We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV…
You can wire a license plate light like part #LPL55CB without running wiring up to the front of the trailer. You simply attach the white wire with the ring terminal to a clean, bare metal surface like the trailer frame, and then attach the black…
The Gas Shock #372-7901 you were looking at would attach to a 10mm ball stud, but I have no way of knowing if the shock in your photo would connect to 10mm ball without physically testing it.
I spoke with my contact at Dutton-Lainson and he stated that the 203960B number that you pulled from your jack is a label number. That label was used on two different trailer jacks with a 1250 lb weight capacity, sidewind jack #6814 and topwind…
No you don't need to add an additional regulator when using the Camco Brass Propane Tee part #CAM59113 with a grill that has a built-in regulator. There will need to be a regulator on the line that runs to the RV but it sounds like you…
There are some great solutions for hooking your barbecue grill up to the propane supply on your 2020 Winnebago Vista. My guess is that the hose you have has a male quick-disconnect to a 1 pound disposable cylinder fitting, similar to…
To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find the…
The 2057 and 1157 bulbs are interchangeable with the difference being the brightness. The 1157 is just slightly brighter than the 2057. For a replacement 1157 we have the #A1157B which would work great and would be your best option.
The Atwood 15,000 Btu AC units with the heat pumps are actually meant for ducted configurations. Since you're wanting one that is for a non-ducted application you need the Advent Air RV Air Conditioner w/ Air Distribution Box, Start Capacitor,…
Since your Grand Design 17MKE has a GVWR of 6,395 lbs, you more than likely have 3,500 lb axles. That being the case, the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2560 will not fit your travel trailer. Although Roadmaster does not…
I spoke with my contact at Lippert and for your trailer axle, you will want to use the etrailer.com Trailer Hub and Drum Assembly #AKHD-655-35-K. This will serve as a perfect replacement for your existing assemblies, with the same inner/outer…
In order to hook up a Blackstone Tailgater to the quick disconnect port on the side of a trailer you should be able to use the MB Sturgis RV Quick-Connect Propane Grill Hose part #100304-60-MBS or part #100304-120-MBS. I called Blackstone and they…
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"