Filter Questions and Answers:

reset filter
Trailer Hitch
Trailer Hitch
 

Expert Answers about Trailer Hitch


  • Compatibility of EcoHitch Stealth Hitch Receiver # 306-X7373 on 2020 Tesla Model 3
  • The EcoHitch Stealth Trailer Hitch Receiver part # 306-X7373 is a fit for the 2020 Tesla Model 3. The EcoHitch is completely hidden behind the bumper and has a removable square receiver tube. The receiver tube unbolts from the cross body of the hitch. When you put the receiver tube back in the hitch you have to tighten the bolt down. I have attached an installation video for your reference. An easier completely hidden hitch option for the 2020 Tesla Model 3 is the Stealth Hitches Rack...
    view full answer...

  • Trailer Hitch for 2021 Tesla Model 3
  • The same Stealth trailer hitches that fit the 2020 Tesla Model 3 are also a confirmed fit and will work perfectly with the 2021 model. Keep in mind though that this is a Stealth brand hitch, which is different from EcoHitch. There isn't an EcoHitch hitch currently available that will fit the 2021 Tesla Model 3. If you ever plan on towing a trailer with your Model 3, you'll want to use part # 391TES317T, which comes with the needed ball mount piece and trailer wiring (along with the...
    view full answer...

  • Best Trailer Hitch for Mounting Trailer Wiring Harness on 2021 Toyota Highlander
  • The best trailer hitch receiver for your 2021 Toyota Highlander which is going to allow the easiest mounting of a trailer wiring harness is definitely the Draw-Tite Trailer Hitch Receiver # DT84MR. The reason the Draw-Tite is better than the similar Curt Trailer Hitch Receiver # C45CR is because the Draw-Tite has a built-in mounting point to attach a bracket, and the Curt does not; I have added a photo of the mounting point for you to check out. The correct 4-way trailer wiring harness...
    view full answer...

  • Easiest to Install Trailer Hitch for 2019 Ram 1500
  • There is an extremely simple trailer hitch installation for your 2019 Ram 1500, the Curt Trailer Hitch # C13419 which you can reasonably expect to install in less than 15 minutes. All you really have to do is remove the plug from the bumper step, put the hitch in position and secure the hardware. That is literally the entire process, as you can see from the accompanying cut out of the directions I added for you. The only tools you need are a 3/4" socket, 1/2" hexbit socket, ratchet...
    view full answer...

  • Which EcoHitch Fits 2016 BMW X5 with Back Up Sensors
  • We have a version of the EcoHitch that fits your 2016 BMW X5 that was designed for versions of the vehicle that have the backup sensors with part # EH44FR. This would be your best option and gives you ability to remove lower hitch opening when not towing for a totally hidden look. Thanks for the picture of your vehicle too as that's enough for us to know that it is the correct body style for this hitch.
    view full answer...

  • Recommended Hidden Hitch and Wiring For 2020 Subaru Ascent
  • The Curt Trailer Hitch Receiver 2" part # C25VR is a fit for the 2020 Subaru Ascent. The Curt hitch is hidden behind the removable fascia panel at the rear the Subaru. When the hitch is not in use the panel can be replaced for a completely hidden clean OEM look. I have attached a photo for your reference. If you plan on towing a trailer you will need wiring. For that I recommend T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118790. The Tekonsha wiring is more...
    view full answer...

  • Draw-Tite Trailer Hitch vs Curt Trailer Hitch for 2020 Jeep Gladiator
  • There are a couple of pretty big differences between the Draw-Tite Trailer Hitch Receiver # DR64FR and the Curt Trailer Hitch Receiver # CU74FR that fit your 2020 Jeep Gladiator, and I'll go over them so you can decide which trailer hitch is the better option for you. The first big difference is the install, with the Draw-Tite hitch being a more "traditional" install that secures to your Jeep's trailer frame using a combination of existing hardware and supplied hardware. The Curt hitch,...
    view full answer...

  • Difference Between EcoHitch, Curt and Draw-Tite 2 Inch Hitches for 2020 Subaru Forester
  • What sets the EcoHitch # 306-X7391 receiver apart from the other two options is that it's going to be completely hidden behind your bumper. The only portion that is visible is the 2 inch square receiver. So, if looks are important to you, this is the best option to retain the OEM look of your Forester. EcoHitches are made in the USA and are constructed of recycled aluminum, steel and stainless steel, making them slightly lighter and more eco-friendly. The Curt # C13409 is assembled in...
    view full answer...

  • Comparing Trailer Hitch Receiver Options for 2019 Mazda CX-5
  • That's a good question because the differences can certainly be subtle. The 2" trailer hitches that fit your 2019 Mazda CX-5 are the Draw-Tite Trailer Hitch Receiver # 76138, etrailer.com Trailer Hitch Receiver # e98902, and Curt Trailer Hitch Receiver # C13315. The most significant difference between the three hitches is going to be ground clearance, as both the Curt and etrailer hitches will measure about 13-1/4" from the ground while the Draw-Tite is about 12-1/2". And while this...
    view full answer...

  • Curt Trailer Hitch vs. Draw-Tite Trailer Hitch on 2020 Ford Escape
  • When it comes to the Curt Trailer Hitch Receiver # C23FR compared to the Draw-Tite Trailer Hitch Receiver # DR47FR for your 2020 Ford Escape there are a couple of differences between the two that I'll go over for you. The first is the style, with the Curt hitch being a concealed crosstube which only shows the receiver, while the Draw-Tite is a visible crosstube, so the Curt is going to maintain your Escape's look better than the Draw-Tite. The accompanying photo is from the linked instructions...
    view full answer...

  • Do Different Towing Capacities of Curt & Draw-Tite Trailer Hitch Matter for 2020 Ford Ranger
  • In a word, yes, the towing capacities of the two trailer hitches do matter, and I'll explain why. I checked out the owner's manual and it states that your 2020 Ford Ranger has a maximum 7,500 lb towing capacity (so long as the trailer has brakes). This means that the Curt Trailer Hitch Receiver # C13417 does not have the same capacity as the truck unless used with a weight distribution system. The Draw-Tite Trailer Hitch Receiver # 76275 has a 7,500 lb towing capacity which means you...
    view full answer...

  • Does Install of Draw Tite Hitch on 2019 Honda Passport Require Fascia/Bumper Modification
  • The install of the Draw Tite hitch part # 76290 is as simple as lifting the hitch into place and then using the included bolts to secure it to the vehicle frame. There is no fascia or bumper trimming at all. This also has more than enough capacity as the hitch is rated for up to 6,000 lbs trailer weight. The install is the same as the Curt # C13421 but this hitch has a lower capacity of 5,000 lbs trailer weight so I recommend the Draw Tite. To tow a trailer you will also need trailer...
    view full answer...

