Videos
for Radiator Fans
Help Articles
for Radiator Fans
Expert Answers
for Radiator Fans
Yes, the Dexstar trailer wheel part #AM20334 will work great on an axle with disc brakes.
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is an approved replacement for 1621 and 1621HD pin boxes.
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and Lippert 1621 HD - 18,000 lbs #325-GH-8040 you were looking at is rated for 18000lbs trailer weight and 3500lbs pin weight, so this will likely be the best option for you as long…
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box - Lippert 1621 and 1621 HD - 18,000 lbs - 3.5K TW #325-GH-8040 weighs 125-lbs. However, after speaking with the tech and warranty department over at Lippert, the Gen-Y pin boxes are not…
view full answer...Because it's lighter, less expensive, has fewer moving parts and is mechanically less complicated I'd recommend…
view full answer...In general the height between the fifth wheel pin boxes aim for the same figures so that they don't cause the trailer to sit drastically different. I attached a dimension picture…
view full answer...The Thule Xsporter Pro Mid Overland Truck Bed Rack #TH34RR is a confirmed fit for your 1998 Ford Ranger and has an overall height of 16" from the bed rail to the top of the crossbar.…
view full answer...DeadBolt Trailer Hitch Receiver Lock #e98882 is stainless steel and made in the USA. It has a span of 2-9/16 inches though. It is the only USA-made stainless steel hitch lock we have.
view full answer...I went out to the warehouse and measured the total depth of the shroud for the Derale #D16925 at 1-1/2". To use this as a puller fan you would reverse polarity and would need to use a…
view full answer...Yes, I can confirm that the Yakima SkyRise HD Tent for Roof Rack Crossbars - 3 Person - 600 lbs - Tan and Red item #Y07437 is compatible with the Thule Xsporter Pro Mid Overland Truck Bed Rack - Aluminum - 600 lbs item #TH34RR. This ladder rack is…
view full answer...Roof racks are rated for dynamic load capacity. A static rating is not provided since it is presumed a rack on a car will be moving. Vehicle roof weight capacities are usually common for all years that are within the same generation. The Current…
view full answer...As you are using the Roadmaster StowMaster Tow Bar #RM-501 you will need the Roadmaster Crossbar-Style Base Plate Kit #RM37RR. The Roadmaster Direct-Connect Base Plate Kit #RM97RR that you found will only work with a direct connect set of tow bars…
view full answer...