Filter Products
Filter by Style of Part
$2.56 - $41.30
Videos
for Trailer Door Latch
Help Articles
for Trailer Door Latch
Expert Answers
for Trailer Door Latch
Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x 1-1/2"…
view full answer...Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of 9" Wide…
view full answer...I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so some…
view full answer...Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a 14". Our smallest off-road tire is the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR. The ST235/75R15 tires are 9.3" wide and…
view full answer...Thanks for the information Scott! The brake assemblies your Sundowner horse trailer uses are item #23-105 for the left hand and item #23-106 for the right hand. The replacement brake shoe you need is item #AKBRKR-S-12. These are sold individually…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459. If you need new mounting bolts and hardware item #BRKH12 will get you set up.
view full answer...Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about 1" closer to any fenders and about 1/2" closer to your trailer frame. Unless you're already strapped for clearance I don't see…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
view full answer...The Paneloc Slam Latch part #F707-104Z011 was not designed to work with a striker plate so there isn't one available for it.
view full answer...The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not have any…
view full answer...According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the manufacturer…
view full answer...Videos
for Trailer Door Latch
Help Articles
for Trailer Door Latch
Expert Answers
for Trailer Door Latch
Thanks for the photos, Audrey! To replace your lower trim we have a few different options, and the correct one just depends on how much of that trim is on the underside of your trailer: - 93-1/2" Long x 3/4" Tall x…
view full answer...Hey Kris, you'll want to measure the length from the very front to the very back of the fender as well as the overall width and height with height being the least important. For example, the part #HP52VR has the dimensions of…
view full answer...I do have an option for you but we don't carry Imperial products. That said, the Side-Door Bar Lock Assembly part #3057-55 would be an excellent replacement for this. The only real difference is the mounting pattern is not the same so…
view full answer...Hello Cale, thanks for getting in touch. We do offer some off-road tires but nothing in a 14". Our smallest off-road tire is the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR. The ST235/75R15 tires are 9.3" wide…
view full answer...Thanks for the information Scott! The brake assemblies your Sundowner horse trailer uses are item #23-105 for the left hand and item #23-106 for the right hand. The replacement brake shoe you need is item #AKBRKR-S-12. These are sold individually…
view full answer...In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
view full answer...You're welcome Scott! For a 6,000 lbs self adjusting brake assemblies you will want the Dexter Nev-R-Adjust Electric Trailer Brakes item #23-458-459. If you need new mounting bolts and hardware item #BRKH12 will get you set up.
view full answer...Thanks for reaching out, Steve! The Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR will be about 1" closer to any fenders and about 1/2" closer to your trailer frame. Unless you're already strapped for clearance I…
view full answer...I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…
view full answer...The Paneloc Slam Latch part #F707-104Z011 was not designed to work with a striker plate so there isn't one available for it.
view full answer...The hinge you referenced part #PLR2212-AS would replace what you have now on your horse trailer and the holes would line up. It looks like for your window you'd need a piano hinge that's about 2 feet long, but at this time we do not…
view full answer...According to the manufacturer the pipe is the 1 inch schedule 40 pipe which means the inner diameter is 1 inch and the outer diameter is 1-5/16" so the attached video and the video are correct. I have also attached a photo from the…
view full answer...