12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack. Momentary-on/off/momentary-on switch assembly. 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC.

JR Products U-Post regulator bracket mounts 1 LP gas regulator on threaded tank rod.

These sensors let you monitor 2 additional tires with your PressurePro FX TPMS, or replace lost or damaged sensors. Waterproof tire sensors are well-suited for boat trailers.

Thick wall vent latches replace worn or damaged latches on your RV refrigerator exterior or interior converter doors. Works with walls up to 3/16" thick. Includes 2 latches.

Dimmer and on/off switch for controlling LED lights and other applications powered by your battery with electrodes designed to function in extreme temperatures and protect against voltage spikes. 15 Amp, 12V DC.

Thin wall vent latches replace worn or damaged latches on your RV refrigerator exterior or interior converter doors. Works with walls up to 1/16" thick. Includes 2 latches.

JR Products vent installation kit for aluminum roof installations and repairs of roof vents, side-mount vents, plumbing stacks, or refrigerator vents. Includes 36 screws and 8' of putty tape.

Use this permanent bypass valve when winterizing your RV to keep the antifreeze in your RV's water lines and out of your water heater tank. Valve allows fast, easy activation each winter. Lead-free brass valve won't contaminate your water.

JR Products threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan.

Double on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 2-7/16" wide.

Replaces the door catch on your RV sliding mirror door. Works as a universal fit for both small and large catches.

Single momentary-on/off/momentary-on switch assembly is water resistant. SPDT, 20 amps at 125V AC, 10 amps at 250V AC, 12 amps at 125V AC 3/4 hp, 10 amps at 227V AC 3/4 hp, 30 amps at 14V DC.

Single momentary-on/off/momentary-on switch assembly replaces a mini-momentary switch for your 5th-wheel or tongue jack. DPDT, 13 amps at 125V AC, 10 amps at 250V AC, 1/2 hp at 125-250V AC, 5 amps at 14V (T).

Deluxe entry door assist handle offers stability and convenience as you climb into and out of your RV. Padded rubber grip provides added comfort. Measures 3-9/16" deep and 19-5/16" between mounting holes.

Replaces the bottom wardrobe door guide for your RV closet doors. Works as a universal factory replacement.

Dimmer and on/off switch for controlling lights and other applications (LED not recommended) powered by your battery. Electrodes are designed to function in extreme temperatures and protect against voltage spikes. 15 Amp, 12V DC.

Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V, 12 amps at 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V DC. Fits cutouts measuring 1-1/8" tall x 1/2" wide.

Foil covered heater is used to prevent your RV fresh water or septic tank from freezing. Built-in thermostat automatically turns on when the temperature drops below 34-degrees F. Measures 30" long x 13" wide with a 24" ground wire.

JR Products vent crank replaces 1 worn or broken vent crank with a 1" long shaft.

Replaces the faceplate for your single RV switch. Bezel design allows more space for thin wall applications. Switch dimensions measure 1-1/8" tall x 9/16" wide.

Replacement key fits RV hatch doors from most manufacturers. Includes 2 standard J236 keys.

Double on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 2-7/16" wide.

Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 1-1/4" wide.

JR Products threaded LP rod is used to securely mount your LP tanks to your RV LP tank pan.