Lift Supports Specs:
Features:
Install this torsion bar between your truck bed and tailgate to make it easy for you to raise and lower the tailgate on your truck. The EasyLift ensures controlled movement so that you can access your truck bed with just one hand.
Tech Tip:
Product does not work on models with tailgate assist feature.
More Information >Gas Struts Specs:
Features:
If your vehicle's hood keeps closing while you're trying to work on your engine, it's time to change your strut. Replace it with this custom fit gas strut and make your hood operate like new again. Quick, tool-free installation.
More Information >Lift Supports Specs:
Features:
DeeZee's tailgate-lowering system is the safe way to lower your vehicle's heavy tailgate. Expertly designed and built to last, Tailgate Assist controls the drop of your tailgate, preventing injuries and making loading and unloading easier.
More Information >Videos
for Lift Supports
Help Articles
for Lift Supports
Expert Answers
for Lift Supports
Hey thanks for reaching out, Robert. Your Dexter P-15 model SLR 3,500 lb axle does use the standard bearing combination for a 3,500 lb axle. I was able to confirm this with Dexter. So, you have #L68149 for the inner bearing and #L44649 for the outer…
view full answer...I have included a video that briefly goes over installing the Hopkins EasyLift Truck Bed Tailgate Lift Assist #74211 but we do not have a video that goes over the entire installation process. As you can see in the video you will need to drill a hole…
view full answer...Hi Scott; the Bulldog Round, A-Frame Jack #BD155033 you were looking at is the best replacement for your 1551060301. This jack has the same 2,000 lb capacity, topwind handle, and 15" travel you have now. If you want the caster wheel again you…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Hello Michael, thanks for getting in touch. The Replacement Extang Trifecta 2.0 Tonneau Cover #EX92480-20 is indeed for the 2020 Ford F-150 XLT with the 6.5' bed. This is the replacement tarp for the Extang Trifecta 2.0 part #EX92480 which is for…
view full answer...The Air Lift LoadLifter 5000 #AL88200 will work with the Air Lift Air Helper Spring Cradle #AL59DQ on your 2013 Ford F-150. The cradle actually replaces the lower roll plate so the air bag will sit directly in the cradle. I'm not sure how much of…
view full answer...Hi Robert; the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100 is the correct bearing kit for your axle.
view full answer...Hey Jason, so we don't have the Hopkins tailgate assist part #74211 listed as a fit for your 2011 Ford F-350 but we do have the DeeZee part #DZ43203 as a fit.
view full answer...The biggest difference between the two Redarc brake controllers is that the Tow-Pro Elite #RED44FR has a proportional control and user controlled mode you can switch between, while the Tow-Pro Liberty #RED24FR has just the proportional mode. The…
view full answer...Hey Dell, We do have a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover #EX83VR that fits your 2021 Ford F-150 with a 5-1/2' bed, but it's actually a different part number than the one you mentioned. Instead, the right…
view full answer...The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…
view full answer...You are correct that is a 3,500 lb axle. If you want a bearing kit the #BK2-100 you looked at is the right one. This comes with a #L44649 outer and #L68149 inner bearing along with a #58846 (10-19) grease seal. If you want a replacement idler hub you…
view full answer...Filter Products (3)