  • What is the Difference Between the Draw-Tite 76253 and Curt C25VR for 2020 Subaru Ascent
  • There are some slight differences between the Draw-Tite # 76253 and the Curt # C25VR, but it's mostly down to the quality of the powder coat on the two hitches. The powder coating on the Curt hitches is traditionally applied a bit thicker and is a better quality, in my opinion. This is going to translate to less dings and scratches and generally means that the hitch is going to be less susceptible to corrosion over the long term, so I do recommend going with the Curt # C25VR hitch for your...
    view full answer...

  • Does Curt Trailer Hitch or Draw-Tite Trailer Hitch Require Fascia Trimming to Install
  • Yes, one of the trailer hitches that fits your 2020 Kia Soul does require a small amount of fascia trimming during the install. The Draw-Tite Trailer Hitch Receiver # 24985 requires you to cut a 1 inch long x 5-1/2 inch wide section of the fascia underneath your 2020 Kia Soul. The Curt Trailer Hitch Receiver # C67FR does not require any type of fascia trimming, and the installs are otherwise the same so if you were looking to avoid trimming then I recommend the option from Curt. I...
    view full answer...

  • Curt vs. Draw-Tite Trailer Hitch for 2021 Chevy Traverse
  • While there are a lot of similarities between the Draw-Tite Trailer Hitch # 76184 and Curt Trailer Hitch # CU29FR that fit your 2021 Chevy Traverse, between the two I recommend going with the Curt # CU29FR. The biggest thing that separates the two hitches is that the Curt has better bumper clearance, so that means more room to use accessories like a bike rack or cargo carrier, and it also means you won't need any type of special-length ball mount. So that bumper clearance is going to...
    view full answer...

  • Comparing Curt Hitches for a 2017 Toyota RAV4
  • The differences between the between the Curt # C13149 and the Curt # C13406 for your 2017 Toyota RAV4 are that the 13149 has a visible crosstube and is rated for use with a weight distribution system while the 13406 has a concealed crosstube (for a more sleek look) and it isn't rated for use with a weight distribution system. If you plan on towing I recommend using the 13149 but if you just plan on using it for recreational items like a bike rack or cargo carrier then I recommend the...
    view full answer...

  • Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
  • There is only one difference between the Curt Trailer Hitch Receiver # C13176 and etrailer Trailer Hitch Receiver # e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer hitch has a matte black finish; other than that everything is equal, such as their 6,000 lb towing/900 lb tongue weight capacities, as well as the installation. The two have hidden crosstubes which means only the receiver is showing...
    view full answer...

  • Comparing 2" Trailer Hitches for 2020 Honda CR-V
  • There are indeed two 2" trailer hitches available for your 2020 Honda CR-V; the etrailer # e98848 and the Curt # C13397. These Class III hitches are essentially identical in every way except for the finish/powder coat that they use. I personally prefer the unique matte black finish that the etrailer # e98848 uses compared to the shiner gloss-like powder coat on the Curt. I think this creates a more rugged appearance that more closely matches the vehicle and it's also going to do a better...
    view full answer...

  • Receiver Hitch and Wiring for 2021 Toyota Sienna
  • Yes, the Curt Trailer Hitch Receiver 13470 # C22UR fits all models of the 2021 Toyota Sienna. It bolts into place on your Sienna with no drilling or welding required. It provides you with a 2" receiver that is rated up to a maximum or 350lbs tongue weight and 3500lbs towing (which is what Toyota rates the Sienna for). The Vehicle Wiring Harness # TK69FR is plug and play 4-Way for the Sienna as well for a simple installation with no cutting or splicing of the harness. The etrailer...
    view full answer...

  • Does the Curt/Draw-Tite Trailer Hitch for a 2019 Honda Passport Install Behind the Bumper Panel
  • I have attached a photo of the Curt Trailer Hitch Receiver part # C13421 installed on a 2019 Honda Passport. As you can see, the receiver tube is tucked neatly under the rear bumper but it does not install behind the rear bumper panel nor do any of the aftermarket trailer hitches for a Honda Passport including the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76290, only the factory trailer hitch which is going to cost you much more. If you will be towing a trailer with your Honda...
    view full answer...

  • Comparing Draw-Tite and Curt Trailer Hitches for 2019 Ford Ranger
  • The Draw-Tite and Curt trailer hitches that fit your 2019 Ford Ranger are very similar, with the biggest difference being their respective capacities. The Draw-Tite Trailer Hitch # 76275 has a towing capacity of 7,500 lbs and a tongue weight capacity of 1,125 lbs. The Curt Trailer Hitch # C13417 has a towing capacity of 6,000 lbs and a tongue weight capacity of 900 lbs. The only other difference is that the Curt is assembled in the USA while the Draw-Tite is not. Aside from...
    view full answer...

  • Draw-Tite Trailer Hitch vs. Curt Trailer Hitch for 2020 Kia Sportage
  • The Draw-Tite Trailer Hitch Receiver # 76074 and Curt Trailer Hitch Receiver # C13281 that fit your 2020 Kia Sportage have a lot in common, with a couple of important differences. They both install the same, using the included bolts to install into your Kia's frame rails. Due to this, the ground and bumper clearances will essentially be the same. That leads us to the major differences which push the Draw-Tite Hitch # 76074 into the winner's circle between the two hitches. First is towing...
    view full answer...

  • Hidden Hitch for 2021 Hyundai Santa Fe
  • The Curt Trailer Hitch Receiver part # C34ER which is a fit for a 2021 Hyundai Santa Fe does indeed have a hidden crosstube design. I have attached a photo of this hidden design for you below as well. If you'll be towing then you'll need a few other items; the Curt T-Connector Vehicle Wiring Harness part # CU94FR and etrailer Ball Mount Kit part # 989900.
    view full answer...

  • Recommended Trailer Hitch Receiver And Trailer Wiring For 2021 Toyota Highlander Platinum Hybrid
  • I would be happy to recommend the correct trailer hitch receiver and wiring harness for your 2021 Toyota Highlander Platinum Hybrid but we do not have a kit that includes both. Starting with the trailer hitch receiver I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # DT84MR due to it being the only trailer hitch available for your Highlander that will allow you to store a full sized spare tire. Moving on to the trailer wiring harness you will...
    view full answer...

