Yes, the Ventline Pinnacle Ducted RV Range Hood with Light #VE98SR can replace your existing High Pointe range hood. This has the same dimensions at 20" wide x 18" deep x 4-3/4" tall. There will be a small difference in the…

Sorry for any confusion Aaron, I can confirm that the 22" Wide Vent Hood #VE78SR is 18" deep as you can see in the picture below.

Hey Duke, the Ventline Pinnacle RV Range Hood part #VE33SR that you referenced will draw up to 5 amps at 12 volts.

The replacement motor for the Greystone RV Range Hood with Light - 12V - 24" Wide - Black Item #324-000087 is the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood Item #BVD0218-00. If you also need to replace the fan blade the…

I wasn't able to find anything that corresponds with the M55F115 22 part number you provided. I was able to find dimensions for a M-55F115-S which is 22" wide x 18" deep x 4-3/4" tall. I would double check but I'm guessing your…

You're correct that the Furrion Ducted RV Range Hood with Light #FHO23SACRBL rear vent is only 5-7/8" long x 3-1/4" tall, whereas our vents are all larger at 10-1/2" wide x 3-3/4" tall. Typically there will be some insulation…

While we do not have RV range hoods that are designed to vent through a microwave, there are still options available to you. If you are concerned with having to cut a hole in your trailer, then you can use something like the Furrion Range Hood - 12V…

The Triple LED Trailer Tail Light part #CE44VR is a pretty common OEM taillight used on motorhomes so as long as the style is the same as the one you have and the dimensions of 14" long x 6-7/8" tall x 1" deep are the same it should…

For the Furrion Ducted RV Range Hood with Light #FHO23SACRBL you're going to want to use the Ventline Exterior Wall Vent for RV Range Hood - Locking Damper #V2111-55. This vent will fit in 10-1/2" wide x 3-3/4" tall rough openings and…

Thank you for the photo! For your Ventline Range Hood PH CC0431-09 you're either going to need the motor #BVD0218-00 or the motor #BVD0218-00C. The first motor is for an unlisted range hood while the second motor is for a CSA range hood. To…

The Camco RV Refrigerator Vent Cover #CAM42163 is likely a fit for your roof vent base since it fits a base with a 5-1/4" x 24" base. These vent covers are designed specifically to fit Dometic and Norcold vents so you shouldn't have an…

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…