Designed for TorkLift frame-mounted tie-down systems, these stainless steel turnbuckles have internal springs to help reduce stress on tie-down points. Single-piece turnbuckles offer a clean, sleek look. Offers a reach of 35" to 45".

The built-in, quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with frame-mounted camper tie-downs. Turnbuckles extend from 25" to 43".

Stainless steel turnbuckles allow you to firmly secure your truck bed camper to your tie-down system. Internal springs on front turnbuckles help to reduce stress on tie-down points.

Basic kit lets you easily secure the front or rear of your truck bed camper to your TorkLift frame-mounted tie-downs. Spring-loaded barrels help minimize stress on tie-down points. Sturdy steel turnbuckles let you firmly tighten down your setup.

Hold-down kit lets you secure your truck bed camper to your Brophy bed-mounted tie-downs (TDSF, HSSF, HSAB, HSBP, or HSCP - sold separately). Sturdy turnbuckles let you firmly tighten down your setup. Includes 4 turnbuckles, chains, and S-hooks.

Lock down the turnbuckles on your camper tie-down system with these sturdy locks. Pin locks replace the pins that hold your lever-action TorkLift FastGun or Derringer handles in the closed position.

The built-in levers on these turnbuckles allow you to quickly and easily secure your truck bed camper to your tie-down system. No twisting or manual adjustments needed. Internal springs help to reduce stress on tie-down points.

The built-in, quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with bed-mounted camper tie-downs. Turnbuckles extend from 14" to 21-1/2".

The Wobble Stopper helps eliminate sway and reduces stress on your camper's frame. Clamp one end of each stabilizing strut onto your round camper jack and attach the other end to your camper's frame with the locking, lever-action handle.

Add these quick-release levers to your standard HappiJac turnbuckles to get quick, simple tightening action. Compatible with all turnbuckles that have a 1/2" threaded rod.

Easily and safely store your camper by using this kit to build a sturdy stand. The supplied parts create 2 saw-horse-type supports that each measure 30" tall x 50" long. Powder coated steel brackets, 2x6 lumber, and hardware included.

Thread these handles onto the turnbuckles on your camper tie-down system so that you can quickly and easily tighten the system down. Quick-disconnect design lets you release tension on your turnbuckles by simply flipping a lever.

Replaces 1 rear turnbuckle for your HappiJac Qwik-Load turnbuckle set. Turnbuckle is used to secure the camper to a tie-down point on your truck's bumper. 24" Threaded hook.

Quick-release levers make it fast and easy to secure your camper to your vehicle. Short turnbuckles extend from 14" to 21-1/2" for bed-mounted tie-downs. Long turnbuckles extend from 25" to 43" to fit frame-mounted tie-downs.

Replaces the front anchor plates for your HappiJac custom tie-downs (LC182910). Durable steel plates create attachment points for securing your camper to your truck bed. Includes 2 plates, spacer kit, and hardware.

Quick-release levers make it fast and easy to secure your camper to your vehicle. Short turnbuckles extend from 14" to 21-1/2" for bed-mounted tie-downs. Long turnbuckles extend from 25" to 43" to fit frame-mounted tie-downs.

Replaces 1 rear stress-guard turnbuckle for your HappiJac custom camper tie-down system. Turnbuckle is used to secure the camper to a tie-down point on your truck's bumper. 24" Threaded hook.

The built-in, quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with frame-mounted camper tie-downs. Turnbuckles extend from 25" to 43".

Replaces the front anchor plates for your HappiJac custom tie-downs (LC182905). Durable steel plates create attachment points for securing your camper to your truck bed. Includes 2 plates, spacer kit, and hardware.

Replaces the threaded hook on your rear HappiJac standard or Qwik-Load turnbuckle. Zinc-plated steel construction resists corrosion. 24" Long.

The quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with frame-mounted camper tie-downs. Turnbuckles extend from 25" to 43". Includes 4 sturdy pin locks.

Replaces 1 front spring-loaded turnbuckle for your HappiJac custom camper tie-down system. Turnbuckle is used to secure the camper to a frame-mounted tie-down at the front of your truck's bed.11" Threaded hook.

The built-in, quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle. Designed for use with bed-mounted camper tie-downs. Turnbuckles extend from 14" to 21-1/2".

Keep dirt and grime out of the receivers of your camper tie-down system when it's not in use. This kit includes 4 sturdy vinyl caps to cover the front receivers and 4 durable foam blocks to plug the rear portions of the receivers.