of getting the Inno Fork Lock Roof Bike Rack part # INXA391 keyed alike. Instead you can use the RockyMounts JetLine Roof Bike Rack part # RKY1321 which is almost identical to the INNO and add Replacement Lock Core for RockyMounts Carriers part # RKY0331-E096 for each of the racks to get exactly what you are looking for.
I have linked a couple of videos on these below. view full answer...
The two racks you mentioned are pretty similar takes on the same type of bike rack but I would go with the Rhino Rack Hybrid part # RRRBC050-FB over the RockyMounts BrassKnuckles # RKY1201 for a couple reasons. The Rhino Rack is 3 lbs lighter, comes with locks (BrassKnuckles requires you buy them separately), and if ever needed to carry a fat bike it's already compatilbe whereas the BrassKnuckle requires an additional adapter. view full answer...
The Yakima HighRoad Roof Bike Rack part # Y02114 will fit bikes with tires up to 4" wide. The Thule UpRide Roof Bike Rack part # TH599000-FB works on bikes with tires up to 5" wide if you need an option which will accommodate larger tires. view full answer...
The Rhino-Rack XTray Pro Cargo Basket and 2 Bike Carrier - Steel - 58-1/4" x 41" - 165 lbs # RRRMCB03 won't restrict you based on the tire size. The integrated fork blocks fit 15mm x 100 mm thru axles, but you can use sleeves for different size axles.
Rhino-Rack Thru Axle Sleeve for 15-mm x 150-mm Thru Axle Skewers # RRRBCA037
Rhino-Rack Thru Axle Sleeve for 20-mm x 110-mm Thru Axle Skewers # RRRBCA038
Rhino-Rack Thru Axle Sleeve for 15-mm x 110-mm Thru Axle Skewers # RRRBCA036
Rhino-Rack... view full answer...
The main difference between the Rhino-Rack MountainTrail Rooftop Bike Carrier part # RBC035 and the Rhino-Rack Road Warrior Rooftop Bike Carrier part # RBC036 is how they mount. The MountainTrail mounts using a wraparound style clamp whereas the Road Warrior mounts in a track/c-channel.
If you have a track/c-channel then you can use both. The Road Warrior has a three year warranty and the MountainTrail has a lifetime warranty. I have attached a review video of both bike racks for you as well. view full answer...
We do have the replacement clamp you need for the UpRide, which fits both the standard Thule UpRide Roof Bike Rack # TH599000 as well as your Thule UpRide Roof Bike Rack for Fat Bikes # TH599000-FB. I verified with Thule for you that the correct replacement part is the following:
- Replacement Around The Bar Bracket # 1500052940 view full answer...
According to the folks at Yakima, the front clamp is integrated into the rack and isn't removable, with the exception of the front tensioning handle, which is available as part # 8880190. The rear clamp assembly is available as part # 8880208. The assembly includes the tray mount, top pads, bottom aero mount, screw and top fastener. view full answer...
The Kuat MiniSkinny, part # MSR1B and the MiniSkinny Extended, part # MSR1B-EXB have different maximum crossbar spreads.
The MiniSkinny has a maximum crossbar spread of 35-7/8 inches, and the MiniSkinny Extended has a maximum crossbar spread of 49-7/8 inches.
Because we use a standard vehicle for most of our installed photos (as we did in this case) the crossbar spread doesn't actually change because the vehicle's crossbar spread is in the same spot. I've included a photo of both... view full answer...
The Thule ProRide XT part # TH598004 was designed to be able to attach to either the top channel of the crossbars or by clamping around it. You may be missing the clamps which we offer as a replacement part with # 1500052940. view full answer...
For your 2017 Chevy Equinox I recommend using the Thule UpRide # TH599000 for your bikes because of how easy it is to use and you don't have to remove your front wheel to transport your bike.
To carry your canoe I highly recommend the Lockrack Adjustable Watersport Carrier # Lockrack # LR54FR for a few reasons. The first is that it can accommodate pretty much any boat style out there and the second reason is that this carrier has integrated locks that help grip your canoe and eliminate... view full answer...
The best option to carry your bike on the trunk of your 2019 Honda Civic Sedan Si is the SeaSucker Komodo part # 298-BK1910-BK in black part # 298-BK1910-SV in silver, part # 298-BK1910-AB or part # 298-BK1910-GO in gold. Traditional trunk mounted bike racks can start to dent the vehicle's bumper after a while. The SeaSucker Komodo uses 4 vacuum cups that won't scratch or dent the car to attach the rack to the trunk. It is a fork-mount carrier so you would need to remove the front wheel... view full answer...