  • Trailer Hitch For 2020 Honda Passport With Best Finish
  • Both the Curt # C13421 and Draw-Tite # 76290 Class III hitches are confirmed for a 2020 Honda Passport. Both hitches weigh roughly 42 lbs. We've found that the powder coat finish Curt uses to have a slight edge over that of the Draw-Tite, so that's what I'd recommend. Keep in mind, that even though the hitch uses a quality powder coat finish, the hitch will occupy a spot on the vehicle where it will be subject to much abuse. It's recommended to give the hitch a quick look-over once...
    view full answer...

  • What is Difference Between Stealth and EcoHitch for 2019 Tesla Model 3
  • The tongue weight capacity of the Stealth hitch # 391TES317 that fits your 2019 Tesla Model 3 is 200 lbs and the EcoHitch # 306-X7373 is 300 lbs which also is a confirmed fit. Both of these are great options with the big advantage that when you don't need it you can remove the lower opening completely and it's totally invisible. This is great from an aesthetic point of view as well as for aerodynamics. Your vehicle was designed to be as aerodynamic as possible to maximize mileage which...
    view full answer...

  • Easiest To Install Trailer Hitch for a 2019 Toyota RAV4
  • The easiest to install trailer hitch for your 2019 Toyota RAV4 is the Curt Trailer Hitch Receiver part # C13416 which should only take a novice around 30 minutes. The reason for this is because it is the only option that the manufacturer does not require the muffler to be lowered away from the vehicle for installation. The comparable Draw-Tite Receiver Hitches both state that the muffler must be lowered away from the vehicle for installation. I also recommend you go with the 2" receiver...
    view full answer...

  • Class III Trailer Hitch Recommendation for 2021 Toyota RAV4
  • The Curt # C13416 and Draw Tite # 76201 trailer hitches for your 2021 Toyota RAV4 are extremely similar. Both hitches install in the same location and have nearly identical installation steps. The Draw Tite hitch offers a slightly higher towing and tongue weight capacities, but as both hitches exceed the capacities of your RAV4, this really isn't much of an added benefit. I recommend going with the Curt Class III Trailer Hitch # C13416 because it is assembled and powder coated here...
    view full answer...

  • Draw Tite or Curt Hitch for OEM Look Installed on 2020 Jeep Gladiator
  • I checked out the OEM hitch that fits your 2020 Jeep Gladiator and appearance-wise you'd only see the hitch opening hanging below the rear bumper. The Draw Tite part # DR64FR that you referenced instead would have the entire crosstube hanging below the rear bumper. But we also have the Curt # CU74FR which gives you that OEM look where it hangs just below the bumper. I attached a picture for you to check out as well.
    view full answer...

  • Comparing Draw-Tite, Curt, and EcoHitch Trailer Hitches for 2017 Subaru Outback
  • That is an excellent question, and I believe you were referring to the three trailer hitches for your 2017 Subaru Outback that have concealed cross tubes, the Curt # C13410, Draw-Tite # 76227 and EcoHitch # 306-X7266. The EcoHitch is constructed from an alloy of recycled metals, which is something people do value and is the reason some people opt to go for it. That said, the Curt and Draw-Tite are going to be more cost-effective and they also have higher capacities than the 3,500 lb...
    view full answer...

  • Hitch for 2011 Subaru Outback Wagon with Best Ground Clearance
  • For your 2011 Subaru Outback Wagon the best hitch for ground clearance is the Curt # C13410 which fits very tightly to the rear bumper of the vehicle but also doesn't have a crosstube that hangs below the bumper either which helps with ground clearance on uneven terrain as the only thing that hangs down is right in the middle. This has 1/2 inch better ground clearance than the Draw Tite that also fits. I attached a picture of what it looks like installed as well as an install video...
    view full answer...

  • Hitch Recommended for 2019 Mercedes-Benz Sprinter 25000 Cargo Van
  • On this particular vehicle, the design of the rear bumper and its relation to the frame will dictate where the hitch sits. All the hitches available for the 2019 Sprinter 2500 with the standard bumper will sit pretty much up against the underside of the rear bumper as shown in the provided photo. Of the two hitches available for the way your van is set up, either the Curt # C13388 or the Draw-Tite # 75549 would work perfectly. Both hitches have similar weight capacities, but Curt has...
    view full answer...

  • Which Stealth Hitch Fits on a 2021 Tesla Model 3 With Only 3 Bolt Holes
  • You are correct that Tesla has removed one of the bolt holes where a hitch would be installed, but there is a new bracket that is available for this hitch that does address the change for the 2021 Model 3. You will still order the same # 391TES317 (for accessories only) or # 391TES317T (for towing and accessories) that is listed as a fit for your vehicle but new brackets are included. I've linked an installation video of this part for you to have a look at, as well.
    view full answer...

  • Draw-Tite or Curt Trailer Hitch Receiver for 2021 Toyota Corolla Sedan
  • Good question, and the answer is that while I think one is the better option - particularly for a self-install - there is essentially no difference between the actual hitches that fit your 2021 Toyota Corolla sedan, which are the Draw-Tite Trailer Hitch Receiver # 24983 and Curt Trailer Hitch Receiver # C34UR. They are both Class I hitches with a 1-1/4 inch receiver that install the same, but the biggest difference is the much better, far clearer instructions that come with the Curt...
    view full answer...

  • Is Cutting Required to Install Trailer Hitch on 2020 Audi Q7
  • Yes, all of the hitches we carry for your 2020 Audi Q7 require fascia trimming. The Curt, part # C13277 has the least amount of trimming. I've attached pictures that show how much trimming is needed for each hitch. Despite the Curt requiring less trimming I prefer the Stealth hitches for your Audi. The appearance after the hitch is installed is a lot nicer in my opinion. With the Curt you see the receiver opening all the time and you can even kind of see the area that was trimmed. With...
    view full answer...

  • Draw-Tite Trailer Hitch vs. Curt Trailer Hitch for 2020 Ford Ranger
  • There isn't much difference at all between the Draw-Tite Trailer Hitch # 76275 to the Curt Trailer Hitch # C13417 for your 2020 Ford Ranger, so you aren't missing anything though it's smart to ask. The differences are just in the respective weight capacities, with the Draw-Tite having a 7,500 lb towing capacity and 1,125 lb tongue weight capacity compared to the Curt's 6,000 lb towing capacity and 900 lb tongue weight capacity. The other difference is that the Curt hitch is assembled in...
    view full answer...

  • Parts Needed To Tow A Trailer With 2017 Dodge Grand Caravan
  • According to the owner's manual for the 2017 Dodge Grand Caravan with a 3.6L Automatic the maximum trailer tongue weight of the van with 1-2 people in it is 360 lbs so if your trailer tongue weight stayed under 360 lbs you shouldn't have an issue as long as you are not exceeding the gross combined weight rating, gross axle weight rating and the hitch capacity on your van. You want to make sure you are not exceeding the gross combined weight rating of your van which is 8,750 lbs that...
    view full answer...

