7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

5-1/4" x 5" Square. Waterproof trailer lights act as brake, tail, turn, side marker, side reflex reflector, rear reflex reflector, and license plate light. Stud mount on trailer - hardware included. 3-Wire pigtail.

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

Waterproof trailer light kit includes 2 combination tail lights and 2 clearance or side marker lights to serve 8 functions on trailers wider than 80". Universal mount with stainless steel hardware. 25' Harness with 4-pole connection.

Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardware

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.

15" x 1-3/8". Low-profile LED tail light serves 3 funtions on trailers over 80" wide. Durable polycarbonate housing and lens. Surface mount - hardware not included. 3-Wire design.

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.

7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.

This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.

7-1/2" x 3-5/16". 3-Function, waterproof light acts as brake, tail, and turn light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Plugs into industry-standard 3-prong plug.

10-5/16" x 4-3/16". LED double dome light illuminates your RV's interior with bright white light. Built-in switch controls on/off function. Snap-on lens. Surface mount - hardware not included. 2-Wire design. 18 Diodes.

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 4 functions: brake, tail, turn, and license plate light. Built-in license plate bracket. Snap-on lens. Mounts on surface of trailer. 3-Wire pigtail.

7-9/16" x 3-5/16" Oval. 3-Function, waterproof LED light acts as brake, tail, and turn signal. Durable polycarbonate housing and lens. Surface mount with built-in flange - hardware not included. 3-Wire design.

8-11/16" x 3-3/16" Rectangle. Low-profile RV light serves 3 functions: brake, tail, and turn light. Snap-on lens. Mounts of surface of trailer. 3-Wire pigtail.

150' L x 2" W; alternating red/silver reflector tape; DOT certified; rated for 5 years use. Use this durable, technologically advanced conspicuity tape roll to highlight your truck or trailer. 6" Silver/6" red pattern, perforated.

Trailer kit with 2 stud mount tail lights; 2 stud mount amber clearance lights; license plate bracket; wire harness w/4-pole connector

10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.

2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Red lens. PC rated.

8-5/8" x 3-3/16" Rectangle. Incandescent RV light serves 3 functions: brake, tail, turn. Surface mount. 3-Wire pigtail. Red acrylic lens. Black ABS plastic base.

18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use

7-9/16" x 3-5/16" Oval. Waterproof, LED trailer tail light with 6 diodes provides stop, turn, and tail function. Durable polycarbonate housing and lens. Surface mount with built-in flange. 3-Wire design.