bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Coupler Locks


  • Recommended Keyed Alike Coupler, Latch and Hitch Pin Locks
  • Instead of the Curt # C23088, which is not available keyed alike with any other products, I recommend using the etrailer Hitch and Coupler Lock Set - 2" Hitch - 2-5/16" Ball - Keyed Alike # e68ZR. This comes with the coupler lock, a latch lock and a locking hitch pin. Then you can add as many additional locking hitch pins as you might need keyed alike with the etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome # e98880. You will want to make sure you select...
    view full answer...

  • Best Wraparound Trailer Coupler Lock with 5" Wide Lip
  • The trailer coupler lock I recommend for a trailer coupler with large lip is the Master Lock Universal Trailer Coupler Lock part # 379DAT because the lock does not span the width of the coupler therefore the large lip is not nearly as much of an issue. The Blue Ox Trailer Coupler Lock part # BX88351 and options like it max out at around 4-3/4" wide.
    view full answer...

  • Coupler Lock for Trailer Coupler with Rolled Lip
  • You are absolutely right that the rolled lip on your trailer's coupler will prevent using some types of locks but we do have a solution for you. If your coupler measures no more than 4-1/2-inches wide (including the lip) you can use the Fastway Universal Trailer Coupler Lock # DT25013KA. If it is wider then instead you can use Master Lock # 377DAT. The coupler lip appears too tall to work with lock # ML389DAT.
    view full answer...

  • Is etrailer Coupler Lock As Easy to Defeat as Curt Coupler Lock
  • While the etrailer coupler lock part # e98897 and the Curt # C23086 are somewhat similar the etrailer has a different lock setup so it would not be able to be defeated in the same way. With that said I really like the Fastway coupler lock part # DT25013KA as fits easier and provides the best protection that we've found.
    view full answer...

  • Coupler Lock for Dexter DX12.5 (Model 10) Actuator with Wide Lip
  • The Master Lock Trailer Coupler Lock # 377DAT you purchased can accommodate a max coupler width (including lip) of 4 inches , so for a lock that works with up to a 4-3/4 inch coupler width, I recommend the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33-40D. I pulled our Titan Model 10 actuator # T2477600 (Dexter DX12.5), and found that it measures just over 4-5/8 (4.63) inches edge to edge of the coupler lip, so the BLTL-33-40D will definitely be wide enough and work perfectly with...
    view full answer...

  • Alternative to Blaylock Total-Encasement Coupler Lock that Fits Standard Lipped Couplers
  • Thank you for sending the photo! While I have a solution for you, the Blaylock Total-Encasement Coupler Lock, part # BLTL-23 will not work. I is designed to fit Bulldog Collar-Lok style couplers that use a 2-5/16" ball, like # BD028463 for example. For a lipped coupler, like yours, Blaylock does offer the EZ Lock Trailer Coupler Lock for 2-5/16" Lipped Couplers - Aluminum - Push Button # BLTL-34. Or, if you prefer something that provides a more complete enclosure for your coupler,...
    view full answer...

  • Recommended Trailer Hitch Receiver and Coupler Locks For a 2020 Toyota Tundra
  • I recommend the BOLT Trailer Hitch Receiver Lock # BL7023584 and BOLT Trailer Coupler Lock # BL7025289 for your 2020 Toyota Tundra. These locks will key to your Toyota edge cut key(see diagram), it will not work if you have a center cut key. The Receiver Lock # BL7023584 is 5/8" in diameter with a 3.55" inside length. The Coupler Lock # BL7025289 has a 5/16" diameter and is adjustable to lock from 1/2" to 3-3/8". If you have the center cut key the Blue Ox Hitch Receiver and...
    view full answer...

  • How to Use the etrailer Coupler Lock for Flat Lip Couplers
  • I can absolutely explain how the etrailer Trailer Coupler Lock for your flat lip coupler works, and it is extremely simple. What happens is you will slide the lock over your flat lip coupler, and push the pin up - it won't take any strength at all, you can do it with a finger. With the pin up, just turn the key and you're done; it's locked to the coupler. When you want to remove it, turn the key in the opposite direction and the pin will come down. That's literally all there is to it!...
    view full answer...

  • Availability of Replacement Key for Draw-Tite Trailer Coupler Lock
  • We used to carry replacement keys for those locks but Draw-Tite discontinued those keys and so the only option we have is for you to replace the entire lock with something like part # e98893 or # e98894.
    view full answer...

  • Can Puck Lock Be Used with Blaylock EZ Lock Trailer Coupler Lock # BLTL-33
  • The Blaylock EZ Lock Trailer Coupler Lock # BLTL-33 is designed to work perfectly with a standard padlock, but I think the typical opening size on the back of a puck lock will be a bit too small to fit over the end of its pin/shank. The pin/shank on this lock has a 3/4" diameter, while for example the opening on the Master Lock Puck Lock # ML6271 we have available has a height of just 19/32", which wouldn't allow it to mount over the pin. Your best option is going to be with something...
    view full answer...

  • Keys Compatible With BOLT Trailer Coupler Lock # BL7032492
  • Yes, your 2019 Ram 1500 Key is going to be compatible with the BOLT Trailer Coupler Lock # BL7032492. I have included an image of the different style Dodge, Ram, Jeep and Chrysler Keys that will fit this coupler. We also have the following BOLT locks that are most commonly used with your Ram. BOLT Trailer Hitch Receiver Lock # BL7018448 BOLT Trailer Coupler Lock # BL7025286 BOLT Coiled Cable Lock # BL7018452
    view full answer...