  • Recommended Trailer Hitch for a 2020 Chevy Colordao
  • I recommend the etrailer Trailer Hitch Receiver # e98909 for your 2020 Chevy Colorado for a few reasons; it features a hidden crosstube so that only the receiver is visible and then it has a matte black finish which not only makes it look more durable than a glossy finish, but it also plays the part as it does a better job of covering up any dings from road debris. Since you will be using this for towing you also need the Wiring Kit # HM11141144 as well as a ball mount. For the ball...
    view full answer...

  • Is There an EcoHitch Stealth Trailer Hitch Receiver for a 2015 BMW X5 with Reverse Sensors
  • There are two EcoHitch Stealth Trailer Hitch Receivers for a 2015 BMW X5, part # 306-X7265 if you don't have reverse sensors or part # EH44FR if you do have reverse sensors. Therefore, it looks like you need the latter of the two options. I have attached a photo of the latter for you as well.
    view full answer...

  • Comparison Between Curt C13427 and Draw-Tite DT32RR Hitches for 2021 Hyundai Palisade
  • There really aren't too many differences between the Curt # C13427 and the Draw-Tite # DT32RR. Both install in the same manner. Both hitches would look the same once installed, the Curt uses round tube for the crossbar while the Draw-Tite uses square tubing, but that's a moot point because the crossbar will be concealed behind the bumper. Where the rear difference comes in is the capacity. Both hitches have a 5000 lb towing capacity, but the Curt has a 750 lb tongue weight capacity (maximum...
    view full answer...

  • Trailer Hitch Fit for 2020 Kia Telluride
  • Hmm, I'm not sure how that happened, but the # 13537 is not a fit for your vehicle, you'll want the # C13420. Curt has confirmed that the # C13420 is indeed a fit on a 2020 Kia Telluride, as you can see in the two install photos I've provided. In order to install the hitch, the spare tire needs to be removed and the exhaust lowered temporarily to allow easier access to the mounting points. As you can see if you look closely in the photos, the underside of the rear fascia also needs to be...
    view full answer...

  • Install Instructions For etrailer.com Hitch e98903 For 2020 Chrysler Pacifica Hybrid
  • Great question Chuck! There is a minute difference in installing the etrailer.com Trailer Hitch Receiver part # e98903 on a Hybrid compared to a non-hybrid 2020 Chrysler Pacifica. There is an emissions canister on the driver side frame rail that needs to be relocated temporarily to install the hitch. There are also holes that need to be enlarged. I have attached a photo for your reference.
    view full answer...

  • Recommended Trailer Hitch Receiver For 2021 Jeep Grand Cherokee L
  • For your 2021 Jeep Grand Cherokee L we have the Draw-Tite Trailer Hitch Receiver # DT57GR which is a confirmed fit as you can see in the included picture. This hitch has a 1,125lb tongue weight rating and a 7,500lb trailer weight rating so it will be plenty strong for carrying a bike rack or cargo carrier, or for using a ball mount to tow a trailer. I do recommend checking the owner's manual of your vehicle and using the lower rating between the hitch your Jeep. If you will be towing...
    view full answer...

  • Installing Tekonsha T-One Vehicle Wiring Harness on 2019 Volvo XC60
  • The Tekonsha T-One Vehicle Wiring Harness # 118773 plugs into factory ports behind the driver and passenger side tail lights. To access the connection points on your Volvo XC60 you should just need to remove the floor trim panels and access panels inside the rear cargo area (see attached image). It might take a bit of digging but the factory harness will then be located inside the access panel area. If you are still having trouble find the harness please let me know and I will be happy...
    view full answer...

  • Differences Between Curt and Draw-Tite Trailer Hitches for 2020 Toyota Sienna
  • This is a great question and I can definitely understand being a bit overwhelmed trying to work through all the available hitch options for your vehicle. Just to cut right to it I specifically recommend the Curt Class III Trailer Hitch # C13343 for your 2020 Toyota Sienna and I will go through my reasoning below. Both Curt and Draw-Tite offer two different 2" trailer hitches for your 2020 Toyota Sienna and they can be easily categorized into hidden and non-hidden options. The Draw-Tite...
    view full answer...

  • Comparing EcoHitch and Draw-Tite Trailer Hitches for 2020 Honda Odyssey
  • Both the EcoHitch # 306-X7372 and Draw-Tite # 76170 trailer hitches are confirmed to fit your 2020 Honda Odyssey as listed in our fit guide. These trailer hitches basically install in the same way and are excellent options that offer a super concealed look, so it's not that one is necessarily better for your Honda Odyssey than the other, but I'll point out for you what the main differences are to help you decide which to go with. I've also attached a photo of each to show how similar...
    view full answer...

  • Trailer Hitch Receiver Fit for 2020 Ford Escape Hybrid
  • There is a trailer hitch receiver that fits your 2020 Ford Escape Hybrid, though it is different than the one you mentioned. I confirmed with Curt that the hitch that fits your 2020 Ford Escape Hybrid is the Curt Trailer Hitch Receiver # C23FR. If you also plan on towing, the trailer wiring harness that fits your '20 Escape Hybrid is the T-One Vehicle Wiring Harness # TE54FR. I have added links to the installation instructions of both for you to check out as well.
    view full answer...

  • Recommended Hitch and Trailer Wiring Harness for 2021 Toyota RAV4
  • I can confirm that a hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13416 will fit both the Hybrid and non-Hybrid versions of the 2021 Toyota RAV4 since the frames of the vehicles are the same. If you check out the attached installation video, it shows this hitch being installed on a 2020 model that is a hybrid. For wiring, I recommend using the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118801, which is confirmed for use on both the...
    view full answer...

  • Best Trailer Hitch, Trailer Wiring Harness and Ball Mount for 2020 Hyundai Santa Fe
  • The best trailer hitch for a 2020 Hyundai Santa Fe is the Draw-Tite Trailer Hitch Receiver # 75908 because it an easy, bolt-on installation, provides the most ground clearance of any hitch for your Santa Fe and has a tab which will let you very easily mount your 4-flat wiring harness so it isn't just hanging off the back of your vehicle. The wiring harness I recommend for your 2020 Hyundai Santa Fe is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118784 because...
    view full answer...

