Base plates are the first piece of a five-part puzzle: base plates, tow bar, wiring, safety cables and braking systems. Base plates are the only part of the puzzle that is vehicle specific. A dinghy, or vehicle being towed, requires custom-designed base plates that specifically fit its frame.
Roadmaster Base Plate Styles
Roadmaster base plates are made in two styles - quick disconnect and direct connect. These styles differ in how the tow bars connect to them.
Roadmaster Quick Disconnect Style Base Plate
Quick disconnect style base plates have arms that terminate in a flat surface. Roadmaster tow bars (both quick disconnect and direct connect) can be attached to this style base plate. Each type of tow bar uses a crossbar and quick disconnect hardware to attach to these base plates, although the crossbar os the Tracker model can be bolted directly to the base plates for a more permanent connection.
Roadmaster Base Plate Differences
Classic - Old style design without removable arms
XL - Removable arms held in place with pin and clips
EZ and EZ2 - Removable arms twist-lock into place
EZ4 - Removable arms are spring loaded and twist-lock into place
Roadmaster Direct Connect Style Base Plate
The arms of direct connect style base plates terminate with a set of two tabs that receive the lugs at the ends of the tow bar arms. The tow bar arms can be easily positioned then connected with pins. Roadmaster's coupler style tow bars - Stowmaster and Tracker - will not work with these base plates.
Roadmaster Base Plate Differences
MS - Arms are not removable
MX - Removable arms held in place with pins and clips
EZ5 - Removable arms are spring loaded and twist-lock into place
Design and Construction
Consist of two main parts:
Frame Bracket(s)
Mounts directly to the dinghy's frame
Drawbar arms
Are either welded to the frame brackets or removable
Provide attachment points for the tow bar
Install on dinghy's frame using as many existing attachment points as possible without sacrificing strength and safety
When multiple base plate kits are available for a specific vehicle, they will install in similar ways, using the same points on the frame. The differences lie in the drawbar type and whether the base plates come as one or two pieces.
The type of base plates available for any given vehicle depends on the vehicle's frame type
Larger vehicles can have base plates brackets that come as two separate pieces because the vehicle frame is strong enough to handle the stresses of towing
Smaller vehicles may come with a one-piece bracket to reinforce the vehicle frame for towing
Designed for vehicles with heavy-duty frames (trucks and SUVs)
Removable drawbar arms
Arms of base plates attach directly to the telescoping tow bar arms
Does not require crossbar or quick disconnects
Speeds up hooking-up process
Looks better than standard, XL or EZ base plate connection
The drawbar arm is a two-prong fork that a pin is inserted through to attach the plates to the tow bar arm
Not compatible with accessories that require quick disconnects
Compatible with Roadmaster motor-home-mounted tow bars
Connecting Roadmaster Base Plates to Tow Bars
There are three ways that base plate arms can be connected to the tow bar. The type of connection depends on the type of base plates you have.
Standard, XL and EZ base plates
Use quick disconnects to conveniently attach the drawbar to the tow bar crossbar
Quick disconnects come as two parts: Half of the quick disconnect bolts to the crossbar of the tow bar; the other half bolts to the base plate
After initial installation, you can connect the tow bar by sliding the tow bar and drawbar arm quick disconnects together and securing them with a pin and clip
Bolt the base plate drawbar arms directly to the tow bar crossbar
Each time you attach the tow bar to the base plates, the crossbar and drawbar arms must be bolted together
MS and MX base plates
Conveniently attach drawbar arms directly to the tow bar arms using a pin and clip
Simplest hookup
Does not require intermediate quick disconnects or crossbar
Base Plate AdapterA tow bar adapter allows a tow bar to work with base plates from a different manufacturer. So, for example, you can use a Blue Ox tow bar to tow a dinghy that has Roadmaster base plates
The tow bar side of an adapter has prongs that correspond to the tow bar attachment points
The dinghy side of an adapter has connection points that correspond to the base plate attachment points
If you have a Roadmaster product, there is a great way to think about the adapters and to figure out which one you need
Determine which part of your towing set up is from Roadmaster. Depending on which part is from Roadmaster, the type of adapter needed will fall into one of two categories:
Adapters to Roadmaster base plates
These adapters convert a tow bar from a different manufacturer, like Blue Ox or Valley, to work with Roadmaster base plates
All adapters that convert a tow bar to work with Roadmaster base plates require quick disconnects to link the two products
Some adapters come with quick disconnects. You may need to purchase quick disconnects separately.
Adapters from Roadmaster towbars to base plates from a different manufacturer
Allows Roadmaster tow bar to tow a dinghy with base plates from a different manufacturer (e.g., Blue Ox or Demco)
Adapters connect directly to the telescoping arms of the Roadmaster tow bar
The Roadmaster tow bar crossbar is removed and replaced with the adapter
Pins and clips attach the adapter to the Roadmaster tow bar arms and to the base plates
There are no adapters available for the standard Stowmaster and Tracker tow bars
Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…
Thanks for reaching out, Kirk! One of the things that Blue Ox does a great job of is showing photos of what their base plates will work with. I'm attaching a photo in the instructions of the Blue Ox Base Plate Kit #BLU85CR. In these instructions…
I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…
When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…
Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…
Since you have a 2011 Mini Cooper Convertible S model you can use Roadmaster base plates #521879-1A. They are compatible with Quick Disconnects (found on some Roadmaster tow bars) and all Roadmaster tow bars. Base plates #521880-1 do not fit the…
Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…
The Stromberg Carlson #LA-401BA has a hinge that can be installed where the two ladder pieces join, which can help with any odd shapes on the rear of your coach. These are typically used on travel trailers but they can also be used on Class A or…
If you are using the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord part #BX88206 which it sounds like you are then you will need to attach the 12 volt power wire from the vehicle's battery to the terminal in the 1 o'clock position on the…
To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…
Your Rangefinder II Tow Bar BX4322 has a unique attachment system and the only adapter kit we have to match it are the Roadmaster Base Plates Adapters #RM-037. The adapters aren't compatible with the etrailer Invisible Base Plate Kit #e98949…
Hey Michael, For your 2014 Jeep Wrangler and Roadmaster Falcon 5250 tow bar I recommend the Roadmaster Direct-Connect Base Plate Kit #RM-521448-5. This fits with your factory bumper and you can remove the crossbar adapter on the tow bar and just…
"Very easy process, good prices and my products were shipped on time and were delivered on time. The instructional videos online helped make installation easy!"