1. Home
2. Trailer Parts
3. Trailer Door Hinges
4. Hinge Pin Nipplex
5. Build Your Own Hingex

The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…

I'm not sure what kind of hingers you had on your trailer but a T-strap hinge like the #PLR2212-AS or #PLR3408-SS is probably your best bet for replacement. I went ahead and attached a link below to all of our available hinges. You can filter…

Hello Bee. We do have a few 270 degree strap hinges. Take a look at the Square Corner T-Strap Hinge w/ Reverse Bracket #PLR2212-AS. This is a 12" long 270 degree aluminum hinge. This is going to be a bit longer than the hinge in your picture,…

We carry all sorts of RV door parts including hinges and latches that you can see on the linked pages. I included links to hinges, latches and weather-stripping like #WS1434 and vinyl trim like #CAM25103. Since trailer makers do not keep track of…

Hi Ben; if you're looking for a traditional gauge on the #GY79FR you aren't going to find one. The tongue weight scale is the red and green marking on the arms as seen in the picture below. The red section at the top indicates your max tongue…

The side plates on the 3" Wide Continuous Hinge #MA65VR you found are 0.09" thick which is just under 3/32". We do have a 3" Wide #MA52VR which is 6' Long with a 1/2" pin that has 0.18" thick side plates which is…

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

I would be happy to help you find the correct replacement door hinge for your 2000 Sooner Royale Horse Trailer, but I was unable to find any dimensions or information about the 03139010 hinge you mentioned. Based on the picture you provided it looks…

Yes, the H-Channel for Enclosed Trailer #36281-955 can be used for the side door frame on your enclosed trailer. It is specifically designed for building cabinets and doors on a trailer. There is also the 1/16" Thick Tube Trim for Enclosed…

The closest thing we have to an exact replacement is the 3" Wide Continuous Hinge #PLR843 you looked at. This is 84" long so that is the same as what you have now. The 1/4" difference on the width won't really matter. It is made of…

Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2" Deep…

The Ramp Door Hinge #PLR1902 does require welding of both portions. The tab gets welded as you stated to one side and the outside cylinders get welded to the opposite side. I've attached a couple pictures to assist.