  • Best Trailer Hitch for a 2020 Kia Sorento
  • The best trailer hitch for a 2020 Kia Sorento is the etrailer Trailer Hitch Receiver part # e98843 because unlike the other options for this vehicle it has a dull finish which we have found to not stand out nearly as much as the other glossier options. I know this may not seem like much but it really helps retains a factory like appearance as the shiny finishes tend to draw your eyes in which makes you see the trailer hitch first when looking at the rear of the vehicle. The etrailer Trailer...
    view full answer...

  • Comparing Curt and Draw-Tite Hitches for 2019 Mazda CX-5
  • The Curt # C13315 and the Draw Tite part # 76138 for your 2019 Mazda CX-5 are both really great options that would both work great for you, but if I had to pick one over the other I would go with the Curt as it is a little less visible at the rear of the vehicle than the Draw Tite. I attached a picture that shows both hitches installed and you can see the Curt has a smaller appearance at the rear of the vehicle. The big difference being a bracket on top of the hitch tube that I pointed...
    view full answer...

  • Recommendation between Curt and Draw-Tite Hitches for 2018 Range Rover Sport
  • Both the Draw Tite hitch part # 75229 and the Curt part # C13243 are really solid options for your 2018 Land Rover Range Rover Sport and they're both really similar in design but the one difference they have is the brackets toward the front of the vehicle. I slightly like the way the Curt is designed better as it looks like it would carry more weight but even then the Draw Tite is still really solid. So if I were in your shoes I'd buy the Curt. For trailer wiring then you'd want the...
    view full answer...

  • Recommended Trailer Hitch for 2020 Toyota Highlander With Full-Size 20" Spare Tire
  • The only trailer hitch option we offer for a 2020 Toyota Highlander that will allow a full-size spare wheel/tire to be reinstalled is the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT84MR. The Curt trailer hitch options part # C99FR and part # C45CR both require that a full-size spare wheel/tire not be reinstalled.
    view full answer...

  • Will Curt Trailer Hitch Fit 2019 Honda Pilot 2019 EX-L
  • I am happy to confirm that the Curt Trailer Hitch # C13146 is a fit for your 2019 Honda Pilot EX-L with all-wheel drive; I double-checked this fit with the manufacturer for you. The only thing to note is that it will only fit a Pilot with an 18" or smaller spare tire under the car, but that is true of each of the hitches that fit a '19 Pilot. The Curt Trailer Hitch # C13146 is a great option because it has a concealed crosstube so your Pilot maintains its clean look and is a complete...
    view full answer...

  • Parts Needed To Tow a Trailer With a 2020 Hyundai Palisade
  • In order to tow a trailer with a 2020 Hyundai Palisade you will need a trailer hitch, trailer wiring harness, and ball mount/hitch ball at the very least though there may be other items as well depending on the exact trailer. For a trailer hitch, I recommend the Curt Trailer Hitch Receiver part # C13427 because it has a hidden design which you can see in the attached photo and it is a bolt-on option with no cutting or drilling required. For a trailer wiring harness, I recommend the...
    view full answer...

  • 2017 Mercedes Sprinter 2500 144WB w/ Factory Step Bumper Hitch For Ground Clearance
  • The Draw Tite # 75601 and the Curt # 13358 that you referenced both are a fit for your 2017 Mercedes Benz Sprinter 2500. They have very similar ground clearance but the Curt has the slight edge as it seems to sit a bit higher. I attached a picture that shows the difference. The Curt is in the top picture.
    view full answer...

  • How Does etrailer Hitch Look Installed on 2019 Subaru Crosstrek
  • I have added some photos of how the etrailer.com Trailer Hitch # E98912 will look when installed on a 2019 Subaru Crosstrek. Though these are photos of the Curt Trailer Hitch # C13382, the two hitches are the same except for the etrailer hitch has a matte black finish compared to the gloss black finish of the Curt hitch, which basically just means the etrailer hitch has a bit more of a rugged look and isn't quite as prone to scratches. As you can see by the photos, the etrailer.com Trailer...
    view full answer...

  • Rise From The Ground On Stealth Hitch Ball Mount On 2020 Hyundai Palisade
  • The Stealth Hitches Trailer Hitch Receiver w/ Towing Package part # 391HYUNPALIS19T is designed with a ball mount that is 18" from the ground on the 2020 Hyundai Palisade. They test fit their hitches so that the ball mount is 18" from the ground because that is the most common coupler height. It sounds like your boat trailer will be perfectly level with the ball mount that comes with the Stealth Hitches Trailer Hitch for the Palisade. The best feature about the Stealth hitch is that...
    view full answer...

  • Does Curt Hitch Require Stabilizer Strap for 2019 Hyundai Kona
  • Yes it still holds true (as of 2/2020) that you need to use the Curt Cam Buckle Stabilizing Strap for Hitch # 18050 when carrying any non-trailer loads, or loads not supported by tires like bike racks and cargo carriers with Curt Trailer Hitch Receiver # C11529. The Draw-Tite Sportframe Trailer Hitch Receiver # 24976 does not require any additional straps or support, and that is why I would recommend it as well. Both hitches have the same weight ratings, and have a very similar design...
    view full answer...

  • Comparing the Curt Trailer Hitch Receiver Part C23FR and Part CU56FR for a 2020 Ford Escape
  • The Curt Trailer Hitch Receiver part # C23FR and part # CU56FR are virtually identical. They are both bolt-on USA made options which fit a 2020 Ford Escape. The former has a few small cuts in the flange which will accommodate hybrid models but it will also fit non-hybrid models as well. Therefore, I recommend going with the most cost effective option as they are both fits for a non-hybrid model. If you'll be towing don't forget the T-One Vehicle Wiring Harness part # TE54FR and etrailer...
    view full answer...

  • Best Trailer Hitch for a 2020 Kia Telluride
  • For a trailer hitch, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT32RR for 2020 Kia Telluride which is a direct bolt-on fit so no permanent modifications will be needed. It has a hidden design so you won't see the bulky cross tube. Furthermore, it has has a duller powder coated finished when compared to some other options so it's going to blend it with the vehicle more giving the best overall look. In order to complete your towing set-up up you will also need the...
    view full answer...

  • Comparing Curt & Draw-Tite Trailer Hitch Receivers for 2020 Chevy Equinox
  • There is very little actual difference between the two trailer hitch receivers that fit your 2020 Chevy Equinox (non-diesel model) As you can see by the accompanying comparison photo I made for you, the Curt Trailer Hitch Receiver # C77FR and Draw-Tite Trailer Hitch Receiver # 76419 have concealed crosstubes, which is a nice look for your Equinox, and have the same 4,500 lb towing and 675 lb tongue weight capacity. The biggest difference is actually in the installation, with the...
    view full answer...