  • Recommended Keyed Alike Lock for Latch Style Trailer Coupler
  • We sure can, but the Master Lock # 605DAT lock you'd looked at isn't available keyed alike. We do have options for keyed alike coupler locks, however. I'd recommend a latch lock such as the etrailer brand # e98890 for a 7/8 inch span or # e98885 for a 1/2 inch span. The locks are constructed of stainless steel for superior corrosion resistance and are available keyed alike. Just choose 'keyed alike' on the drop down menu on the product page and choose your desired quantity. You'll...
    view full answer...

  • Recommended Coupler Lock That Can Be Keyed Alike
  • I do have a great option for you, however the Blu Ox Trailer Coupler Lock # BX88351 that you referenced cannot be keyed alike with other units. If you were to order 7 of these locks you may get 7 different lock cores/keys. For a similar coupler lock that can be ordered keyed alike I highly recommend the Fastway Universal Trailer Coupler Lock # DT25013KA, which like the Bulldog model will fit 1-7/8", 2", and 2-5/16" hitch balls. It features an anti-drill pin that discourages drilling...
    view full answer...

  • Coupler Lock that Fits EZ Latch Demco Coupler without Lip
  • For the channel style of Demco EZ latch coupler that does not have a lip around it you'd want the wrap around style coupler lock like the part # DT25013KA as the # BLTL-23 only fits the Bulldog Collar Lok style couplers.
    view full answer...

  • Best Keyed Alike Fastway Universal Coupler Lock
  • I have a solution for you, and we have several lock assemblies that can be keyed alike, but the one you were looking at item # BLTL-20-40D can not be keyed alike. I recommend the Fastway Universal Coupler Lock Key 316 item # FA86-0015-316. This coupler lock also fits 1-7/8", 2" and 2-5/16" couplers. I have linked our entire selection of couple locks that can be keyed alike as well as a couple of review videos for this lock.
    view full answer...

  • Coupler Lock that Fits Airstream with Trigger Latch Coupler
  • For your Airstream with a trigger latch style coupler a Fastway Coupler lock like the part # DT25013KA would be your best option as it is the most universal style coupler and it works really well.
    view full answer...

  • AMPLock Trailer Coupler Lock Suggestions For A 2022 Jayco Jayfeather 25RB
  • Depedning on what your trailer has we may have what you need. If your trailer has an underslung 2-5/16" ball coupler # AMP56FR is a great option. -If you have a flat lip 2" ball coupler, then the AMPLock Coupler Lock for Flat Lip 2" Ball Couplers # AMP89FR is a great option. -If you have a rolled lip 2" or 2-5/16" ball coupler, then the AMPLock Coupler Lock for Rolled Lip 2" or 2-5/16" Ball Couplers # AMP29FR will work great. Finally, if you have a 2" ball coupler without a...
    view full answer...

  • Difference Between Curt & etrailer Coupler & Hitch Lock Set
  • I can go over the differences in the locks for you, though real quick I do have to note that we wouldn't have any way of knowing what coupler locks fit any specific trailer like your Jayco (locks fit coupler types as opposed to trailers). That said, let's go over the differences. The etrailer Hitch and Coupler Lock Set - 2" Hitch - 2-5/16" Ball # e68ZR is only a fit for a 2-5/16" ball coupler, while the ball coupler can be either 2" or 2-5/16" on the Curt Trailer Hitch Receiver and Coupler...
    view full answer...

  • Recommended Coupler Lock for 2020 Airstream Flying Cloud with Demco eZ Latch Coupler
  • The best locking device we have for a 2020 Airstream Flying Cloud with Demco eZ Latch Coupler is the etrailer Trailer Coupler Lock part # e98887. There should be a pin hole on the side of the coupler which this lock will fit into and stop either a hitch ball from being coupled or uncoupled. If you are looking for a wrap-around style lock, you could use the Fastway Universal Trailer Coupler Lock part # DT25013KA. That said, you could use both lock styles as well if needed.
    view full answer...

  • Lock For Demco EZ Latch Coupler on Airstream Basecamp 20X Travel Trailer
  • It sounds like your Airstream travel trailer uses a Demco EZ Latch coupler such as part # DM14793-95. You'll need a lock with a minimum inside span of 3 inches. I'd recommend the etrailer brand # e98888 which has a 3-3/8 inch inside span.
    view full answer...

  • Can the Master Lock Trailer Coupler Lock be Keyed Alike
  • I have a solution but unfortunately the Master Lock Trailer Coupler Lock part # ML389DAT can not be ordered with a specific key number. Instead the etrailer Trailer Coupler Lock for Flat Lip part # e98895 can be ordered keyed alike. It doesn't work on the 1 7/8" coupler, for that use the etrailer Trailer Coupler Lock part # e98897. These are very nice quality locks that will keep your trailer secured. Check out the video I did on them that I have linked it for you.
    view full answer...

  • Trailer Coupler Lock for a U-Haul 5x8 Enclosed Trailer
  • There isn't much information on what size coupler the U-Haul trailers use. However, they state they are compatible with 1-7/8" and 2" hitch balls. So, more than likely they use 2" couplers. The 2-5/16" Coupler Lock, part # e98895, will fit on them, but there will probably be quite a bit of play. I recommend going with the smaller version, part # e98897. This one is designed to fit both 1-7/8" and 2" couplers, so it will have a more snug fit around the U-Haul coupler. I've linked to...
    view full answer...

  • AMPLock Trailer Coupler Lock For Demco 2" EZ Latch Couplers
  • As long as your 2" Demco coupler does not have the edge lip like the Demco Cast Head Coupler # DM37ZR then you will be able to use the AMPLock Trailer Coupler Lock for 2" Ball Couplers w/o Lip # AMP54FR. If your coupler is more like the Demco Trailer Coupler # DM14976-52 with the lip you will need the AMPLock Trailer Coupler Lock for Flat Lip 2" Ball Couplers # AMP64FR
    view full answer...

