The Rectangular Boat Table - Surface Mount - 28" x 16" #315-DSH-KS has an ivory color so it's an off-white but not quite cream-colored. The base that comes with it is installed by putting mounting screws through the base…
The JIF Marine Rectangular Boat Table #315-DSH-KS that you referenced is going to work perfectly for your application. The black mounting base, once bolted to the floor, is the only component that will be permanently installed when setting up the…
We do! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B on your 2024 Chevy Silverado 1500 topper. To get this installed you'll have to put some holes in the topper for the rails, but it comes with sealant and…
Hello John. The Hot Dot LEDs #328-003-17A you were looking at are definitely a good option. Especially is you need something with the 2" center on center for the holes. We do have two other options for you to look at, take a look at the…
The majority of brake line installations we do in our shop match the first method you have in the photo, labeled "Branch". We also prefer to use rubber hoses as they are easier to work with and there won't be an issue if you…
Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.
Yes, if you wanted to cut down the length of the tracks of the Rhino-Rack Roof Rack System w/ 2 Sportz Crossbars #Y02-480B you certainly could. The bars come 54 inches in length and the tracks are 63 inches long.
Rhino-Rack does have a complete kit with shorter crossbars that still have the tracks for your truck cap. It is the Rhino-Rack Roof Rack System w/ 2 Vortex Aero Crossbars - Track Mount - Black - 54" Long #Y02-480B. If you want shorter bars than…
There really isn't a particular maximum trailer weight that is used to determine when brakes need to be added to both axles of a tandem axle setup. While I do still recommend checking your local laws, I am also not aware of any general laws that…
From what I have found, your T-23979 is the same as the Dexter 010-010-00 seal. This has a 2.125" inner diameter and 3.376" outer diameter. The correct replacement would be the Grease Seal - Double Lip - 2.125" ID - 3.376" OD -…
Yes we do carry the SeeLevel 709-2P with our part number #SE94VR. This is just the monitor you are looking for. The part #SE49VR that you mentioned includes the monitor but also sensors.
The Table Leg #315-DTX that comes with the Rectangular Boat Table #315-DSH-KF is 2" OD. The ends of the tube are tapered down to 1-7/8" OD for the Mounting Brackets #315-DTY and #JIF54FR.
(4)
(2)
Filter Results