  • Trailer Wiring Harness Fit For 2021 Toyota Venza
  • We actually do have a trailer wiring harness that is a fit for your 2021 Toyota Venza, but since it was redesigned for the 2021 model year, the part number you mentioned won't work. Instead, the exact wiring harness that I verified from the manufacturer, Curt, that fits your '21 Venza is the following: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C57ER This will be exactly what you need for your 2021 Venza in order to hook up your trailer lights when...
    view full answer...

  • Trailer Hitch for 2019 Toyota Highlander LE Plus With Full Size Spare Tire on Aluminum Rim
  • While we do offer outstanding trailer hitches for your 2019 Toyota Highlander LE Plus, the etrailer.com Trailer Hitch # E98844 will not work because the width of the aluminum rim on your full-size spare is simply too wide to allow this hitch to fit. It is likely that none of the reviews mention this because those that have that rim, which I believe is standard on the LE Plus, have gone a different direction in their choice of trailer hitch, which would be the options from Draw-Tite. Both...
    view full answer...

  • Comparison of Class III Hitches Available for 2020 Nissan Rogue
  • All three hitches are compatible with your vehicle. If the install procedure and how the hitches fit on the vehicle are compared, the etrailer # e98846, Draw-Tite # 75902 and Curt # C13204 are for the most part identical. The Curt and the Draw-Tite # 75902 feature a shiny powder coat finish while the etrailer model has a matte, non-shiny finish. Purely a matter of personal preference. The Curt and etrailer models have the same 3500 lb towing/525 lb tongue weight capacity while the...
    view full answer...

  • Most Hidden and Best Ground Clearance Hitch for 2019 Volkswagen Atlas
  • Based on what you described wanting the best hitch solution we have for your 2019 Volkswagen Atlas is the EcoHitch part # 306-X7362 as it is the least visible option and offers best ground clearance. Instead of having the hitch tube under the rear bumper this comes out through the lower fascia section to give you much better ground clearance and also a better overall look. The first picture I attached shows the EcoHitch and the second shows the Draw Tite # 76176.
    view full answer...

  • Trailer Hitch Wiring Harness Recommendation for 2021 Hyundai Palisade
  • Because there haven't been any substantial changes in the 2021 Palisade that would affect the wiring harness fit, the fit for the 2020 model carries over to the 2021 model year. I'd recommend the Tekonsha # 118784. The Curt Class III # C13427 hitch is also a fit for the 2021 model. For a ball mount, I'd recommend part # D-28 and the # PC3 hitch pin. For a 1-7/8 inch trailer ball, use # 19261 or # 63845 for a 2 inch. I've linked to an installation video for the hitch you'd looked...
    view full answer...

  • Comparing Curt and Draw-Tite Trailer Hitches for 2020 GMC Acadia
  • The Curt Trailer Hitch Receiver part # C13293 and the Draw-Tite Trailer Hitch Receiver part # 76023 are both excellent options for a 2020 GMC Acadia. That said, there are some distinct differences. The Curt hitch (see photo one) hangs below the rear bumper whereas the Draw-Tite hitch (see photo two) sits inside the rear bumper cutout. However, the Curt hitch because it hangs below the rear bumper is much easier to install than the Draw-Tite hitch which sits inside the bumper cutout. I recommend...
    view full answer...

  • Is Trimming Needed to Install Trailer Hitch Receiver on 2019 Volkswagen Golf GTI
  • Only the Draw-Tite Trailer Hitch Receiver # 24979 requires any trimming of your 2019 Volkswagen Golf GTI, which leaves you a couple of options for hitches that require no trimming at all. The Curt Trailer Hitch Receiver # C11412 (1-1/4" receiver), along with the EcoHitch Stealth Trailer Hitch Receiver # 306-X7375 (2" receiver) and # 306-X7376 (1-1/4" receiver) can be installed without any trimming needed. The best option for your '19 VW Golf GTI is the EcoHitch Stealth Trailer Hitch...
    view full answer...

  • Best Trailer Hitch for a 2021 Subaru Outback Wagon
  • I have some great trailer hitch options for a 2021 Subaru Outback Wagon, the Curt Trailer Hitch Receiver part # C67JR and the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT73RR. The Curt Hitch looks better installed as it has a hidden cross tube which will also give more ground clearance. The kicker is that it's harder to install than the Draw-Tite because you have to remove part of the rear bumper. The Draw-Tite is easier to install as you don't have to remove the rear bumper but...
    view full answer...

  • How To Tell If a Ford Transit Has the Tow Package and Parts Needed To Add It
  • The Ford Transit if equipped with the factory tow package would have came with both a trailer hitch and trailer connector and they would both be located directly under the rear bumper so odds are you do not have either because they are not hard to locate. The factory tow package was also not a very common option but I can provide you with everything to add this on your own at a fraction of the price. The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75912 is a confirmed fit for a...
    view full answer...

  • Recommended Concealed Trailer Hitch Receiver for 2021 Subaru Forester
  • We can get your 2021 Subaru Forester set up with a trailer hitch that has a concealed crosstube, and there are two that fit your vehicle: - EcoHitch Hidden Trailer Hitch Receiver # 306-X7391 - Curt Trailer Hitch Receive # C47HR These hitches are similar in many ways, but between the two I recommend going with the Curt hitch. The reason for that is because it is more budget-friendly while still offering you all the same benefits of the EcoHitch. The only differences, aside from...
    view full answer...

  • Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
  • I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation, which is the Curt Class III # C13410. First off, all the hitches for your Subaru can be pretty easily broken down into two categories in terms of design; hidden and non-hidden. The Curt # C13410 and Draw-Tite # 76227 both feature a 2" receiver...
    view full answer...

  • Comparing Curt and Draw Tite Trailer Hitches for 2019 GMC Acadia
  • We have two hitch options for your 2019 GMC Acadia. We have the more hidden but harder to install Draw Tite part # 76023 and the easier to install but more visible Curt # C13293. It really comes down to what you value the most. If you want a shorter install time that's less invasive you should go with the Curt. But if you are one of those people who hates the look of a hitch hanging off the back of a vehicle the Draw Tite is easily the way to go as it allows you to reinstall the rear bumper...
    view full answer...

  • Best Hitch For 2018 Chrysler Pacifica and 4-Bike Platform Rack
  • Yes Karine, we are still here to help! For the 2018 Chrysler Pacifica Hybrid, I recommend the Curt Trailer Hitch Receiver part # C13383 because it is a 2" hitch that fits the Hybrid model and has a more durable powder coat finish compared to some of the other options. Using a 2" hitch opens up more bike rack and accessory options compared to a 1-1/4" hitch. I also find the photos in the Curt installation instructions to be easier to follow. For the 4 bike rack the best option is a platform...
    view full answer...