  • Pin Diameter of 3-5/8 Inch Long Trailer Coupler Locks
  • The 3-5/8 inch long trailer coupler locks do only have pin diameters of 1/4 inch; there isn't a coupler lock available with a pin that has a slightly larger diameter, as the 1/4 inch is indeed standard. The locks that are 3-5/8 inches long are as follows: - Bulldog Easy Access Coupler Lock # BD580409 - MaxxTow Coupler Latch Lock # MT76FR I have added some links below to video reviews for you to check out as well if you'd like to take a look.
    view full answer...

  • Recommended Replacement Coupler For Wells Cargo Trailer That Has Coupler Missing Parts
  • I have a complete replacement option for you, but unfortunately we do not have any confirmed replacement parts for the coupler of your Wells Cargo Trailer. Instead I recommend going ahead and replacing the entire coupler with the Fulton 50-Degree A-Frame Coupler, 2-5/16" Ball, Low-Profile Latch, Primed Finish - 10,000 lbs # FE443050303 which has the same 10000lb rating as your trailer. This coupler fits standard 50 degree A-frames which your trailer more than likely has, but I recommend...
    view full answer...

  • How to Get Multiple Keyed Alike Trailer Hitch And Coupler Locks
  • We have an option for you, though there isn't a way to get matching keys for a Master Lock # 2848DAT trailer hitch and coupler lock set as they don't have a Keyed Alike option for a second set. What you can do in order to use the same key for multiple trailer hitch locks and coupler locks is use the etrailer locks, and select the "Keyed Alike" option from the drop-down on their product pages. This will get you all the locks keyed the same so you only have to keep track of a single key....
    view full answer...

  • Coupler Pin Locks that Can be Keyed Alike
  • We have coupler pin lock locks that can be keyed alike like the part # e98888 which has a span of 3-3/8 inches and # e98887 which has a 2-1/2 inch span. Or even # e98890 with a 7/8 inch span or # e98886 which has a 2 inch span. On the product page you'll select keyed alike on the drop down menu and all of the locks will use same key.
    view full answer...

  • Can You Order Multiple Curt Tri-Ball Trailer Coupler Locks With the Same Key
  • The Curt Tri-Ball Trailer Coupler Lock part # C48CR does not come with a keyed alike option so you'd only be able to receive multiple with the same key by chance. That said, we have plenty of other multi fit trailer coupler locks with keyed alike options such as the Fastway Universal Trailer Coupler Lock part # DT25013KA which is what I recommend. It can be ordered keyed alike.
    view full answer...

  • Trailer Coupler Lock Options
  • We have two different styles available that will fit, the Curt Tri-Ball Trailer Coupler Lock, # C48CR and the Master Lock Trailer Coupler Lock , # 377DAT that will fit your 2-5/16" coupler. We do not currently have an option available that encases a coupler that is 5".
    view full answer...

  • Lock Similar to Blaylock that is Steel Instead of Aluminum
  • Aluminum is a softer metal so if you were worried about it getting cut through quickly, and I don't fully blame you, I'd go instead with the FastWay lock part # DT25013KA which is steel and a similar design. This also fits nearly all coupler styles too which makes it very versatile.
    view full answer...

  • Recommended Trailer Coupler Lock With 2-1/2" Span That Can Be Keyed Alike
  • I have another option for you but the MaxxTow Coupler Latch Lock for Surge Brake Actuators - 2-1/2" Span - 1/4" Diameter # MT46FR you were looking at cannot be ordered keyed alike. Instead I recommend the etrailer Surge Brake Coupler Lock - 2-1/2" Span - 1/4" Diameter - Chrome # e98887 which has the same 2-1/2" span and 1/4" diameter but can be keyed alike by selecting the keyed alike option on the product page above the add to cart button. Since you are wanting 4 or 5 you will just...
    view full answer...

  • Keyed Alike Universal Coupler Lock
  • I have an alternative for you with identical features but The Master Lock Trailer Coupler Lock - 1-7/8", 2" and 2-5/16" Ball Couplers item # ML389DAT you referenced can not be keyed alike. I recommend the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 316 item # FA86-0015-316.
    view full answer...

  • Recommended Lock for 2 Inch Lipless Cast Coupler While Towing and Unhooked
  • For a lock for your lipless cast coupler I recommend the Blaylock EZ Lock Trailer Coupler Lock for 1-7/8", 2", and 2-5/16" Couplers - Aluminum # BLTL-33-40D. This lock has 3 pin hole positions for a tight fit on a variety of couplers and uses a stainless steel padlock with a hardened steel shackle to secure the pin in place. The aluminum construction will help resist wear and corrosion. If you would prefer a high-end lock that is specifically made for couplers without a lip, we also...
    view full answer...

  • What Keyed-Alike Coupler Locks Do You Recommend for a 2-Inch and a 2-5/16 Inch Coupler?
  • I have a solution for you. Unfortunately, Gorilla Guard coupler locks like the # 63227 and the # 63228 can only be keyed uniquely (independently). They cannot be keyed-alike. For an option that does allow it to be keyed-alike, I recommend two of the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # DT25013KA. Before adding these coupler locks to your cart, you need to select the "key alike" dropdown option under the price listing.
    view full answer...

  • Coupler Lock that Could Fit Demco EZ Latch Coupler
  • The Demco EZ Latch Couplers like the part # DM16680-52 have lips on them which is why the AMPLock Trailer Coupler Lock for 2-5/16" Ball Couplers w/o Lip # AMP34FR is not going to work as it's designed for couplers without a lip. You'd want something that was designed for lips like the part # e98894 instead. This fits with lips and also with a 2-5/16 inch ball fit.
    view full answer...

