Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Stud mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers wider than 80". Surface mount - hardware included. 3-Wire pigtail.

This waterproof identification light bar with 3 lights is 15-15/16" long and designed for trailers wider than 80". Durable polycarbonate housing and lens. Surface mounts to trailer - hardware not included. 2-Wire design. DOT approved.

10-1/8" x 3-1/16" Oval. 4-Function, waterproof light acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface with built-in flange - hardware not included. 4-Wire pigtail. 14 Diodes.

7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.

Waterproof trailer light kit includes 2 combination tail lights that serve 7 functions on trailers under 80" wide. Universal mount with stainless steel hardware and included license plate bracket. 25' wiring harness with 4-pole connector.

5-15/16" x 4-13/16" Rectangle. LED work light produces a bright white light. Flood beam illuminates a wide area. TCS technology optimizes performance based on temperature. Durable aluminum housing and impact-resistant lens. Pedestal mount.

This 17' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. 300 Diodes produce a bright white light. Cut-to-fit installation with peel-and-stick adhesive backing. Hardwires to any 12V power source.

13-5/8" x 10-7/8" Rectangle. LED utility light illuminates an exterior area with bright white light. Durable aluminum construction with powder coat resists corrosion. Mounts flush to exterior trailer wall.

Trailer kit with 2 stud-mount, submersible tail lights; corrosion-resistant license-plate bracket; 2 amber side marker and clearance lights; 25' wiring harness with 4-pole connector; mounting hardware

Waterproof trailer light kit includes 2 combination tail lights and 2 clearance or side marker lights to serve 8 functions on trailers wider than 80". Universal mount with stainless steel hardware. 25' Harness with 4-pole connection.

14" x 6-7/8" Rectangle. Triple trailer light provides stop, turn signal, tail, and backup light functions. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. Pre-wired design.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 5 functions: brake, tail, turn, rear reflex, and side marker. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug

7-1/2" x 3-1/4" Oval. Waterproof light serves 4 functions: brake, tail, turn, and backup light. Red lens is set inside of clear lens. Mounts on surface of trailer with built-in flange - hardware not included. 4-Wire pigtail. 16 Diodes.

15-1/2" x 9-1/2" Rectangle. Black molded frame holds your trailer's standard size license plate. Built-in LED light illuminates plate. Mounts on surface of trailer - hardware included. 2-Wire pigtail.

6-7/16" x 2-1/8" Oval. Waterproof LED trailer tail light functions as a stop, tail, and turn signal light. Durable polycarbonate housing and lens. Recessed mount with grommet (sold separately). Accepts standard 3-prong plug (not included).

This 16' LED light strip has a weatherproof exterior that makes it perfect for indoor or outdoor use. Cut-to-fit installation with peel-and-stick 3M adhesive backing. Hardwires to any 12V power source.

RV puck light recesses into the ceiling of your RV to provide you with a sleek, low profile look that other puck lights won't give you. Warm white LEDs are more energy-efficient, last longer, and burn brighter than incandescents.

7-3/4" x 3-1/8" Rectangle. Waterproof trailer tail light serves 6 functions: brake, tail, turn, reflex, side marker, and license plate light. Durable polycarbonate lens and housing. Surface mount to trailer. 3-Prong molded plug.

3-3/4" x 1-5/8" Oval. Trailer light with reflector functions as a clearance or side marker light. Durable polycarbonate base and lens. Mounts on surface of trailer - hardware not included. 2-Wire pigtail. P2 rated.

8-5/8" x 3-1/4" x 2-5/16". Waterproof trailer light illuminates your license plate. Durable ABS housing. Clear lens under polycarbonate housing. Surface mount on 3-1/2" centers with included bracket. 2-Wire design. 5 Diodes.

Use integrated switch or wire to a light switch to turn this double dome light on and off. Perfect for brightening up your RV kitchen when doing dishes or your enclosed trailer when loading gear. LEDs last longer and burn brighter than incandescents.

Waterproof clearance/marker light can be installed on either your driver's-side or passenger's-side trailer fender. Amber light faces front, and red light faces rear. Surface mount with durable ABS plastic base. 2-Wire pigtail. P2 rated.

20-1/2" x 1". 4-Function, waterproof light bar acts as brake, tail, turn, and backup light. Red lens set inside clear lens. Mounts to trailer surface - hardware not included. 4-Wire pigtail. DOT compliant. 19 Diodes.