How to Install an RV Awning From Scratch

One of the best parts of RVing is enjoying the outdoors. However, a glaring summer sun or a light shower can keep you on the inside looking out—and probably looking at all those other campers lounging under the protection of their awnings.

Luckily, just because your RV didn't come with an awning doesn't mean you can't add one yourself. This can sound like an intimidating project, but it's actually easier than you'd think. See for yourself—watch an installation demonstration below, or check out our step-by-step guide to installing an RV awning to get started.

Shop RV awnings or read on to learn:

What Parts Do I Need to Install an Awning?
How To Install an RV Awning from Scratch

What Parts Do I Need to Install an Awning?

Awning Kits vs. Separate Parts

The first step when installing an RV awning is to—well, have an awning to install (tip: it also helps if you have an RV). If you don't have an awning to install, you can either purchase an awning kit, which will come with most of the parts you need (minus an awning rail extrusion in most cases), or you can purchase the parts separately.

In most cases, we recommend purchasing the awning kit to save yourself the trouble of piecing your setup together. However, you may want to buy the parts separately if you want a custom size or color. We offer awning kits in popular sizes and colors—16-ft., 18-ft., and 20-ft., with black or white fade canopies. If you wish to piece together a custom setup, our roller and fabric kits range in size from 10-ft. to 21-ft. wide, with 4 color options.

NOTE: Make sure to check all dimensions for parts you purchase to ensure they will fit on your RV!

Parts included in our RV awning kits:

Outer arm
Inner arm
Pitch arm
Roller tube
Canopy
Wall-mounted bracket

Hand-crank models also include a crank wand.

You will need to purchase an awning rail extrusion, sold separately. Check the product description for your kit to determine which part number you need.

If you buy the parts individually, you will need:

Tip: Measuring for the Rail Extrusion

Your awning rail extrusion should equal the length of your awning (measured center of arm to center of arm), plus several additional inches. This is necessary in order to support the tension on the awning material. The length of rail needed varies by awning model. Check your product's description or manufacturer's instructions to determine the required length.

As an example, many Solera awnings require 6 inches of rail extrusion on on each side of the awning (so 1 foot total). For instance, if your awning will be 14 feet long, you'll need a 15-foot rail extrusion.

Our awning rails come in 8-foot sections, so you'll want to make sure you round up when ordering. In our example above, you would need two 8-foot awnings for your 15-foot extrusion. The rails could then be cut to size and fitted together in the center of the awning.

Manual vs. Electric/Powered Awnings

A big part of purchasing an awning kit or parts is deciding which type of awning you want to install. There are four main awning styles available, including pull-style (in which you pull a strap to open the awning), hand-crank (in which you rotate a rod to open the awning), hardwired (which have a motor and must be wired to the RV), and battery-powered (which have a motor and do not require hardwiring). So which should you choose? The answer depends on personal preference and budget.

Manual Awnings

If you go with a manual awning, we recommend going with a newer-style, hand-crank awning (rather than the pull-style type). These awnings open by means of a rod that hooks into the drive head and is rotated to extend/retract the awning.

Pros: Manual awnings are easy to adjust and are typically a bit sturdier than their powered counterparts. They also work no matter what—you don't need a power source to open or close them. These awnings are also more economical, so if you're fixing up your RV on a budget, hand-crank manual models are a great choice.

Cons: Manual awnings are not as convenient and easy to open as powered awnings. However, with new advancements in RV awning design, manual awnings have become much easier to use (for instance, with hand-crank operation).

Featured: A pull-strap manual awning (left) and hand-crank awning (right).

Powered Awnings

Powered awnings can either be hardwired in or battery-operated (the battery-operated models are easier to install).

Pros: Convenience! Powered awnings can be extended or retracted with the push of a button. Some even retract automatically once they detect high winds, so you don't have to scramble to retract it when you feel the breeze kick up.