  • Can the TowSmart Trailer Coupler Lock Kit Be Keyed Alike
  • I do have options for you but the TowSmart Trailer Coupler Lock Kit part # TS84FR does not have a keyed alike option. The etrailer Hitch Receiver and Coupler Lock Set part # e99039 is a similar kit minus the surround coupler lock which does have a keyed alike option. I have attached all our keyed alike options below as well.
    view full answer...

  • How Does the BOLT Trailer Coupler Lock Fit Different Coupler Sizes
  • The BOLT Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers - For Ford Side Cut Key # BL7032496 comes with two different integrated balls. These don't look like your traditional hitch ball since they are not designed for towing. The ball is the round silver piece you can see mounted to the base plate below the shackle. The smaller ball fits a 1-7/8" and 2" coupler and the larger ball fits the 2-5/16" coupler.
    view full answer...

  • Best Trailer Coupler Latch Lock With 9/32 Diameter Pin
  • There is not a better trailer coupler latch lock with a 9/32" diameter pin than the etrailer Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span - 9/32" Diameter # e98883. The # e98883 is made of steel but also has chrome plating on the housing, and its actual lock mechanism is pick proof. At a maximum span of 2-1/2" it does have the length you need as well.
    view full answer...

  • Will BOLT Trailer Coupler Lock Fit 4-3/4 Inch Trailer Coupler Width
  • The BOLT Trailer Coupler Lock has a 5-1/2 inch inside width, so it will fit the 4-3/4 inch width of the coupler on your 2020 Jayco Travel Trailer with no problem. There are a couple of different BOLT coupler locks for Fords, and I have added a photo showing the difference between the keys for the BOLT Trailer Coupler Lock - 1-7/8", 2", and 2-5/16" Couplers - For Ford Key # BL7032491 and For Ford Side Cut Key # BL7032496. It looks like you have a 2018 Ford F-350, which means the latter...
    view full answer...

  • Are Locks Included Wtih Curt Trailer Hitch Receiver and Coupler Lock Set C23086 Keyed Alike
  • Within each set, the 3 different locks would be keyed alike. If you needed similar locks that are keyed differently, we offer some etrailer.com branded locks that would work great for you. etrailer Trailer Flat Lip Trailer Coupler Lock for 1-7/8 or 2 inch balls # e98897 etrailer Adjustable Trailer Coupler Latch Lock # e98883 etrailer Trailer Hitch Receiver Lock # e98880
    view full answer...

  • Hitch Lock For Jayco 171 BH
  • We still do recommend using a lock like this one # AT89006 For trailers, but it's not going to come keyed uniquely. This really isn't a problem though because the keys are such a unique one. For someone to have the same exact coupler as you AND wanted to steal your rig, is very unlikely.
    view full answer...

  • Availability of etrailer e68ZRCoupler Lock Kit With Yellow Slip-On Coupler Lock
  • The etrailer # e68ZR is only available with the coupler lock in the silver finish, but you can get the locks separately as # e98895, # e98880 and # e98883 and choose the 'keyed alike' option. This would provide you with the same kit, but with a yellow slip-on coupler lock.
    view full answer...

  • Correct BOLT Trailer Coupler Lock for a 2014 Ford F-250
  • The correct BOLT Trailer Coupler Lock for a 2014 Ford F-250 is part # BL7025285, not part # BL7025290 which is for 2017-2018 models.
    view full answer...

  • Keyed Alike Hitch Locks for 2-1/2 Inch Receiver and Trailer Coupler Latch
  • Although it isn't sold as a kit, we do offer a hitch lock that's compatible with a 2-1/2 inch receiver and a coupler latch lock that can be keyed alike. For the hitch lock, use # e98881 and # e98886 for the coupler latch lock. On the product page for both items, right above the 'add to cart' button there's a drop-down menu where you can choose the option of a keyed uniquely or keyed alike lock. If you choose the keyed alike option on both locks, they will be keyed alike for the same...
    view full answer...

  • Needing Keyed Alike Hitch and Coupler Locks for 15 Trailers
  • The etrailer branded hitch and coupler locks (see links) are all available keyed alike. Since this is a commercial application, you'll likely need locks for either a 2 or a 2-1/2 inch hitch. For a 2 inch lock, go with the # e98882 or for a 2-1/2 inch hitch, use # e98881. The etrailer brand coupler locks can also be had keyed alike the same way, such as # e98886 for a latch style coupler lock with a 2 inch span (many other width spans available) or the Fat Lip # e98893 for 1-7/8 or...
    view full answer...

  • Fastway Universal Trailer Coupler with Key Number 302
  • We have a version of the Fastway Universal Coupler Lock that has the key number 302 that you are needing with part # FA86-0015-302.
    view full answer...

  • Trailer Coupler Lock Recommended for 2015 Airsteam Flying Cloud with 2-5/16 Coupler
  • The etrailer # e87ZR trailer coupler lock is compatible with pre-2000 Airstream couplers with a rolled lip at the bottom of the coupler. The lock is compatible with 2-5/16 couplers.
    view full answer...

  • Coupler Lock for a 2019 Jayco Jay Flight SLX 242BHS
  • According to my research the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock # 377DAT will fit the coupler on your 2019 Jayco Jay Flight SLX 242BHS. I have attached a photo of this coupler lock on a trailer coupler that I believe is the same type that is on your Jay Flight. I have also attached a review video for you to check out.
    view full answer...

  • Bolt-On A-Frame 2-5/16 Inch Ball Trailer Coupler For 1973 Airstream
  • There is one A-frame coupler that accepts a 2-5/16" hitch ball and fits the bill perfectly that I really like, which is from Demco: - Demco 50-Degree A-Frame Trailer Coupler # DM16680-52 The reason I like this Demco coupler so much is because of its super easy to use latch system, called an eZ-Latch, which just stays closed all the time, until the coupler goes over the hitch ball and it just snaps on. That's all there is to it. This is also a bolt-on coupler like you wanted, and is...
    view full answer...

