Videos
for Durabilt
Help Articles
for Durabilt
Expert Answers
for Durabilt
Hey Alex, I agree that Draw-Tite beefs up their safety chain loops quite a bit compared to most manufacturers so I went out to the warehouse and test-fit the Durabilt Safety Chain Connectors #DU35QR on the loops of the #41944 and found that they are…
view full answer...Hi Alan; as long as you don't have the factory OEM wheel liners you can use the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front and Rear Set #WT66MV on your 2025 Sierra 1500 Denali Ultimate.
view full answer...I definitely understand how safety chain capacities and determining exactly what chain rating you need for your trailer can be a bit confusing. To keep it as simple as possible, safety chain requirements state that the breaking strength of EACH…
view full answer...I sure do and yes they are! The holes are spaced 1-1/4" apart on center for both the BulletProof Hitches Weight Distribution Shank item #BPH85RR and the Blue Ox SwayPro Weight Distribution System item #BXW2000 so they are indeed compatible.
view full answer...The 12,000 lb weight rating of the Durabilt Safety Chain Connectors #DU35QR is individually as well as both of them. It's a little confusing, but essentially you don't double the weight rating of these types of connectors when more than one…
view full answer...Hey George, The pins included with the Titan Chain Mid Link #TCML8 are stamped G70 grade, whereas the pins from the Durabilt Double Clevis Link #DU82RR are not. The pins on the Durabilt are what is bringing down the WLL rating. After holding both in…
view full answer...The bolt head and nuts on either side of the Durabilt Ratchet Chain Binder item #DU63MR are 1".
view full answer...Hi Ronald; yes, the BulletProof Hitches Shackle for Trailer Safety Chains #358smallshackle will work. They have a capacity of 6,500 lbs so your 4,500 lb trailer won't be a problem.
view full answer...The biggest difference is the size of the ramps. The Flint Hill Goods #FHG23ZR ramps are 6' long and 14-1/2" wide for each ramp. The Stallion #288-07489 ramps are 65" long and 20-1/2" wide for each ramp. The Stallion ramps are only…
view full answer...Thanks for the question, Chris! The Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT66GR is confirmed to fit all models of the 2022 Ford Explorer so it will definitely fit the ST-Line you're asking about. If you'll be doing any towing be…
view full answer...So after quite a bit of research it seems that the Trostel 300-156-6 seals you mentioned are quite old and have not been around for some time. The best I could find was that they are 3.00" in outer diameter, and I did manage to find a customer…
view full answer...Hey Gary, so a charger like the NOCO Genius Multi Bank Smart Charger part #NOC24FR would work great to keep both of your batteries topped off and charged when in storage as this was designed for charging two batteries.
view full answer...
What our customers are saying:
"Your internet site is very well organized and easy to use...My order was shipped very promptly and included everything I ordered...All in all this was a simple procedure for what can be a complicated order. I would use your company again or recommend you to others. Your selection was broad and your prices fair."