Trailer Lights   >    Clearance Lights   x   >  

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.

14-1/4" Long x 1-3/16" tall x 1-5/16 deep. Waterproof identification light bar with 3 replaceable red 3-LED lights is designed for trailers wider than 80". Polycarbonate lens and stainless steel base. Surface mount. Male 0.180 bullet.

2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Red lens. PC rated.

2-1/2" x 1-3/16" Rectangle. Waterproof trailer light functions as both a clearance light and a side marker light when properly mounted. Requires mounting bracket and plug (both sold separately) for installation. Amber lens. PC rated.

2-1/8" x 1-1/8" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable polycarbonate lens and housing. Stud mount to trailer. Single wire design. P2 rated.

3-3/4" x 1-5/8" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

3-15/16" x 1-1/4". Waterproof LED marker light can be installed on your trailer fender. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Hardwired with 1-prong plug. P2 rated.

3-3/4" x 1-5/8" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

5-3/8" x 1-13/16" Teardrop. Waterproof, incandescent trailer light serves as a clearance or side marker light. Built-in reflex reflector. Surface mount - hardware not included. 1-Wire design. P2 Rated.

4-1/2" x 2" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable steel housing protects light. Surface mount to trailer. 2-Wire design. PC rated.

2-7/8" x 2-1/8" Square. LED trailer light functions as a clearance or side marker light when properly mounted. Built-in reflex reflector. Durable ABS housing with black base. Surface mount - hardware not included. 2-Wire design. P2 rated.

2-1/2" x 1-3/16". Waterproof mini trailer light functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. P2 rated.

3-15/16" x 1-7/8" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Built-in reflector. Durable ABS base. Twist-in bulb socket. Surface mount - hardware not included. 2-Wire design. P2 rated.

4-1/2" x 2" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light when properly mounted. Durable steel housing protects light. Surface mount to trailer. 2-Wire design. PC rated.

14-1/4" Long x 1-1/8" wide x 7/8" deep; sealed, waterproof, 1-piece housing and lens; surface mount on 8-1/2" centers; 2-wire design; 3 red LEDs; red lens.

2-1/8" x 1-1/8". Waterproof LED trailer light functions as a clearance or side marker light. Sealed circuit board protects against water damange. Stud mount with stainless steel hardware. 1-Wire design with 19" lead. PC rated.

8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.

8-1/4" x 3-1/4". Incandescent marker light mounts on your trailer fender. Built-in reflex reflector. Amber light faces front, and red light faces rear. Surface mount to trailer with bracket. Pre-wired design. (2) 194 bulbs.

3-15/16" x 1-1/4". Waterproof, incandescent trailer marker light mounts on your trailer fender. Amber light faces front, and red light faces rear. Mounts to trailer with bracket (sold separately). Accepts 1-prong or 2-prong plug. P2 rated.

6" x 2-1/4" Rectangle. Waterproof trailer light functions as both a side marker light and turn signal. Amber polycarbonate lens. 16 LEDs. Surface mount on 4-13/16" centers - hardware not included. 3-Wire pigtail. P2 rated.

2" Diameter round. Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 2-prong plug. P2 rated.

16-1/2" Long x 1-3/8" tall. Waterproof identification light bar with 3 lights is designed for trailers wider than 80" Durable stainless steel base. Surface mount to trailer - hardware not included. 2-Wire design with 50" leads.

4-3/16" x 1-3/8" Oval. Waterproof, LED trailer light serves as either a side marker light or clearance light. Miro-flex reflector increases light output. Surface mount - hardware not included. 2-Wire design. P2 rated.