  • Which Coupler Lock Can I Use While Trailer Is Still Attached To The Tow Vehicle.
  • I have a solution for you, the Blaylock Total-Encasement Coupler Lock for 2" Bulldog Collar-Lok Couplers - Push Button # BLTL-22 is designed to put on your trailer while it is not coupled to your tow vehicle. We can however use the trailer Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span - 9/32" Diameter # e98883 to secure your trailer while it is coupled to your tow vehicle.
    view full answer...

  • Coupler Lock Recommendation for Trailer with Underslung Coupler
  • Thanks for the picture of your coupler! From that I can tell you have an "underslung" coupler which we have a coupler lock specifally designed for. For that you'd want the AMPLock Coupler part # AT89006 which will work great for you. I attached a picture of it installed on an underslung coupler just like yours as well.
    view full answer...

  • Can etrailer.com Brand e98888 Surge Coupler Lock Be Keyed Alike With Previously Purchased Lock
  • It is possible to get the # e98888 lock keyed alike to the lock you previously purchased from us, but you'd need to place your order by phone with one of our Customer Service folks. You can reach them at 800-298-8924. I've linked to a product demonstration video featuring the # e98888 lock you mentioned.
    view full answer...

  • What Type of Coupler Does BlayLock Coupler BLTL-20 Fit
  • The Blaylock Coupler Lock # BLTL-20 that you referenced is designed to fit the Bulldog Collar Lok style couplers like what you see in the picture I attached. If you are looking for a more universal style lock the Fastway part # DT25013KA is very universal and effective. It also works on Collar Lok couplers as well. The second picture I attached shows this lock installed on a few of the more popular coupler designs.
    view full answer...

  • Trailer Coupler Lock For Square Coupler With 2-5/16 Ball
  • It sounds like you have an Unique Functional Product 2-5/16" square coupler which was bought out by Dexter. The MegaHitch Coupler lock part # UF35-946510 is designed to fit the standard sized coupler so it will most likely not be wide enough or tall enough to fit the square coupler according to Ultra-Fab. I recommend to measure the height and width of your particular square coupler and compare it to the Blaylock EZ Lock Trailer Coupler Lock part # BLTL-33-40D which has a inside width...
    view full answer...

  • Comparing the Stainless Steel Trailer Coupler Lock e98890 and Trailer Coupler Lock e98889
  • The Stainless Steel Trailer Coupler Lock part # e98890 is made of stainless steel, not chrome plated which is why it is more expensive than the Trailer Coupler Lock part # e98889 which is chrome plated steel. The stainless steel option is better as you don't run the risk of the chrome plating chipping and exposing unprotected steel. In regards to the Bulldog Lifelong Trailer Coupler Lock part # BD580403, this will work with pretty much any trigger style latch with a 1/4" diameter pin...
    view full answer...

  • Recommended Trailer Locks for Bumper Pull Trailers and Gooseneck Trailer That Can Be Keyed Alike
  • I have a solution for you, but there is not a set of coupler locks for a gooseneck trailer and traditional coupler that can be keyed the same. However, there are some options that can be keyed alike within their application so if you needed more traditional coupler locks in the future those could be keyed like the first one. For the trailers you've got with traditional couplers I recommend using the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # DT25013KA,...
    view full answer...

  • What is the Strongest Coupler Lock and Locking Pin That Will Fit My Square Coupler
  • I do have a recommendation for a coupler lock for your square coupler. I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # DT25013KA. I recommend the Fastway Universal Lock because it is made to fit various couplers, including square ones like yours. Also, the bolted lock is internal to prevent prying and the key mech is rounded to make it more difficullt to pick. Finally, it fits couplers up to 4" wide and the shackle is 6" long top to bottom,...
    view full answer...

  • Recommended Coupler Lock for the Titan Model 20 Brake Actuator
  • I do have an option for you but the release handle on the Titan Zinc-Plated Brake Actuator part # T4750720 is going to limit the use of some coupler locks like the MegaHitch Lock Coupler Vault Pro part # UF35-946510. Instead, I recommend the Blaylock EZ Lock Trailer Coupler Lock part # BLTL-33-40D. In order to break though this lock you would have to cut though a 3/4" thick hardened steel pin which is easier said than done. This would require power tools but if a would-be thief does have...
    view full answer...

  • Will The etrailer Hitch And Coupler Lock Set - 2" Hitches Work With A 2" Ball Mount
  • Yes, the Curt Trailer Hitch Receiver and Coupler Lock Set - 2" Hitches - 2" or 2-5/16" Ball, part # C23088, will work with a 2" ball. It prevents a trailer ball from being inserted into the coupler of your unattended trailer. A coupler lock and a locking hitch pin are also included. The combination of all three will keep your trailer safe. I have included a demo video link below.
    view full answer...

  • How Does Bolt Locking Hitch Pin # BL7025285 Key to 2016 Ford Escape
  • As long as your key looks like one of the ones in the attached picture the # BL7025285 will easily key to it. Basically all you have to do is insert your key into the lock, turn it all the way and the lock is forever keyed to your vehicle's key. See review video for more info on this.
    view full answer...

  • BLTL-20 Coupler Lock Fit a Bulldog Coupler Heavy-Duty Cast Head Coupler w/ Wedge Latch
  • I went and pulled a coupler like you have part # BD44150W0317 and the coupler lock you are interested in part # BLTL-20 and found that they lock is wide enough to fit this coupler. I attached a picture that shows the two products next to each other to show that they would fit.
    view full answer...