  • Best Hitch for 2007 Lexus RX 350
  • The three hitch options for your 2007 Lexus RX 350 - etrailer # e98857, Curt # 13530 and Draw-Tite # 75153 - all share identical capacities and will install in the same way. All include the mounting hardware. From these choices my preference is the etrailer model # E98857 you referenced. I like this one because it is USA-made and has a subtle matte finish powder coat rather than a high gloss finish, so it will not distract as much from the car's own appearance. Please check out the photo...
    view full answer...

  • Trailer Hitch and 4 Bike Rack Recommendation for 2017 Toyota Sienna
  • Using a hitch mounted bike rack or cargo carrier isn't technically towing so if your owners manual say "no towing" that doesn't mean you couldn't use a hitch rack. The trailer hitch I recommend for your 2017 Toyota Sienna is the etrailer.com hitch part # E98853 which is a 2 inch hitch that has a concealed crosstube that allows it to be less visible. 2 inch hitches have higher capacities than 1-1/4 inch hitches which will be very helpful when carrying a 4 bike rack as they can be on the...
    view full answer...

  • Hitch and Cargo Carrier For 2019 Nissan Murano
  • Yes, the etrailer.com hitch part # E98907 is the same design as the Curt hitch part # C13205 available for the 2019 Nissan Murano except the etrailer.com hitch is matte black and the Curt is glossy. I have attached photos of the Curt hitch on a 2018 Nissan Murano since we have not yet had a chance to install a hitch on a 2019. The Curt hitch will fit the same as the etrailer version. The etrailer.com hitch part # E98907 has a 350 lb tongue weight capacity but you do not want to exceed...
    view full answer...

  • Comparing Curt and Draw-Tite Trailer Hitches for a 2019 Subaru Forester
  • The initial differences in the trailer hitches available for your 2019 Subaru Forester is that some of them have 1-1/4" receivers while others have 2" receivers. Going with the larger 2" receivers is always recommended because it opens up more opportunities for accessories that can be used. With that being said, the differences between the Curt # C13409 and Draw-Tite # 76271 are that the Curt trailer hitches tend to have better welds and a thicker powder coat for better protection but...
    view full answer...

  • Comparing Curt Trailer Hitch Receivers for 2020 Mazda CX-5
  • The installation and fit of the two Curt trailer hitches that fit your 2020 Mazda CX-5 are exactly the same; I did a side-by-side comparison of the linked installation instructions and there is no difference at all between them. So the only difference is the size of the receivers: - 2 Inch Receiver: Curt Trailer Hitch Receiver # C13315 - 1-1/4 Inch Receiver: Curt Trailer Hitch Receiver # C12170 Between these two I highly recommend the Curt Trailer Hitch Receiver # C13315 with the...
    view full answer...

  • Comparing the Curt Hitch C13409 and Draw-Tite Hitch for a 2019 Subaru Forester
  • The best trailer hitch we have for your 2019 Subaru Forester is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76271. The reason that this is the best trailer hitch for you is because it is a custom fit which means no cutting or drilling is required. It has a class III, 2" receiver tube opening and is rated for a trailer up to 3,500 lbs. It also has a durable black powder coated finish and comes with a lifetime warranty. The other trailer hitch option we have for you is the Curt...
    view full answer...

  • Differences Between etrailer Brand and Curt Trailer Hitches for 2020 Chevy Colorado
  • The differences between the Curt # C13203 and the etrailer branded # e98909 are primarily cosmetic. Both hitches would be mainly concealed behind the bumper, with only the receiver tube and the safety chain hooks being visible. The Curt uses a round tube crossbar with a glossy finish, the etrailer brand hitch uses a square crossbar with a matte finish. The cosmetic appearance really won't matter much as most of the hitch is concealed anyway. The Curt hitch has s higher capacity than...
    view full answer...

  • Choosing Between Curt C15312 and C15313 Hitches for 2006 GMC Sierra 3500
  • The correct trailer hitch for your 2006 GMC Sierra 3500 SLT Crew Cab is the Curt Trailer Hitch Receiver # C15312. This American made extra heavy duty class V receiver is compatible with your factory step bumper shown in the photo you provided. It has a towing capacity of 16,000 lbd and a max tongue weight limit of 2,400 lbs, perfectly equipped to tow your 14,000 trailer. I have attached a photo of the # C15312 installed on a similar year Silverado with the same style bumper to give you...
    view full answer...

  • Trailer Hitch for 2006 Dodge Sprinter That Fits Around Spare Tire
  • The spare tire retainer would almost certainly interfere with installing the # 75210, but we do have a hitch that is positioned a bit differently so it would fit perfectly. The Curt # 13250 class III hitch will avoid the spare tire retainer, as shown in the provided photo.
    view full answer...

  • Best Trailer Hitch and Bike Rack for a 2020 Tesla 3
  • In order to use a hitch mounted bike rack on a 2020 Tesla 3 you'll need a trailer hitch to start and for this I recommend the Curt Trailer Hitch Receiver part # C45FR which is a great bolt-on option. The Curt hitch has a hidden design so it won't stand out on the back of the vehicle and it has the larger receiver tube opening so you will have a much wider variety of hitch mounted accessories to choose from such as bike racks or cargo carriers. For a bike rack, I really like the Kuat...
    view full answer...

  • Comparing Draw-Tite and Curt Trailer Hitches for 2020 Ford EcoSport
  • That is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them. Both the Draw-Tite Trailer Hitch # 36660 and Curt Trailer Hitch # C12188 are a fit for your '20 EcoSport and have the same 3,500 lb towing capacity, 350 lb tongue weight capacity and even install the same way. Each hitch is a bolt-on installation that does not require any type of drilling to install on...
    view full answer...

  • Wiring Recommendations for 2020 Hyundai Palisade Limited
  • For your 2020 Hyundai Palisade Limited edition you will need a wiring kit to transfer the light signals to your trailer, the pre-wiring provides a plug for the trailer wiring to hook up. I recommend T-One Vehicle Wiring Harness for Factory Tow Package # 118784. It provides a 4 way flat trailer connector and hooks directly into the tow package plug on the underside of your Palisade. It is a 1 piece, or 1 end connector, however there are adapters that will allow you to have both a 7 and 4...
    view full answer...

