Upgrade your tandem-axle trailer's suspension with this hardware kit. Works with Equa-Flex equalizers rated between 3,000-lbs and 8,000-lbs.

Alignment and lift kit lets you raise your trailer or RV 1-1/4" - 2-1/4" to accommodate for increased heights of newer trucks. Shift axles up to 1/2" forward or rearward to correct misalignment. Uses existing suspension components.

Replaces 2 rubber equalizers for E-Z Flex heavy-duty rubber suspension system by Dexter Axle (K71-652-00).

Replaces 1 air bag for your Lippert Center Point by Trailair air ride suspension upgrade system (LC1565391 or LC1565401).

Replaces (1) 9/16" x 3-1/4" wet shoulder bolt for your Lippert Components Equa-Flex tandem axle suspension kit.

Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer.

Replaces (1) 9/16" x 3-3/4" wet shoulder bolt for your Lippert Components Equa-Flex tandem axle suspension kit.

Replaces 1 rubber equalizer for E-Z Flex heavy-duty rubber suspension system by Dexter Axle (K71-652-00).

Replaces the Correct Track axle hanger that was welded to the frame of your vehicle by the manufacturer.

Replaces 1 of the gas-powered shock absorbers in your Roadmaster Comfort Ride trailer suspension system.

Heavy-duty hanger can be configured to work as either a front, center, or rear hanger in your trailer's double-eye leaf spring suspension setup. Galvanized steel construction is great for marine use. Designed to bolt onto your trailer frame.

Replaces damaged or worn hardware used to install your Lippert Components Center Point suspension upgrade system (LC1565391 - sold separately).

Replaces the spring seat needed for your Dexter trailer springs over-under conversion kit (K71-384-00).

Replaces a standard shock to improve your ride.

Replaces a flange nut for your Dexter Axle trailer suspension kit. Works with EZ-Flex, heavy-duty, suspension, and tandem axle attaching parts kits.

Secure a wobble roller on your boat trailer with the help of this washer. It is constructed of zinc-plated steel and fits a 3/4" roller shaft.

Secure a wobble roller on your boat trailer with the help of this washer. It is constructed of zinc-plated steel and fits a 1-1/8" roller shaft.