  • Recommended Trailer Coupler Lock for Coupler with 5" Wide Lip
  • The best ball style trailer coupler lock we offer for a trailer with extra wide lip is the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock part # 377DAT since it does not wraparound the entire coupler. I looked though our options and none of the wraparound styles will work with a 5" wide lip on the coupler.
    view full answer...

  • Coupler Lock Recommendations for a RAM Brand Trailer
  • If your RAM brand trailer has a collar-lock style coupler like the Bulldog Coupler # BD028444 yes the EZ Lock Trailer Coupler Lock # BLTL-20-40D would be an excellent choice as a trailer lock. A more universal coupler lock that we offer is the Fastway Coupler Lock part # DT25013KA. I attached review videos for both coupler locks for you to check out.
    view full answer...

  • Getting Keyed Alike Locksets for Hitch, Coupler and Cable Locks
  • Yes, you can get all of the locks you have mentioned keyed alike as long as you order from our Keyed Alike locks page. If you order all the locks you need at the same time they will come keyed alike. If you decide you need another lock keyed the same later you can call our customer service line at 1-800-298-8924 and request a lock, as long as it is on our Keyed Alike locks page, with the same key by giving them the key number you have. When you order please be sure to select keyed alike...
    view full answer...

  • Recommended Trailer Coupler Lock for Multiple Wells Cargo Trailers
  • The Atwood AMPlock Underslung Coupler Lock part # AT89006 as the name states is for underslung trailer couplers, which is not what you have. You have an overslung trailer coupler therefore the AMPlock won't work. It also only fits trailers with a 2-5/16"coupler. For your multiple 2003 Wells Cargo Trailers, I recommend the Fastway Universal Trailer Coupler Lock part # DT25013KA because it is designed for overslung trailer couplers, will fit both 2" and 2-5/16" couplers, and best of all...
    view full answer...

  • Can Two Curt Trailer Hitch Receiver and Coupler Lock Sets Be Ordered with Matching Keys
  • The Curt Trailer Hitch Receiver and Coupler Lock Set part # C23086 does not have a keyed alike option so you won't be able to order two sets with the same keys but I do have one that is, the Reese Tow and Store Lock Kit part # RP7014700 so this is what I recommend.
    view full answer...

  • Keyed Alike 2 Receiver Hitch Locks and a Trailer Couple Lock
  • As long as the locks are from the same manufacturer and listed as being able to be keyed alike, we can accommodate your request. With the locks you are interested in, I would like to suggest one lock set hitch and coupler lock set, part # e99039, that includes a hitch lock and coupler lock, and then purchasing one extra hitch lock, part # e98880. You may save a couple dollars this way.
    view full answer...

  • Recommended Lock for Demco eZ-Latch Coupler
  • To secure your PJ Trailer that's equipped with the Demco eZ-Latch Coupler # DM14040-81 I highly recommend the Fastway Universal Trailer Coupler Lock # DT25013KA, which doesn't require a lip on the coupler for a proper connection. This is a heavy-duty lock that uses a ball and shackle to prevent potential thieves from coupling their truck to the trailer and taking off. Its hardened chrome-plated construction will resist corrosion and the bolt-blocked locking system prevents the lock from...
    view full answer...

  • Could Lock with 7/16 inch Diameter Pin Fit EZ Lock Trailer Coupler Lock BLTL-20
  • It might be a little bit tight but a lock with a pin diameter of 7/16 inch would fit the EZ Lock Trailer Coupler Lock # BLTL-20 that you referenced.
    view full answer...

  • Coupler Lock Recommendation for Trailer with 4 inch Wide Coupler
  • We have a solution that will work great but the part # BLTL-20-40D would not be what you'd need as it is designed to fit a Bulldog Collar Lok couplare and is only 3-3/16 inches wide. The # DT25013KA would instead be what I recommend as this fits all standard coupler sizes like what you have.
    view full answer...

  • Coupler Pin Lock Recommendation to Protect Against Bolt Cutters
  • The best defense against bolt cutters for coupler pin locks is to go with a coupler lock that fits the coupler latch so tight that a bolt cutter couldn't fit. The part # e98885 has span of just 1/2 an inch so it would be hard to get bolt cutters on the pin to cut it.
    view full answer...

  • Recommended Solution to Lock Trailer with Weight Distribution System Attached
  • It sounds like you're looking for a solution to lock your trailer coupler while the weight distribution hitch is still connected to the trailer, and I think you might be referring to a Fastway E2 weight distribution hitch. We do not have an e-trailer branded weight distribution system available. With all of that said, we do have some solutions that can help provide an added layer of security to your trailer, but you won't want to use the Tow Ready # TS84FR since you won't have the ability...
    view full answer...

  • Which Cone to Use on 2 Inch Trailer Coupler with the BOLT Trailer Coupler Lock Part # BL7032493
  • There are two different size cone's with the BOLT Trailer Coupler Lock part # BL7032493. The small cone is for 1-7/8" and 2" trailer couplers whereas the large cone is for 2-5/16" trailer couplers. There are several different types of trailer couplers which means that this lock will not be a perfect match for all. If the lock will not stay in place while using the smaller disc then it can be returned under warranty. These will be a bit of play inside the coupler but the lock should still...
    view full answer...

  • Correct Bolt Trailer Hitch Lock Accessories For a 2007 Gulfstream Motorhome on Ford E-450 Chassis
  • Yes, the BOLT Trailer Coupler Lock # BL7032491 will key to the ignition key on your 2007 Gulfstream Motorhome on the Ford E-450 chassis. We also have the Bolt Receiver Lock # BL7018447, Coupler Lock # BL7025285 and Padlock # BL7018519 that will also key to your ignition key to secure your trailer or other gear while in tow.
    view full answer...

