This adapter module allows you to control your Dexter Axle or Titan BrakeRite (T4813100, T4813102, T482250, or T4835700) electric-over-hydraulic brake actuator with your factory Ford, GMC, or Chevy brake controller.

This replacement inner member slide fits into existing outer member housings of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with tandem-axle trailers with hydraulic disc brakes.

This replacement master cylinder fits Titan Aero 7500 trailer brake actuators for disc brakes.

Replaces or adds an inline reverse lockout solenoid to Demco DA66B hydraulic trailer brake actuator. Non-bypass design allows you to thread the solenoid valve into your master cylinder for a hassle-free installation.

Replacement assembly fits Titan Model 60 brake actuators.

Replaces the flat black plastic fill cap for your Titan 7,500-lb brake actuator (T4606520, T4500600, T4839100, T4839120, T4839300, or T4839400).

Replaces the master cylinder for your Toledo drum brake actuator.

Replacement fill cap fits your Dexter electric-over-hydraulic trailer brake actuator (K71-650 or K71-651). Fill cap with gasket forms a tight seal preventing leaks and fluid loss.

Replaces the coupler pin on your Titan/UFP brake actuator with an over-center coupler latch (T4839100, T4500600, T4839120, and T4839000) so that you can secure the actuator to your hitch ball. Includes cable and snap ring.

Replaces the consumer lockout key for the brake lockout on your Dexter Axle brake actuator. Works with A-60, A-84, XR84, and new Titan Aero model actuators.

This replacement 2-5/16" coupler slides into your Titan Model 10 trailer brake actuator. Primed finish.

Use your Gen 6 or later HydraStar electric-over-hydraulic brake actuator with your factory Ford (model years 2007 - 2008) or Chevy (model years 2007 - current) electric trailer brake controller by installing this adapter.

This 1/4" pin lock inserts through the latch on your surge brake actuator or standard ball coupler to keep your trailer coupler secured on your hitch ball. Carbon steel construction with black e-coat resists corrosion.

Corrosion-resistant cover bolts onto the rear of your Titan Model 60 actuator to protect the electric reverse lockout valve.

Replaces the inner slide assembly for Titan Model 20 brake actuators with 2-5/16" drop couplers.

Replaces the inner slide assembly and coupler for your Model 10 Titan actuator.

Easily and securely mount your BrakeRite actuator box to your trailer with this angled bracket.

Master cylinder with inline solenoid installs in your Demco actuator and wires into your tow vehicle so that your trailer brakes won't activate when you shift your vehicle into reverse. For use with Demco hydraulic surge-type drum brake actuator.

Replaces the inner slide channel for your Titan Model 6 bolt-on adjustable-channel actuator. Sturdy steel construction.

Corrosion-resistant cover bolts onto the rear of your Titan Model 10 or Model 20 actuator to protect the electric reverse lockout valve.