bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Trailer Door Parts


  • Door Plunger and Socket Recommendation for Holding Horse Trailer Door Open
  • We have just what you need. What you are referring to is a door plunger like part # PLR64-66. The male end mounts on the door and the female socket mounts on the trailer wall and when needed it can hold the door open.
    view full answer...

  • Replacement Hinge for Screen Door on 2000 Sunnybrook Travel Trailer
  • We do carry a wide range of replacement parts for a variety of trailer door applications, including hinges. I have linked our main pages for all trailer door parts and also for hinges in particular. Since trailer makers don't maintain detailed record about small parts, such as hinges, used in construction of their trailers you can review the linked pages to find suitable replacement hinges. We do not offer larger components like doors and door frames since these are trailer-specific, so...
    view full answer...

  • Door Keeper Options for Horse Trailer with Swinging Rear Doors
  • If you have obstructions on the side of the trailer that would prevent the door from swinging all the way open then you will want to consider using either an angled door keeper like the 45-Degree T-Style Hook and Keeper Door Holder part # 37211765 or an extended one like the T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer part # 37210515 for 4" or part # 37210525 for 6". In order to confirm fit you will need to measure to see how far away from the trailer the door can get...
    view full answer...

  • Recommended Trailer Door Keepers for Horse Trailer Main and Tack Room Door
  • Since you have some obstructions on the side of the trailer preventing the main door from swinging all the way open you'll need to use an angled door keeper like the 45-Degree T-Style Hook and Keeper Door Holder part # 37211765. Then for the tack room you should be able to get away with just a standard keeper like the T-Style Hook and Keeper Door Holder for Trailer Rear or Side Door part # PLR9-SS. I have attached a full list of options below as well if you don't think the above will work...
    view full answer...

  • Available Door Parts for 2018 Jayco Jay Flight 28RLS Travel Trailer
  • We do sell RV screen door parts like latches like # LC201471, slides like # A77018 and push bars like # CAM42188, all shown on the linked page, but not complete doors since design and construction details vary so much between trailer brands, series and models. I wish we had a way to look up all the component parts of your 2018 Jayco Jay Flight 28RLS tandem-axle trailer trailer but OEM parts like doors are either fabricated or sourced by the trailer maker, Jayco, and to confirm the correct...
    view full answer...

  • Horse Trailer Rear Door Hinge and Spring Latch Availability
  • Thanks for the pictures of your horse trailer's rear door. The part # 2212 will work as a replacement for the hinges that you have. We have spring latches too like the part # SL716SS as well but do not have door seals.
    view full answer...

  • Picking Out Replacement Door Latch for 1998 Prowler Travel Trailer
  • I looked up pictures of 1998 Prowler trailers and the door latches I saw look to be the standard door latches found on most travel trailers. For that we have the Global Link RV Entry Door part # 295-000019 which will work well as a replacement. If there are other parts you need let me know and I'll see what your best options would be!
    view full answer...

  • Replacement Door Latch for 2003 Sundowner 8012 Sierra Horse Trailer
  • Hey Vicky, we have horse trailer door latches that should work well like the part # BA85FR or if it's a left handed door part # BA55FR. Let me know if what you have looks different though and I'll see what you'd need instead.
    view full answer...

  • Can Camco RV Baggage Door Catches be Used Inside of a Trailer
  • Although that's not what they're designed for the Camco RV Baggage Door Catches could be used on a cabinet door inside the trailer. However, if you're trying to use them to keep the doors closed this may not be your best option. The catches come in polar white, part # CAM44173, and colonial white, part # CAM44163.
    view full answer...

  • Available Trailer Door Parts for Cam Door Lock
  • I linked our main pages for trailer cam door locks and for all door-related items to help you see our wide range of products. These include cam door locks such as # 383200. Although we do not handle the Imperial Stamping products odds are very good that we can help you find what you need. If you cannot find what you're looking for on the linked pages you can submit a photo of your trailer lock and/or the part you need that will help a lot.
    view full answer...

