Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
Hi Bill; are you referring to the Replacement Car-Side Pushlock Connector for Demco Air Force One Air Jumper #SM6214? If not, please respond below in the comments. I am also attaching the installation manual for the Demco Air Force One #SM99243…
...You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank...
Hi Eric; based on the specs of your trailer I recommend the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET. It looks like the Office is the 30FB with an unloaded tongue weight of 900 lbs. Based on that and the GVWR of 8,800 lbs…
Yes, you can attach a LockNLoad platform to the bottom of the Yakima EasyRider Double Decker Trailer item #Y08129 but not that one because it's too wide. Instead you'll need the 84" Long x 49" Wide Yakima LockNLoad Platform Rack for…
Hello Greg, I cannot personally see any difference between the M40i and sDrive for the 2019 BMW X3. We haven't done an install on the M40i, so I can't say for sure what the difference would be regarding the #C99RV hitch and #SH46FR for…
Hey John, there's no reason you couldn't use the Blue Ox Wheel Chocks part #BLU47UR on all 4 wheels of your trailer as like a temporary lift. The pair alone has a 30k weight capacity as well so in that regard it would work great too.
The Firestone In-Cab Pressure Gauge #F2196 will work with the AirLift systems. If you can tell me the part number of which AirLift kit you have I can try and help you with that system if you'd like.
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
Hello Harlow, thanks for reaching out. We do have the Replacement Head #BXW4011 which fits the Blue Ox SwayPro Weight Distribution Systems. Regrettably we do not carry the bolts that go with this. Your will need grade 5 zinc-plated 3/4”-10 x 4” hex…
The Draw-Tite Max-Frame Trailer Hitch Receiver part #75600 which is a fit for a 2015 BMW X5 actually comes with the poly rivets that you'll need to use to reattach the fender trim. If you need the tool as well, we do carry one you can use for…
Hey Tom, There is a bike rack I highly recommend for your 2024 Toyota Crown and the Curt Trailer Hitch #C77ZV, which is the Saris Freedom Bike Rack for 2 Bikes #SA4412B. What I love about this rack is its unique combination of being easy to handle…
(1)
(9)
(1)
(1)
Filter Results
