Replaces the operator mechanism for your MaxxAir MaxxFan Plus or MaxxAir Deluxe powered lift roof vent.

Replaces the bow-tie bracket, motor, and blade for your Fan-Tastic Vent roof vent fan (FV800800, FV801200, FV801250, FV802250, FV803350, or FV807350).

Replaces the printed circuit board and switch for your MaxxFan roof vents (MA00A04301K).

Roof vent install kit allows you to properly mount your RV roof vent and create a waterproof seal. Kit includes 2 tubes of self-leveling sealant, 1 roll of butyl tape, 8 wood screws, and 30 sheet metal screws.

Replaces the lift arm for your Fan-Tastic Vent roof vent.

Custom fit, plastic interior trim piece creates an attractive inside appearance for Ventline Ventadome roof vents. Fits a range of sizes - from 4-7/8" to 6-1/4" - depending on roof thickness and Ventline vent model.

Use this 17-rpm auto-lift motor to replace the damaged one in a Fan-Tastic Vent B Series roof vent with a powered lift arm.

Garnish creates an attractive inside appearance for MaxxAir roof vents.

Replaces the roof vent component for your RV's original model 00-04900K MaxxAir MaxxFan Plus assembly. Works with your existing wall-mounted controller and garnish ring.

Use this 17-rpm auto-lift motor to replace the damaged one in a Fan-Tastic Vent B Series roof vent with a powered lift arm.

Allows heat generated by the fridge to escape from the interior of your camper. Installs on the roof of your RV over your refrigerator. Fits a 23-3/4" long x 6-3/4" wide cutout. Includes 1 black vent cap and base.

Replaces the fan motor for your Ventline models V2045, V2065, V2244, and V2265 exhaust fan.

Replaces the digital remote control for your Fan-Tastic Vent roof vent with 12-volt fan and powered lift (FV807350). Allows you to conveniently control the temperature and operate the fan. White color.

Custom fit, plastic interior trim piece creates an attractive inside appearance for Ventline Ventadome roof vents. Fits a range of sizes - from 4-7/8" to 6-1/4" - depending on roof thickness and Ventline vent model.

Replaces the 110V fan motor for your Ventline bathroom insert fans for motor homes and enclosed trailers with 50 CFM capacity (V2262-100 and V2244-100).

Allows heat generated by the fridge to escape from the interior of your camper. Installs on the roof of your RV over your refrigerator. Fits a 23-3/8" long x 6-1/2" wide cutout. Includes 1 white vent cap and base.

Replaces a broken gear motor on your Ventline Ventadome RV roof vent for motor homes and enclosed trailers. This gear motor provides the power to open and close the dome. It includes a small gear that drives a larger gear to operate the dome.

Replaces a damaged fan motor on your RV range hood or roof vent. If replacing an older model motor, a new fan blade (sold separately) is also required. Fits Ventline P, S0721, B, and T Series range hoods and Ventadome or Vanair roof vents.

Replaces a 110V fan motor for Ventline bathroom insert fans for motor homes and enclosed trailers with 50 CFM capacity (V2262-50 and V2244-50).

Replaces the keypad for your MaxxFan Deluxe roof vent (MA00-07000K or MA00-07500K).

Retractable vent shade with LEDs snaps flush into place over any RV roof vent with a garnish ring to give you a streamlined look. Reflective surface blocks heat and UV rays to keep your RV cooler in warm weather and protect your interior from fading.

Replaces a 110V fan motor for Ventline bathroom insert fans for motor homes and enclosed trailers with 100 CFM capacity (V2262-100 and V2244-100).

Replaces the 4-key wall control for your MaxxFan Plus and Deluxe models.

Add this bug screen to your MaxxAir FanMate vent cover to help keep insects and debris out of your RV or enclosed trailer. It snaps into place behind the louvered vent area on the back of the cover.