Most Popular Hayes
Videos
for Hayes
Help Articles
for Hayes
Expert Answers
for Hayes
We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…
view full answer...I wasn't able to research a ton about the Atwood OD5001CW Direct Water Heater but I think we still have a great option for you in the Furrion RV Tankless Water Heater part #FR93FR which installs into a opening between 12 5/8”- 12 3/4” tall x 12…
view full answer...3500 lb axles have the most common and most consistent spindle sizes. They are typically 1.73 inches at the seal, 1.38 inches at the inner bearing and 1.06 inches at the outer bearing like #TRU24FR. I've attached a video to assist. I've…
view full answer...Ford Replacement OEM Tow Package Wiring Harness #118243 is not confirmed to fit the 2003 Ford F-250 Super Duty. But what you could do is use #40167 which is a fit. It is basically an in-bed 5th wheel/gooseneck 7-Way that Tees in with the factory…
view full answer...Yes, the lighting functions of a trailer 7-way will be fully functional regardless of if a brake controller is installed/functional. The circuits are totally separate. There are many people who use 7-way trailer wiring setups without a brake…
view full answer...To add brakes and the wiring to support their operation to your 5 x 8 cargo trailer you'll want to make sure the brakes have the correct rating for your axle (which you did) and also that they use the same mounting bolt pattern as your installed…
view full answer...I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…
view full answer...The 12V wire at the vehicle-end trailer connector being hot even when the truck is off can vary depending on the application. For all aftermarket hardwiring installations of a 7-Way wiring harness, the 12V wire will be hot at all times, even when the…
view full answer...If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…
view full answer...Yes, the red light on the Hayes Syncronizer Trailer Brake Controller #HA81725 will come on whenever you apply your tow vehicle's brakes, even when no trailer is connected. However, no power is used when there isn't a trailer detected.
view full answer...
What our customers are saying:
"These arrived yesterday and are EXACTLY what I was looking for. Thanks for the excellent service!"