Cons: The convenience of a powered awning only applies if you have power (powered awnings come with a manual override in case of a power outage, but that really defeats the purpose). Powered awnings typically aren't as sturdy in strong winds. They also cost more, though sometimes this price gap is relatively small (in many cases less than $200) for what you are already paying for an awning. Powered awnings can also be harder to install, though battery-powered models eliminate the need for hardwiring.

Featured: A battery-operated awning.

How To Install an RV Awning from Scratch

Watch a quick video demonstration on installing an RV awning, or go step by step through our guide below.

NOTE: The following installation was completed using the Solera 14' Awning Roller and Fabric # LCV000223179, the Universal Awning Conversion Kit for Solera Hybrid Awnings # LC434726, and the Solera Rail Extrusion # LC281928. Solera is one of the most popular RV awning brands. Although the general process will be the same for most awnings, installation procedure varies by manufacturer and model. Always check any manufacturer's instructions to ensure proper installation.

Install an RV awning (video demonstration)

Step 1

Place butyl tape # CAM25013 along the back of your extrusion rail. The butyl tape will help keep out moisture and prevent leaks.

Step 2

With a helper, hold the extrusion rail against the RV in the location of your choice. Make sure the ends are lined up evenly. Secure with a self-tapping screw on both sides and in the center. Double check that the rail is level, then add screws to the remaining holes in the rail.

If your awning requires wall brackets, you can install those now as well. Mark the bracket locations as specified in the manufacturer's instructions, then secure the bracket with screws.

NOTE: If placing an awning over your door, make sure you achieve the proper amount of clearance, as indicated by the manufacturer's instructions. Manual awnings typically require a greater clearance than powered awnings. Also be sure your arm and rail placement will not interfere with vents, lights, speakers, etc.

As always, be sure to check the instructions for your specific model.

Step 3

Attach the roller to the arms by sliding the post at the top of the arm (in the head assembly) into the hole drilled into the roller.

Make sure the holes in the roller and arm are aligned, then secure with screws. Do the same on both sides.

Step 4

You'll want a few helpers for this step! Have two people hold the awning against the side of the RV and slowly walk it down while a third person feeds the fabric into the rail track. Make sure to keep the arms parallel to one another so you don't damage the unit.

Pro-tip: If necessary, use a screwdriver or other tool to pry open the awning extrusion track on one side. Be careful not to cut yourself or snag the awning—the edges of the track will be sharp (you can file the edges down if needed). Use a silicone lubricant in the track to ease installation.

Step 5

Make sure the arms are level. Put one screw into each side to hold things in place. Then add another screw on each side to further secure the awning.

Step 6

Extend your awning. With the awning extended, you can install the rest of your hardware on the awning arms. Secure the arms' lower mounting holes to the RV with screws, then do the same for the middle holes. Use butyl tape or silicone sealant to prevent leaks.

Or, if your model uses wall brackets, lock each foot in the bracket you previously installed.

Step 7

Use screws to secure all available mounting locations at the top of the arms.

Step 8

Roll the fabric back up to ensure there are no wrinkles and that the fabric doesn't bunch up. Once you are satisfied, use a self-tapping screw at the ends of the track channel where the fabric lies in place. This will prevent the fabric moving on the track and bunching up at one end or the other.

Step 9

Enjoy your new awning!

Still have questions?

Give our experts a call at 800-298-8924, or contact us online. We're happy to assist any way we can!

Save or Share This Idea:

Recommended Supplies List

Complete Awning Kit
- Wall-mounted bracket
- Outer arm
- Inner arm
- Pitch arm
- Roller tube
- Canopy
- Crank wand (for hand-crank models)
Rail Extrusion
Butyl tape and/or silicone sealant
Silicone lubricant

Related Products

Shop Awning Repair Tape

Shop Awning Clamps

Shop Screen Rooms

Written by: Amber S.

Updated on: 1/4/19

Awnings C.

5/13/2024

Awesome post! This article breaks down the process into simple steps, making it accessible even for beginners. From measuring to mounting, every detail is covered, ensuring a smooth installation process. Many Thanks!

