1. Home
2. Trailer Parts
3. Trailers
4. Tow Dollyx
5. Cars/Trucks/SUVsx

I reached out to my contact at Demco and he said that the Kar Kaddy SS #DM9713045 can be assembled by 1 person and that it typically takes about 3-4 hours. If you are a retired auto mechanic then it will likely be on the lower end as you have…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Demco has an interesting way to determine if the Kar Kaddy X #DM9713093 would provide enough ground clearance for a vehicle like your 2006 Mini Cooper to load. You will need to measure from where the front wheel touches the ground on front side of…

Hey Steve, thank you for the insight into your installation of the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 on your 2024 Jeep Wrangler Unlimited! We try to get as much info on our site for future users to see, but sometimes the small…

Hey Gary, I'm not sure where you're seeing the discrepancy, but it looks like the correct orientation is to put the U-Bolt behind the spring (if I'm understanding you correctly). I've attached a photo of the Roadmaster Reflex RV…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hey Russell, thanks for reaching out! Sounds like you're needing the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches #e98881, which has a keyed alike option on the product page and is made in the USA. Just change the option to…

Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional…

Hello Matt; the Kuat NV 2.0 Base Bike Rack for 2 Bikes #BA22B may obstruct the sensors in your rear bumper but it will depend on your hitch. The bike rack has a built-in 3-1/2" rise from the shank so depending on where the receiver sits it may…

Yes, the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel - 5 on 4-1/2 #AM30030 is a substitute for the Spare Tire for Malone EcoLight Trailer #MAL33FR. Both tires are capable of being used on the Malone EcoLight Trailers #MAL53FR,…

Hi Steve! The easiest thing to do would be to use the Blue Ox Adjustable Drop Hitch Receiver Adapter #BLU48CR and the etrailer Magnetic Hitch Receiver Reducer Sleeve #e28JR so I recommend going that route. The only advantage you'll see from…

Hey Steve, thanks for reaching out again! Hopkins doesn't have any exceptions for their Wiring Kit #HM39VR which normally means it's compatible, but even though this is easier to install than a lot of the other options, from my experience I…