1. Home
2. Trailer Parts
3. Car Ramps
4. 3000 lbsx

I won't be able to confirm exactly what ramp you need as I have no sort of database to reference for this but we do have a wide selection of ramps to choose from such as the Gen-Y Hitch Aluminum Loading Ramp Set part #GY52YR. These ramps measure…

Hey Phil, We offer loading ramps like the Gen-Y Hitch Aluminum Loading Ramp Set #GY55NR, but I'm assuming you're wanting the heavier duty ramps that fold back up and stay on the trailer, right? If so you'll want to look to a trailer…

I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…

Hey Charlie, The Flint Hill Goods Easy Carry Trailer Ramps #FHG63ZR weigh in at 15.4 lbs a piece so they are really easy to maneuver around for sure!

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…

I do have a solution, but the #325-GH-R84 are not designed to work this way. Since they are designed to hook over the back edge of a trailer, you would drop off of the end where the hooks are onto the ramp of your 5th wheel. It would not be a smooth…

...ramp. The Stallion ramps are only rated for up to 3,000lbs for the set and a height up to 25" while the Flint Hill Goods is rated for up to 6,000lbs for the set of ramps and a maximum height of 16"....

We actually carry a replacement for the Dexter 8-259 Trailer Hub, it's the Easy Grease Trailer Idler Hub Assembly part #AKIHUB-545-2-EZ-2K.

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product…

Load range capacity varies based on the tire size and brand, so without knowing either, it's hard to say. For example, a load range D tire in size 145/80-12 has an average capacity of 1,220 lbs, while a load range C tire in size 185/80-13 has an…

Ideally, you'll want some of the hardware attaching the e-track to the trailer floor to also secure to the cross members as well as to the planks that make up the trailer floor. If that's not possible, I'd recommend using a backer plate…

I won't be able to confirm exactly what ramp you need as I have no sort of database to reference for this but we do have a wide selection of ramps to choose from such as the Gen-Y Hitch Aluminum Loading Ramp Set part #GY52YR. These ramps measure…

Hey Phil, We offer loading ramps like the Gen-Y Hitch Aluminum Loading Ramp Set #GY55NR, but I'm assuming you're wanting the heavier duty ramps that fold back up and stay on the trailer, right? If so you'll want to look to a trailer…

I have another option for you, but due to the length of the ramp you would not want to use the Aluminum Car Hauler Ramp Set - 48" x 14-1/2" #288-07501 any higher than 12" as it could cause the ramp to not be secure and will be a pretty…

Hey Charlie, The Flint Hill Goods Easy Carry Trailer Ramps #FHG63ZR weigh in at 15.4 lbs a piece so they are really easy to maneuver around for sure!

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading, but…

I do have a solution, but the #325-GH-R84 are not designed to work this way. Since they are designed to hook over the back edge of a trailer, you would drop off of the end where the hooks are onto the ramp of your 5th wheel. It would not be a smooth…

...ramp. The Stallion ramps are only rated for up to 3,000lbs for the set and a height up to 25" while the Flint Hill Goods is rated for up to 6,000lbs for the set of ramps and a maximum height of 16"....

We actually carry a replacement for the Dexter 8-259 Trailer Hub, it's the Easy Grease Trailer Idler Hub Assembly part #AKIHUB-545-2-EZ-2K.

The Stallion #288-07432-2 folding cargo ramps are manufactured in China. If you'd prefer a US made alternative, I'd recommend the Gen-Y #325-GH-R84 84 inch long aluminum loading ramps. If you click the provided link, you can see a product…

Load range capacity varies based on the tire size and brand, so without knowing either, it's hard to say. For example, a load range D tire in size 145/80-12 has an average capacity of 1,220 lbs, while a load range C tire in size 185/80-13 has an…

Ideally, you'll want some of the hardware attaching the e-track to the trailer floor to also secure to the cross members as well as to the planks that make up the trailer floor. If that's not possible, I'd recommend using a backer plate…