Mike L.

5/24/2024

@AwningsC You're very welcome, we're glad you liked it!!

Tim J.

2/16/2023

Which brand is best?

Jon G.

10/18/2023

@TimJ We only carry the Solera brand awnings at this point in time (October 2023) so while I don't have in-depth insight into other brands and how they compare directly with what we have, I can say that it isn't uncommon for people with other brands to upgrade their awning setup with Solera as opposed to getting direct replacements.

Bailey

7/11/2022

Wondering from start to finish how long it takes to install a new awning, we currently don't have any, so not just replacing the fabric. We are installing the entire thing. Anybody know how long this takes from start to finish to accomplish? And how many people you need to get this project done? Thank you!

David B.

7/12/2022

Bailey, I talked with my installers and they are telling me if you take your time and do it correctly by the book you will need about 4-5 hours and at least two people. Do you know what size of awning you need? If not I can help, if you do just get a trusty buddy and a nice Saturday afternoon and you'll have it up no problem.

7/8/2022

I'm wondering about anchoring a brand new awning to the rv. How do you know you are screwing into studs or the frame and not just the thin rv wall? I imagine the top screws would be at the frame but what about the middle and bottom holes? Could large rivets be used?

David B.

7/8/2022

If you will look at the linked answer page you can see that you can use rivets.

Helpful Links

question-549037.html?fb=yes

Jaymie

4/19/2022

Question... Wr are new to RV with a 2014 Minnie Winnie 31H. We have an awning for the front part. My question is can a manual awning be applied to the back slide-out? That way we can have shade for the entire passage side of the MH. Thanks

David B.

4/20/2022

That's going to be a tough one my friend. The arms of your current awning on the 31H are to close to the slide out to install a second awning next to it. The only other way to do it would be to remove your current awning and replace it with a full length awning and that in itself will have inherent problems. I honestly think it would be best to not do it for fear of damages that will most likely happen to the awning.

Jaymie

4/20/2022

@DavidB Thank you, We will just go with a pop up tent for shade if needed. Your response was helpful and timely.

Jeff D.

4/26/2022

@Jaymie There may be a way. I have a 2019 Forester bunkhouse model and have a bunk slide on the rear of the passenger side. Our to this the awning on my unit is only 11ft. In doing research I found the Carefree Pioneer manual awning. It comes in custom lengths, besides the standard ones. They also have a short arm kit for it. If the short arms fit the height of your slide wall it may be able to be done. One good thing about it is it's a crank style and the whole unit weighs around 25 to 30 pounds so it should not put any stress on the slide wall itself.

See All (4) Replies to Jaymie ∨

Show All (7) Replies

Hide Replies

Explore Expert Info

on RV Awnings

Videos

for RV Awnings

Help Articles

for RV Awnings

Expert Answers

for RV Awnings

Installation Guide for the Solera RV Slide-Out Awning on a 2019 Keystone Impact 5W Toy Hauler

Hands-On with the High Pointe Built-In Convection Microwave with Air Fryer

Breaking Down the Hellwig Rear Anti-Sway Bar-HE56GR

Review of Thomas Payne Power Cord - RV Sofa Power Cord - 195-000111

Comprehensive Review: Timbren Suspension Enhancement System-T94VR

Roadmaster Rear Anti-Sway Bar-RM-1109-167: The Breakdown

In-Depth Review of the TorkLift Camper Packer Camper Stand Kit

All You Need to Know About the Electric Jack w/ Footplate and 7-Way Plug

Dexter E-Z Flex Suspension Kit: The Breakdown

Ultimate Overview of the Thule HideAway Awning

In-Depth Review of the Rhino-Rack Sunseeker Awning

Solera 12V Electric RV Awning Conversion Kit: The Breakdown

Replacing RV Awning Fabric: Your Step-by-Step DIY Guide

Converting Your RV Water Heater to Tankless

How (and Where) to Connect an RV Propane Grill

Brake Controller 7- and 4-Way Installation Kit (ETBC7)

How to Raise Your Travel Trailer Height

How to Measure for Trailer Hitch Drop

Beginner's Guide to RV Awnings: How to Open, Close, and Maintain Your Awning

RV Roof Types: What Type of Roof Does My RV Have?

