Replaces the power switch on your electric A-frame jack with footplate (EJ-3520-BBX).

Replaces the light switch on your electric A-frame trailer jack with footplate (EJ-3520-BBX). Includes 1 light switch.

Replaces the breakaway switch from your Bright Way trailer breakaway kit. Includes 1 breakaway switch, cable, and pin.

Replaces the step control module for your Lippert Components powered Tread Lite RV steps (LC353542, LC353543, LC353620, or LC353621).

Replaces the power switch for your Lippert Components high-speed power stabilizer jack (LC369774). White color.

This replacement switch works with the Tekonsha Push to Test breakaway kit (50-85-313) and the Tekonsha clamp-on breakaway kit (1026).

Replaces the door sensor used to override the automatic retraction on your Kwikee powered RV entry steps. Rectangle tabs mount on the door and doorframe. Wire to steps to stop retraction when they come into contact.

Double-panel on/off switch for your Dometic water heater. Operates both the gas burner and the electric heating element in your water heater. Mounts to the wall in your coach for easy access.

12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack. Momentary-on/off/momentary-on switch assembly. 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC.

Replace the damaged door switch that came with your single, double, or triple electric Lippert Coach Step or Stromberg Carlson sliding step. This 2-piece switch installs on your RV's door and its frame with the included hardware.

Replaces extend and retract switch for Bulldog powered drive A-frame trailer jacks.

Replaces the switch used to extend and retract your Lippert electric trailer jack (LC285318). Requires original hardware for installation.

Replace the control switch for your Lippert Components aluminum hydraulic landing gear. Wires into your existing hydraulic landing gear with the included wires. White faceplate and black switch.

Replaces the door sensor used to override the automatic retraction on your Kwikee powered RV entry steps. Round tabs mount on the door and doorframe. Wire to steps to stop retraction when they come into contact.

Replaces the switch that came with your Curt trailer breakway kit. This switch signals your breakaway kit to activate your trailer's electric brakes in the event that your trailer accidently separates from your tow vehicle.

Replaces the switch needed to extend or retract your Solera 18V Power RV awning (LC729486, LC729505, LC729517, LC730492, LC730510, or LC730523).

Replaces the rocker switch used to extend and retract your Kwikee powered RV entry steps when activated. Includes power switch and mounting plate. Wiring and installation hardware not included.

Replaces the rocker switch used to override the automatic retraction feature on your Kwikee powered RV entry steps. Switch and mounting plate install inside the RV and wire to steps to stop the retraction when activated.

Double on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 2-7/16" wide.

Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 3/4 hp at 125V - 250V AC, 12 amps at 250V AC, 10 amps at 14V DC. Fits cutouts measuring 1-1/8" tall x 9/16" wide.

Dimmer and on/off switch for controlling LED lights and other applications powered by your battery with electrodes designed to function in extreme temperatures and protect against voltage spikes. 15 Amp, 12V DC.

Replaces the door sensor tabs used to activate your Kwikee powered RV entry steps when the door opens and closes. Rectangle tabs mount on the door and doorframe. Wire (not included) to steps to signal extension and retraction when they touch.