Filter Products
Filter Results
$102.68 - $177.41
$13.57 - $39.42
$93.04 - $93.04
$25.75 - $116.70
Filter by Hitch Size
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Code: 2753
Sturdy steel ball mount with hollow shank measures 9" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Code: 3594
Sturdy steel ball mount with a solid shank measures 10" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Super Titan Dual Ball Mount for 3" Hitches - 2", 2-5/16" Balls - 25,000 lbs
Code: RP38180
To satisfy your multiple towing needs, this dual ball mount for 3" hitches has a 2" hitch ball on one side and a 2-5/16" hitch ball on the other. GTW of 12,000 lbs with 2" ball; 25,000 lbs with 2-5/16" ball. TW is 4,000 lbs.
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Code: 3593
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Code: 36061
Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K
Code: 3592
Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Ball Mount for 2-1/2" Hitches - 1-1/2" Rise, 3" Drop - 10" Long - 18K
Code: RP45322
Sturdy steel ball mount with solid, 1-piece shank measures 10" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Ball Mount - 4-3/4" Rise, 6" Drop - 10-1/4" Long - 6,000 lbs
Code: 40346
Angle-cut design allows the ball mount to slide in your hitch with ease. 6,000 lb capacity. This ball mount provides 10-1/4" of clearance from the hitch pin hole.
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Code: 40332
Sturdy steel ball mount with solid, 1-piece shank measures 10-1/4" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Code: 36051
Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite 2-Ball Mount for 2" Hitches - 2" and 2-5/16" Balls - 16K - Black
Code: 80796
Dual-ball, 8" long ball mount lets you tow up to 10,000 lbs with the 2" ball or 16,000 lbs with the 2-5/16" ball. Solid steel shank provides maximum strength. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
Code: 40330
Sturdy steel ball mount with solid, 1-piece shank measures 8-1/2" from center of hitch pin hole to center of ball hole. Angle-cut shank slides easily into your hitch. Powder coat finish over a-coat base provides excellent rust protection.
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Code: 36071
Sturdy steel ball mount with solid shank measures 7-3/16" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Ball Mount for 3" Hitches - 4" Rise, 6" Drop - 11-1/2" Long - 21K
Code: 40701
Sturdy steel ball mount fits 3" square receiver tube openings and can handle 21,000 lbs towing capacity. Measures 11-1/2" from center of hitch pin hole to center of ball hole. Black powder coat finish provides excellent rust protection.
Draw-Tite Ball Mount for 3" Hitches - 8" Rise, 10" Drop - 11-1/2" Long - 21K
Code: 40703
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Code: 36065
Sturdy steel ball mount with solid shank measures 10" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitches - 4-3/4" Drop - 7-1/2" Long - 3,500 lbs
Code: 36078
Sturdy steel ball mount with solid shank measures 7-1/2" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
Code: 80248
Heavy-duty, sturdy steel ball mount measures 9" from pin hole to ball hole. Use this Class llI accessory in either the drop or rise position to fit your specific application.
Adjustable Ball Mount - 2" Hitch - 7-3/8" Drop, 6-1/8" Rise - 6,000 lbs
Code: 6580
Adjustable ball mount fits 2" trailer hitch receivers and provides up to 7-3/8" drop or 6-1/8" rise to fit your application.
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
Code: 36053
Draw-Tite Ball Mount for 2" Hitch - 5" Rise, 6" Drop - 9-1/2" Long - 12,000 lbs
Code: 4282
Sturdy steel ball mount with solid shank measures 9-1/2" from center of hitch pin hole to center of ball hole. Zinc finish provides excellent rust protection.
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Code: 4283
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 12" Long - 5,000 lbs
Code: 2736
Sturdy steel ball mount with hollow shank measures 12" from center of hitch pin hole to center of ball hole. Powder coat finish over a-coat base provides excellent rust protection.
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 11-3/4" Long - 3,500 lbs
Code: 36063
Sturdy steel ball mount with solid shank measures 11-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.