1. Home
2. Trailer Parts
3. Trailer Fenders
4. CE Smithx

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the #F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two…

...Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top...

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

Hi Robert; the top inside length of the Single Axle Jeep Style Trailer Fender #HP96VR is 16". The flat part on the very top is 17" long. I'm sure you already saw it on the product page but the rest of the dimensions are 33" long…

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

Hey Rod, The Ark Xtreme Off-Road Jack w/ 2 Wheels #ARK99FR has multiple slots in the outer tube of the jack that the mounting bracket can slot into. In the bottom slot you'd be right around 9-1/2" between the ground and frame with the wheels…

...trailer fenders. Unfortunately, the only trailer fenders we sell that have a step feature are plastic. For this you will need the CE Smith Single Axle Trailer Fenders part # CE19503-2 for 13" wheels...

The backing plate on the Tandem Axle Teardrop Fenders #HP92VR is 12" down from the top of the fender.

The Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR are made of 16-gauge steel.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Douglas, it looks like the closest we have to what you're looking for is the Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR. These fenders measure 72" x 10 3/4" x 20 1/2", have the backing plates you're looking for, and…

Trailer fenders are classified by the diameter of the trailer wheels they're compatible with. For instance, the #F008583 fender you referenced works with 13 inch diameter wheels. If you're unsure of the diameter of your wheels, the last two…

...Thank you for the photos! According to my information and what you sent in, your best option for a replacement fender is the CE Smith Black Fender: CE Smith Single Axle Trailer Fender w/ Top...

Thanks for the photo. Honestly 5 inches of clearance from the fender to the top of the tire is fine if that is what you desire. We normally recommend 4 inches to allow for the suspension travel whether with leaf springs or torsion axles to allow…

I'd be happy to help you with that. For starters, the #F008584-2 fenders you'd looked at are designed for 14 inch wheels, you'd be better served going with the #F008585-2 which are designed for 15 inch wheels like the ones you have.…

Hi Robert; the top inside length of the Single Axle Jeep Style Trailer Fender #HP96VR is 16". The flat part on the very top is 17" long. I'm sure you already saw it on the product page but the rest of the dimensions are 33" long…

I can understand that if your boat is loaded on the trailer, you don't want to remove one of the wheels to measure the fenders. Measuring a fender with the tire still mounted can be tricky, but it's not impossible. I've provided a diagram…

Hey Rod, The Ark Xtreme Off-Road Jack w/ 2 Wheels #ARK99FR has multiple slots in the outer tube of the jack that the mounting bracket can slot into. In the bottom slot you'd be right around 9-1/2" between the ground and frame with the wheels…

...trailer fenders. Unfortunately, the only trailer fenders we sell that have a step feature are plastic. For this you will need the CE Smith Single Axle Trailer Fenders part # CE19503-2 for 13" wheels...

The backing plate on the Tandem Axle Teardrop Fenders #HP92VR is 12" down from the top of the fender.

The Tandem Axle Teardrop Fenders w/ Backing Plates #HP92VR are made of 16-gauge steel.

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…