  • Recommended Hitch Locks for 1-1/4 and 2 Inch Hitch Receivers
  • You can use the set of locks that comes with the Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches # 2848DAT, which comes with both locks keyed alike.
    view full answer...

  • Key Replacement For Fastway Universal Coupler Lock?
  • If you have the Fastway Universal Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers - Key 301 Item # FA86-0015-301 you will need the 301 replacement key part # FA-KEY-30. The replacement comes with two tube keys so I suggest putting one on a set of keys and put the other hidden away somewhere.
    view full answer...

  • Recommended Lock for Demco DM14040-81 Coupler
  • The # BLTL-23 Blaylock coupler lock is compatible with a very specific type of coupler, the CollarLok like our part # BD028499, so it wouldn't be a good fit for a coupler like the Demco # DM14040-81. A lock like the # DT25013KA or a latch type lock such as # 2847DAT would be your best fits.
    view full answer...

  • Do the etrailer.com Trailer Coupler Locks Have To All Be Purchased At the Same Time for Keyed Alike
  • Correct, the etrailer.com Trailer Coupler Locks like part # e98895 or part # e98889 must all be purchased at the same time in order to take advantage of the keyed alike option. I wish we could match the lock to a set of keys you already have but this is simply not possible from our side of things. Therefore, it would be best to order a few extras if you think you will have multiple trailers. The coupler and pin locks will also both come with the same lock code if ordered together and the...
    view full answer...

  • How To Order Stainless Steel Hitch Locks and Coupler Locks to be Keyed Alike
  • For stainless steel coupler lock and hitch receiver lock that can be keyed alike, I would recommend the etrailer brand locks. They offer the etrailer Stainless Steel 2 Inch Hitch Receiver Lock, part # e98882, which will fit most 2 inch hitch receivers, and has an inside width of 2-5/8 inches. For coupler locks they offer the etrailer Stainless Steel 7/8 Inch Span Coupler Lock, part # e98890, which has an inside width of 7/8-inch, and the etrailer Stainless Steel 1/2 Inch Span Coupler...
    view full answer...

  • Trailer Coupler Lock
  • I like the etrailer Trailer Coupler Lock, # e98895. This is lower price point but still very good quality lock for flat lip 2-5/16" ball couplers. This is made of aluminum construction with a shuttered keyhole that keeps out dirt and debris to prevent damage to cylinder. It has an easy quarter-turn lock activation.
    view full answer...

  • Will Atwood AMPlock Underslung Coupler Lock # AT89006 Fit a Grand Design Imagine Travel Trailer
  • Atwood AMPlock Underslung Coupler Lock # AT89006 will fit couplers under 4-5/8 inches wide and under 2-1/2 inches tall. If the coupler on your trailer meets those requirements then the lock will fit.
    view full answer...

  • Are Gorilla Guard Coupler Lock Replacement Keys Available
  • Gorilla Guard does not offer replacement keys for their Trailer Coupler Locks like part # 63228 unfortunately. The only option is to replace the whole coupler lock. You may consider the Blaylock EZ Lock Coupler Lock for 1-7/8" and 2" Lipped Couplers part # BLTL-38 because they offer replacement keys and keyed alike options. They also use the barrel keys which are more secure compared to the standard keys. If you have a 2-5/16" coupler you'll need part # BLTL-34.
    view full answer...

  • Could Curt Tri-Ball Trailer Coupler Lock C48CR be Cut with Bolt Cutters
  • The pin of the Curt lock part # C48CR is steel which is a harder metal to cut, but if a thief had enough time and tools handy they could probably cut through it. But theft deterrents really are only going to be effective at stopping the casual thief. If someone had a set of bolt cutters on them like you asked about they probably would be able to cut through it relatively easily.
    view full answer...

  • Recommended Lock for Underslung Coupler on 2018 Jayco Trailer
  • Your new 2018 Jayco trailer has a bottom mount or underslung coupler. For a lock that will work well, I recommend the Atwood AMPlock Underslung Coupler Lock # AT89006. This cast iron lock is designed specifically for underslung couplers and will help deter theft by blocking the ball socket and the surrounding flat lip. It features a rotating-disc-tumbler lock that provides maximum security with nearly a million possible key codes. It will fit flat-lipped couplers for 2-5/16 inch balls with...
    view full answer...

  • 2013 Ranger Boat Trailer Coupler Lock Recommendation
  • The most universal and effective coupler lock we offer is the Fastway Universal Lock part # DT25013KA which I would recommend for your application. We've found this basically fits all couplers that are less than 4-1/2 inches in width. I attached a picture that shows several styles of couplers it fits as well as a review video that shows it fitting them as well.
    view full answer...

  • What Coupler Lock will Fit My Jayco Jayflight Trailer?
  • I apologize for the difficulty in finding the right hitch lock! For a lock that fits all three standard ball sizes, I recommend the Master Lock 1-7/8", 2", and 2-5/16" Trailer Coupler Lock # 377DAT. I went ahead and linked a video that reviews the features of the lock.
    view full answer...

  • Availability of Coupler Lock With a 5/16 inch Pin Diameter
  • A pin with a 1/4 inch diameter, like part # e98886, is standard for coupler locks. Unfortunately there are none that are 1/16 of an inch larger in diameter. If instead you meant that you needed one with a span of 5/8 of an inch then you will want to go with the Master Lock Adjustable Trailer Coupler Lock # 2847DAT which has a 5/8 inch adjustment setting. If you meant that the pin diameter needed to be 5/8 inches then you are looking for part # e98880.
    view full answer...

