Protect your electrical connections with this specialized formula that combats corrosion from water damage. Electrical Contact Grease comes in a 2 oz. tube.

Replaces the mounting bracket for your Hopkins 7- and 4- pole trailer connector socket (HM40975 or HM40975-11998).

Single on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V - 250V AC, 3/4 hp at 125V - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 1-1/4" wide.

LED light strip connector makes it easy to wire a section of LED light strip to any 12-volt power source. Snap-on design allows for easy connections.

Double on/off switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125 - 250V AC, 3/4 hp at 125 - 250V AC, 10 amps at 14V (T), 3 amps at 125V (L). Fits cutouts measuring 1-5/8" tall x 2-7/16" wide.

2-Piece metal housing with perpendicular mounting bracket. Cycling automatic reset.

LED light strip connector makes it easy to join 2 sections of Optronics LED light strips together. Snap-on design allows for easy connections.

In-line 50-amp Type I circuit breaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.

This on/off switch automatically turns your RV's compartment light on when the door opens and off when it closes. Mounts to door strut with included hardware. 42" Wire lead with 2 connectors plugs into compartment light.

Replaces the lens for your Gustafson Lighting RV scare light (GSL8123).

LED tube lights with 66 diodes upgrade or replace T8 fluorescent light bulbs to provide warm white light for RV, marine, and automotive applications. Compatible with dimmable fixtures. Built-in surge protection.

Single on/off 12V switch for controlling lights and other applications powered by your battery. SPST, 16 amps at 125V AC, 12 amps at 250V AC, 3/4 hp at 125-250V AC, 10 amps at 14V DC. Fits cutouts measuring 1.125" tall x 0.55" wide.

This single-pole, thermal circuit breaker features a continuous cycle with an automatic reset. Breaker prevents battery from draining and auxiliary application from overdrawing. Typical uses include brake controllers for four to eight brakes.

Round shade works on most ceiling light fixtures in your RV. Frosted white swirl glass shade softens the glare of the light.

Replaces the clear oval lens for your Optronics RV porch and utility light (RVPLL11CB or RVPLL13CB).

In-line 50-amp Type I circuit breaker cycles automatically and continuously during an over-current condition. Composite alloy material will bend and separate the contacts when an over-current situation occurs and return to the run mode as it cools.

Single reversing momentary-on/off/momentary-on switch assembly is water resistant. DPDT, 20 amps at 125V AC, 10 amps at 250V AC, 12 amps at 125V AC 3/4 hp, 10 amps at 277V AC 3/4 hp, 30 amps at 12V DC.

This red 2/0 gauge harness assembly connects multiple battery clusters. Overmolding protects your wiring and attached protective caps seal your connections. Made with 2/0 gauge PVC starter cable. Fits Group 31 batteries with up to 3/8" studs.