The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
The first thing you'll need to flat tow your 2015 Chevy Malibu LS is a base plate kit like the Roadmaster part #RM-523178-5 that is a confirmed fit. In addition to the base plates, you will also need a compatible tow bar, safety cables,…
There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…
Hey Rich, yes you can use the Thule Epos Bike Rack for 2 Bikes #TH99XE with your 2021 GMC Sierra 2500, you're just going to have to use a hitch reducer #BWRHXA2182. This will reduce your 2.5" receiver to a 2" so…
Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.
You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy…
We have just what you're looking for with the Gen-Y Anti-Rattle Clamp for 2" Hitch Receivers #GY88XR. The sleeve acts as a wedge to take out play between your hitch receiver and extender. Although it does not not require a…
The correct replacement circuit board for your MaxxFan 7000k unit is the part #MA10A21275K that you referenced. The different letter in the part number is just a slight change they made but does not affect application.
It is not extremely uncommon for the hitch pin hole on a trailer hitch receiver to become oblong after frequent usage. This is usually attributed to frequent back and forth movement of the shank inside the receiver tube opening that in time will…
Hey Jason, thanks for reaching out! Yes, the Brophy Ball Mount for 2" Hitch #BH20 will work with the Curt RockerBall Shock Absorbing 2-5/16" Hitch Ball #C29FR perfectly!
Hey Brian, thanks for reaching out! Your 2012 Honda Pilot has a unibody frame and according to page 544 of your owner's manual Honda doesn't recommend you use on either. Since this is the case, I recommend installing the…
The Blue Ox Apollo Non-Binding Tow Bar #BX7470 is going to be the largest size we have to fit a 2-1/2" receiver. So you will at least need a 3" to 2-1/2" Adapter #C85JR. This will connect to the Base Plate…
(3)
(3)
(1)
(1)
(1)
(2)
(3)
(1)
Filter Results