  • Trailer Hitch Receiver Fits for 2020 Subaru Forester
  • There are a number of trailer hitches that fit your 2020 Subaru Forester, with options that have a hidden crosstube, visible crosstube and different receiver sizes, and since there are so many options, I'll list out what fits and what the best options are for your '20 Forester. Let's start with fits: - Class II with 1-1/4" Receiver: Draw-Tite Trailer Hitch # 36671 and Curt Trailer Hitch # C12198 - Class III with 2" Receiver: Draw-Tite Trailer Hitch # 76271, EcoHitch Hidden Trailer...
    view full answer...

  • Trailer Hitch Fits for 2019 Chevy Silverado 1500
  • I can tell you exactly which trailer hitches fit your new body style of 2019 Chevy Silverado 1500, and there are two options depending on if you have the factory hitch or not, though neither of the hitches are a Class IV square tube hitch. The only trailer hitches that fit your 2019 Chevy Silverado are: - If you do NOT have the factory trailer hitch receiver: Curt Trailer Hitch Receiver # C13393 - If you DO have the factory trailer hitch receiver: Curt Trailer Hitch Receiver # C15307 The...
    view full answer...

  • Trailer Hitch and Wiring Recommendation for a 2020 Jeep Cherokee Latitude
  • I recommend installing the Draw-Tite Max-Frame Trailer Hitch Receiver # 75998 on your 2020 Jeep Cherokee Latitude because it has more of a concealed look than the Curt # C13395 so it looks more like an OEM hitch. Then for wiring I recommend the T-One # 118779 because we have found their wiring to be the most reliable when it comes to the converter box. We actually had the opportunity to install both of these on a 2019 Jeep Cherokee so I have attached both install videos as well as...
    view full answer...

  • Recommended Trailer Hitch for a 2019 Lexus RX 350
  • The trailer hitch I recommend for a 2019 Lexus RX 350 is the Curt Trailer Hitch Receiver part # C13272 which is a fit for all models even the F-Sport. The Curt hitch offers a complete bolt-on installation with no cutting or drilling required. Therefore, the Curt hitch is very easy to install and should only take around thirty minutes or so. The best part of all is that the Curt hitch has a hidden cross tube which you can see in the attached photo and this means that only the receiver tube...
    view full answer...

  • Trailer Hitch Fit for 2019 Mercedes-Benz Sprinter 2500 with 170 Inch Wheelbase and Standard Bumper
  • There isn't going to be any noticeable difference in the fit between the Draw-Tite Trailer Hitch # 75549 and Curt Trailer Hitch # C13388 that fit your 2019 Mercedes-Benz Sprinter 2500 with a 170 inch wheelbase and standard bumper. The reason for that is both hitches install in the exact same spot on the frame, and both will be about flush with the bumper on your Sprinter. Both hitches have a 6,000 lb towing capacity and 600 lb tongue weight capacity but the biggest differences are that...
    view full answer...

  • Best Trailer Hitch, Cargo Carrier and Cargo Bag for 2018 Infiniti QX60
  • We have all the best parts to add a hitch, cargo carrier and cargo bag to your 2018 Infiniti QX60, and let's start with the hitch. The best hitch for your 2018 Infiniti QX60 is the Draw-Tite Trailer Hitch Receiver # 76031 because it is has the most ground clearance and bumper clearance of any hitch for your car. This means your cargo carrier is going to be as high off the ground as it can be with this hitch over any other. I have added a photo and a link to a video install on an '18...
    view full answer...

  • Comparing Draw-Tite Trailer Hitch and EcoHitch Trailer Hitch for 2016 Tesla Model S
  • Good question and there are a couple of key differences between the Draw-Tite Trailer Hitch Receiver # 24958 and the EcoHitch Stealth Trailer Hitch Receiver # 306-X7201 which fit your 2016 Tesla Model S, which I'll list for you: - Materials: This is the biggest reason for the price difference between the two, with the Draw-Tite being made just from steel, but the EcoHitch being constructed from an alloy which consists of a combination of recycled aluminum, steel, and stainless steel....
    view full answer...

  • Trailer Hitch Recommendation for 2020 Acura RDX
  • The hitch I recommend for your 2020 Acura RDX is the Class III Draw Tite part # 76268 as it has higher towing capacities than the Class II hitch available for your vehicle # 36114 which will help with towing and it installs easily. You'll also need the Tekonsha kit part # 118800 which installs easily and has a very reliable converter box. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
    view full answer...

  • Trailer Hitch Recommendation for 2020 Jeep Cherokee Towing Camper Trailer
  • The Curt hitch I recommend for your 2020 Jeep Cherokee is the part # C13395. This has plenty of towing capacity for your vehicle at 4,500 lbs trailer weight, is mostly hidden, and has the quickest install time listed of the options that fit your vehicle. I attached a picture and install video for this for you to check out as well. You'll need trailer wiring too so for that I recommend the Tekonsha kit part # 118779 which is going to install easily and comes with a very reliable converter...
    view full answer...

  • Concealed vs. Completely Hidden Trailer Hitch for 2021 Subaru Crosstrek
  • You are on the money with the differences between the trailer hitch receivers that fit your 2021 Subaru Crosstrek in regards to completely hidden vs. concealed crosstube. The completely hidden option - the EcoHitch Stealth Trailer Hitch Receiver # 306-X7365 - simply has receiver that you can remove, which means that it will be exactly like you don't have a hitch on at all if you aren't using it. The concealed crosstube options - the Curt Trailer Hitch Receiver # C13382 and etrailer...
    view full answer...

  • Trailer Hitch Recommendation for 2019 Honda Passport Hitch with Best Ground/Bumper Clearance
  • We haven't yet had the chance to install either the Draw-Tite # 76290 or the Curt # C13421 on a 2019 Honda Passport, so those measurements aren't available to me, unfortunately. That being said, based on the photos I attached comparing the two, the receiver tube on the Draw-Tite hitch appears to be slightly higher and slightly shorter than the receiver tube on the Curt hitch. So, if you're looking for a hitch with the best ground clearance and that doesn't stick out much past the bumper,...
    view full answer...

  • Trailer Wiring Harness for 2017 BMW X5
  • For your 2017 BMW X5 we do have trailer lighting harnesses like the Tekonsha part # TK47FR which plugs into the vehicle taillight harnesses for an easy install.
    view full answer...

  • Recommended Trailer Hitch for a 2020 Subaru Outback
  • The trailer hitch I recommend for a 2020 Subaru Outback is the etrailer Trailer Hitch Receiver part # e65ZR. The etrailer Trailer Hitch is a custom, bolt-on fit with no drilling required so there are no major permanent modifications needed. The etrailer Trailer Hitch has a hidden design so only the receiver tube will be present once installed which makes for the best look and gives the best ground clearance. I have attached a photo for you. The best part of all is that there are no special...
    view full answer...