  • Recommended Trailer Coupler Locks That Can Be Keyed Alike
  • I have another option for you, but there is not a way to get 5 of the Bulldog Lifelong Trailer Coupler Lock # BD580403 keyed alike. Instead I recommend the etrailer Trailer Coupler Latch Lock in Stainless Steel # e98890 or Chrome # e98889 which can be keyed alike. All you will need to do is select the keyed alike option from the drop down menu, and change the quantity to 5 before adding them to your cart. I included a video of the etrailer # e98890 and # e98889 for you to take a look at.
    view full answer...

  • Do you Have the etrailer Trailer Coupler Latch Lock with a 1 Span
  • The closest I have to the 1" is the etrailer Trailer Coupler Latch Lock part # e98890 which has the 7/8" span. There is some excess threading in the lock when installing it that will allow it to work with your 1" span requirements. Unfortunately they can only be keyed alike when ordered together.
    view full answer...

  • Parts Recommendations for Theft Deterrents for Trailer
  • We can help, but determined thieves are hard to totally beat. If I could see your coupler I could recommend you the best style of lock we'd have for it. The best solution though is multiple locks like a wheel lock and a coupler lock plus a GPS or alarm system as well. The most universal coupler lock we have is the part # FA86-0015-313 which we have found to be very universal and effective. Then for a wheel lock we have the part # RA-25 which would work well.
    view full answer...

  • Will the BOLT Trailer Coupler Lock # BL7032493 Stop All Thieves
  • If someone was willing to attack the BOLT Trailer Coupler Lock # BL7032493 with bolt cutters they were most likely pre-meditating stealing yours or someone else's trailer. What these devices are mainly designed for is stopping the opportunist thief who would maybe be tempted by an easy target. A determined thief with enough resources, time, and access to a trailer is most likely going to get what they want. This lock is basically designed to convince a thief to move on.
    view full answer...

  • Availability of Keyed Alike Trailer Coupler Latch Locks
  • We have what you're looking for but Master Lock doesn't offer a keyed alike coupler lock. I'd recommend using a similar coupler lock, like our part # e98886. Choose the 'Keyed Alike' option from the drop down menu, and choose the quantity of locks you need.
    view full answer...

  • Difference Between Keyed Alike and Keyed Unique on DeadBolt Coupler Lock
  • When looking at our etrailer.com Coupler Lock # e98888, or any of our etrailer.com locks, "Keyed Unique" means that each of the locks you purchase (if you purchase more than one) will use a different key. If you select "Keyed Alike" instead, each of the locks you purchase (again if purchasing more than one) will use the same key, making it much easier to keep track of if you have multiple trailers. If you are just purchasing one unit then it does not matter which option you choose (although...
    view full answer...

  • Is Metal Pin of Curt Hitch Lock # C48CR Difficult to Cut
  • The pin of the Curt lock part # C48CR is steel which is a harder metal to cut, but if a thief had enough time and tools handy they could probably cut through it. But theft deterrents really are only going to be effective at stopping the casual thief.
    view full answer...

  • Best Coupler Lock Recommendation for Atwood Yoke Coupler
  • For the yoke style couplers my favorite coupler lock is the Fastway part # FA86-0015-312. We have found that this is the most universal of the locks we carry and also works the best. It will work great on your yoke coupler part # AT80072. I attached a picture that shows it installed on a similar yoke coupler as well.
    view full answer...

  • Trailer Hitch Coupler for Micro Minnie 2108TB.
  • Any lock on a coupler will deter people from taking it, but at a certain point almost any lock can be destroyed. I think that the Universal Coupler Lock # DT25013KA is more breakable than something like this lock # e87ZR. This is for a 2-15/16 inch rolled lip coupler. It's a solid piece and there is not as easy of a spot for someone to take an angle grinder to it and cut it off. It will take a lot longer for someone to get through this kind of lock. I've included some videos for you...
    view full answer...

  • Is Fastway FA86-0015-315 Universal Trailer Coupler Lock Available Keyed to Key # 312
  • You certainly can, just order 4 of part # FA86-0015-312, which will get you 4 of the Fastway Maximum Security Universal Trailer Coupler Locks keyed to key number 312. The lock is compatible with couplers for 1-7/8, 2 or 2-5/16 inch trailer balls. The # FA86-0015-315 lock you'd looked at is keyed to key number 315, so it wouldn't use your desired key. If you click the provided link, you can see a product demonstration video featuring the lock.
    view full answer...

  • TL 33 and TL 45 Blaylock Trailer Coupler Locks
  • I believe what you're looking for is the Blaylock EZ Lock Trailer Coupler Lock for 1-7/8", 2", and 2-5/16" Couplers # BLTL-33-40D. This has the TL 33 and then what I could find on the TL 45 is that it's the same part as the circular padlock on this coupler lock. This has an aluminum construction so it will hold up really well to the elements and it fits a wide variety of couplers on the market. Attached is a sample installation video for you to check out.
    view full answer...

  • Recommended Trailer Coupler Lock for a 2-5/16
  • I want to start off by saying that any trailer lock that you purchase will never be able to fully secure your trailer from a thief. If they are determined enough to bring equipment with them to remove a lock then given enough time they will be able to remove a lock. This will be the case no matter what you what you are looking to put a lock on. With that being said, the Blaylock EZ Lock Trailer Coupler Lock # BLTL-33 that you referenced is a great lock that has received many great reviews...
    view full answer...

  • Can Master Lock Trailer Coupler Lock be Pried Off
  • Realistically, the Master Lock Trailer Coupler Lock # ML389DAT won't be pried off; even if there's enough room to fit a crowbar, getting it fully wedged in so that enough leverage can be applied to the lock to break it off just isn't going to happen. Theoretically, any lock can be busted with enough force but the odds of your trailer getting stolen with this lock on it are extraordinarily slim compared to not having the Master Lock on.
    view full answer...