Filter Results
Videos
for Trailer Door Hinges
Help Articles
for Trailer Door Hinges
Expert Answers
for Trailer Door Hinges
The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…
view full answer...I would be happy to help you find the correct replacement door hinge for your 2000 Sooner Royale Horse Trailer, but I was unable to find any dimensions or information about the 03139010 hinge you mentioned. Based on the picture you provided it looks…
view full answer...I'm not sure what kind of hingers you had on your trailer but a T-strap hinge like the #PLR2212-AS or #PLR3408-SS is probably your best bet for replacement. I went ahead and attached a link below to all of our available hinges. You can filter…
view full answer...We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…
view full answer...Hello Bee. We do have a few 270 degree strap hinges. Take a look at the Square Corner T-Strap Hinge w/ Reverse Bracket #PLR2212-AS. This is a 12" long 270 degree aluminum hinge. This is going to be a bit longer than the hinge in your picture,…
view full answer...Hi Ben; if you're looking for a traditional gauge on the #GY79FR you aren't going to find one. The tongue weight scale is the red and green marking on the arms as seen in the picture below. The red section at the top indicates your max tongue…
view full answer...To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…
view full answer...The side plates on the 3" Wide Continuous Hinge #MA65VR you found are 0.09" thick which is just under 3/32". We do have a 3" Wide #MA52VR which is 6' Long with a 1/2" pin that has 0.18" thick side plates which is…
view full answer...Hey Jack, If you're talking about a transition plate then you'll want the etrailer Enclosed Trailer Transition Plate #e32JR. This can be installed on either end of the ramp to help make the transition onto easier or at the hinge of the ramp…
view full answer...The closest thing we have to an exact replacement is the 3" Wide Continuous Hinge #PLR843 you looked at. This is 84" long so that is the same as what you have now. The 1/4" difference on the width won't really matter. It is made of…
view full answer...Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…
view full answer...Hey Matt, so it looks like the items you added to your cart are the Timbren Axle Less Kit part #TASR5200S03, Karrier Wheel and Tire part #AM32764, and the wheel part #AM20746. I could be looking at an outdated history of what you have in your cart…
view full answer...
