An oval, black PVC grommet needed for flush mounting 6-1/2" oval lights. This PVC grommet gives shock mount protection that extends the life of the lamp. Along with the sealed light, a 3-wire pigtail is required to complete the installation.

This load resistor prevents the LED turn signal light on your truck or trailer from hyperflashing. Resistor has right-angle male PL-3 plug on one end and female PL-3 plug on the other end.

This rubber grommet allows you to flush mount a 2-1/2" diameter sealed trailer light. Protects lights against shock and vibration for extended life. Open back design provides easy access to wiring.

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Right-angle plug allows wires to run down from light instead of straight out the back. Designed for stop/tail/turn lights.

This 3-wire pigtail has a male plug on one end that pairs with the female connection on the back of your Optronics light. Color-coded wire lead is 10" long. Designed specifically for lights that provide stop, tail, and turn functions.

Replacement lens fits Bargman 86 Series wraparound clearance/side marker lights.

Black PVC grommet lets you install an Optronics A91 Series, AL82 Series, AL90 Series, AL91 Series, or AL191 Series trailer light. Recessed-mount design. Provides shock protection to extend the life of the lamp.

Replaces the tail light lens and side marker lens for your Optronics over 80" incandescent trailer light kit (TL16RK - sold separately). Also fits Optronics ST16, ST17, ST18, ST19, and ST27 series incandescent tail lights. Screw-on lens.

Replaces the amber lens for your Optronics MC32 or MCL32 Series trailer clearance or side marker light. Works with MC32AB, MC32ABB, MCL32AB, MCL32ABB, or MCL32ATB.

This lens replaces the red lens on your Command Electronics LED triple tail light. Works with 328-003-30LEM2. Simple screw-on installation.

Snap-on red lens replaces the lens for your Optronics clearance or side marker light. Fits MC32 and MCL32 series lights.

Replaces a rubber grommet for your 3/4" diameter trailer light. Allows you to flush-mount a 3/4" diameter light on your trailer.

Chrome trim ring provides a finished look for your Optronics STL73, STL78, STL88, STL178, or BUL78 Series trailer tail lights. Designed for grommet mount lights.

Replaces a lost or broken lens on your RVSTL61 and RVST61 tail light.

Replacement lens allows you to upgrade or replace the lens for your Optronics MCL0028 series clearance or side marker trailer light. Red lens works with MCL0028ABB.