I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
The Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2580 isolates the front and rear suspension from each other. So the axles will not distribute the weight like it will with equalizer style spring systems. While this might not seem…
I do have a solution, but there are no handrails made specifically for the Lippert SolidStep RV Steps #LC791573. My recommendation is to install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR. This rail is 54" long and is going…
Sorry for any confusion that may have arose, but what you want is the U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles #APUBR-35. These are designed for 3 inch diameter, 8,000 lb axles and are compatible with the Roadmaster Comfort Ride Leaf…
You can get the longer U-bolts here; I checked with Roadmaster, and the 2630 are simply 7 inch long U-bolts, so you can use the following: - 3" Round Trailer U-Bolts (Qty 2) #SP01-060 These are 7 inches long so they are the same, and for a…
You would be an awesome candidate for the Roadmaster Comfort Ride System for 8k axles part #RM-2460-2580. This would do a great job providing additional suspension support but what you'll really like is the shocks of system which will make the…
Since both the 7k Roadmaster Comfort Ride system #RM-2460-2570 and the 8k version part #RM-2460-2580 are designed for 3 inch axles you can use either and in your case the 8k version would be perfectly compatible and give you a little more suspension…
Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…
You will not need any adapter to mount your TV on the MORryde RV Ceiling TV Mount #MR22ZR. Your TV having 10-1/2" from the top to the center of the VESA mounting holes will still have 1" of clearance since the mount is 11-1/2" to the…
Hey Eric, the MORryde RV TV Wall Mount part #MR57RR that you referenced only locks in the upright stored position but in the various lower positions the shocks will hold it at various heights without drifting. It also allows the TV to pivot from side…
With the MORryde Ceiling RV TV Mount #MR22ZR flipped down the space between the ceiling mounting bracket and center of the tv mounting bracket is approximately 9-1/2". When the flipped up the space between the two points is approximately…
Hey David; I checked directly with Pace Edwards for you and can tell you that the rails on the Pace Edwards Switchblade Retractable Hard Tonneau Cover #PE46QJ will protrude just under 3/4" on both sides when installed on your Ford Super Duty…
(12)
(3)
Filter Results