  • Ramp Hinge PLR1902 For Making Swing Out Trailer Barn Doors
  • The Ramp Door Hinge # PLR1902 that you referenced could swing out as far as you are needing so it would work well for you. The slide door bar lock assembly part # 305736 can also be cut down as needed as well. Then for a mechanism to lock the door open you could use a rubber socket and plunger set like the part # PLR64-66.
    view full answer...

  • What Could Cause Ramp Door on Enclosed Car Hauler to Become Out of Line
  • It is difficult to say what exactly may have caused the ramp door on your enclosed car hauler to come out of alignment. It could be a bad hinge or something could have been damaged on the door itself with the previous owner, which over time lead to the door coming more and more out of line. We do offer some ramp door replacement parts, such as the Polar Hardware Ramp Door Hinge # PLR1902 if you find that the hinges should be replaced. I have included a link that will take you to our available...
    view full answer...

  • Recommended Replacement Trailer Door Holders For A Featherlite 5th Wheel Horse Trailer
  • To match your 1" long plunger you'll want the Plunger and Nylon Socket Door Holder # DH604. Just like with your old door holder these will hold your trailer doors open with ease by mounting one part to the door and the other to the side of your trailer. They create a 1" gap between trailer and door when in use. All metal parts are zinc plated to resist rust and corrosion.
    view full answer...

  • Replacement Door Latch for 1995 Kiefer Built Golden Eagle Horse Trailer
  • Since trailer makers do not maintain records/specs on smaller items like the door latches used in construction of their trailers you'll be best served by reviewing the linked page that displays all the types of door replacement parts for horse trailers that we offer. Feel free to send me a few photos of your door/latch if you are unable to find a suitable part using the linked page. If possible, remove the latch and measure the size of the opening in the door into which the new latch will...
    view full answer...

  • Are the Bracket/pulleys Adjustable on the Conventional Ramp Door Springs part # 9500468
  • Yes they can. The Conventional Ramp Door Spring for 8' Wide Enclosed Trailer - Dual Spring part # ERS160D96 that you looked at is designed to accommodate a wide range of door openings. You can use the same attachment points your current door spring uses and have the added benefit of dual springs and cables. Any excess you may have on the cross tube can be cut to accommodate your trailer.
    view full answer...

  • Cam Door Latch Recommendation for a Trailer Side Door
  • The width of the door on your trailer won't really matter when considering either the 36 inch tall version part # 305736 or the 55 inch tall # 3057-55 cam door latch. I would measure the height of your door and go with the biggest one that will fit the height of your door.
    view full answer...

  • Do You Carry Replacement Trailer Entry Doors For a Horse Trailer?
  • While we do carry Hinges # LC95VR, Latches # 295-000019, Gaskets # CS94VR and other parts for trailer doors we do not carry entire door assemblies. Based on your dimensions you will likely need to have a custom door built which you may be able to have done at a local trailer manufacturer in your area.
    view full answer...

  • Compatibility of Conventional Ramp Door Springs to Be Used On a Trailer With Horizontally Split Door
  • I do not see any reason that you will not be able to use the Conventional Ramp Door Spring for 8' Wide Enclosed Trailer # 362SA8207 on your trailer. You will have to make sure that the top door is opened before the bottom half since the angle of the cable will drag on the top of the door if it is closed.
    view full answer...

  • Trailer Hitch Availability of 2008 Toyota Yaris 5-Door Hatchback
  • According to my contact at Curt, the Class I reciever, part # C11480, will fit all 2008 Yaris lift back models, regardless of whether they are 3 door or 5 door. If you were planning on using the hitch for towing purposes, you might be interested in the following: Trailer Wiring Harness, part # 119178KIT For a 1-7/8 inch trailer ball, part # 19256 For a 2 inch trailer ball, part # 19258
    view full answer...

  • Available Locks and Replacement Parts for Horse Trailers
  • We have all sorts of door and vent parts for all types of trailers. And we can help you find items specific for horse trailers too; just click on the link provided to see all categories of items for horse trailers. Next click on the heading Door Latches, first image on the second row, to see just those items, such as flush latch # PLR5115 and # L3980. We also have Side-Door Bar Lock Assembly locks like # 305736.
    view full answer...