4-Step Guide to Installing RV Solar Power

How to Strap a Kayak to a Roof Rack in 4 Steps (With Pictures)

5 Tips to Confidently Choose Your Weight Distribution Hitch

2 Steps for Finding the Right Weight Distribution Hitch Size

Installation of Solera Manual Pull Style to Power Awning Conversion

The Solera Manual Pull Style to Power Awning Conversion Kit, Black #LC329251 will simply require changing the heads on your awning frame and then wiring the unit. I've attached the photo from the installation manual that specifies how to wire…

view full answer...

Does The Solera Replacement Fabric #LCV000211483 Have A Built-In Metal Cover

Hey Dennis, The Replacement Roller and Fabric Kit for 15' Solera Power and Hybrid RV Awnings #LCV000211483 doesn't have any kind of built-in cover unfortunately. There are fabric options with an extra layer of material like the…

view full answer...

High Pointe Built-In Convection Microwave HP36ZR - What Are The Dimensions Of The Trim Piece?

Hello Dennis. The trim piece for the High Pointe Built-In Convection Microwave measures 24" wide by 17" tall. I made a diagram for you which I have included below.

view full answer...

What to Measure to Get Correct Roller and Awning Kit

That's a good question, and what you want to do is measure the roller bar assembly as opposed the fabric. For example if you measure the roller assembly and it is 15 feet you can use the Solera 15' White Fade RV Awning Roller and…

view full answer...

Solera 15' Awning Availability As a Kit For Installing Entire Awning

Yes, we have some 15' awnings but they are not currently available as a single kit. The Solera 15' Black Fade RV Awning Roller and Fabric (Std) #LCV000211480 can be paired with either the Solera 12V Power RV Awning Conversion Kit…

view full answer...

Fabric Construction of Solera 15' Sand Fade w/ Black Weather Guard RV Awning #LCV000223162

I spoke with my contact at Lippert to see if I could get some specifics regarding the fabric construction on the Solera 15' Sand Fade w/ Black Weather Guard RV Awning #LCV000223162 that you referenced. She stated that the fabric on this unit is…

view full answer...

Solera Awning Arms Upgrades To Convert Manual Awning To Power Or Crank Awing

To switch to a crank or powered awning you will need to change the end caps on your manual Solera Awning as well as remove the torsion spring. I recommend using the Solera 18V Power RV Awning Conversion Kit #LC434730 as this kit contains everything…

view full answer...

Solera Universal 69" Awning Support Arms for RVs Hybrid In the Color White

Yes the Solera Universal 69" Awning Support Arms for RVs - Hybrid part #LC434727 is available in white with part #LC434728.

view full answer...

Converting Solera Power Awning to Manual

Yes, you could convert your Solera power awning to a manual crank awning with the Crank Awning Conversion kit part #LC333411. This kit normally converts a pull style awning to power but will work great for your application as well.

view full answer...

Are Support Brackets for 16' Awning Larger Than a 15.5' Awning

From the center line to center line of the brackets for the Solera 12V XL Power RV Awning - 16' Wide - Extra-Long 9'8" Projection - White Fade #LCV000334965-362241 it measures 16' as you can see in the attached photo. When I reached…

view full answer...

2020 Ram 2500 Frame-Mounted Camper Tie-Downs and Turnbuckles

The TorkLift Custom Frame-Mounted Camper Tie-Downs, #TLD2140 and #TLD3113, front and rear will fit your 2020 Ram 2500, tie-down inserts, frame brackets, and all necessary hardware is included. As for turnbuckles there is a wide selection at varying…

view full answer...