1. Trailer Parts
2. Trailer GPS Tracker

The service plan for the Galeo Pro part #GA94FR is offered in three time frames currently: Monthly/yearly/3-year service available from Galeo at $1.99/$19.99/$49.99.

When the battery dies on the Galeo Pro GPS Tracking Device #GA94FR you have to replace the sensor as they do not offer a replacement battery. The battery is hardwired into the unit and not something that can be replaced.

The Galeo Pro GPS Tracking Device with Motion Sensor and Theft Alert #GA94FR will only send an alert to your smart phone through the Galeo app when it detects the trailer has moved per the GPS. It will not detect movement inside the trailer or a…

The Galeo Pro Trailer GPS Tracker #GA94FR has the IP69K water rating you're asking about. I'm not seeing an IP96K listing anywhere either so IP69K is the correct rating.

The Galeo Pro GPS Tracking Device #GA94FR will need the tracking service plan to tell you where the vehicle is. The service plan is what allows the device to communicate over cell service its exact position.

Yes, the Galeo Pro GPS Tracking Device #GA94FR is battery powered and it sends a signal directly from the device so it doesn't require any kind of wiring whatsoever.

The Galeo Pro GPS Tracking Device #GA94FR has a motion sensor built in so it will "ping" the location whenever it moves or senses vibration. You can also press the "Locate" button within the app to get a ping on…

The Galeo Pro GPS Tracking Device #GA94FR will update the location when you press the "Locate" button in the app. Otherwise you will get push notifications when it detects movement so you know when your trailer is being moved around - which…

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

We have the Timbren Axle-Less Trailer Suspension System #A35RD545E you can use to replace your current axle. We do not currently carry a traditional axle that matches your dimensions and one would have to be custom made. This system includes all new…

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

Since the MORryde AllTrek 4000 Equalizers #MR29DR sits inside the middle hanger like a standard equalizer you'd want to use the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. This crossmember will use your wet bolt and come with…