Videos
for Fastway
Help Articles
for Fastway
Expert Answers
for Fastway
Hey Paul, I spoke with Curt and they stated that the Replacement Trunnion Spring Bar for Curt TruTrack Weight Distribution System #C17535 would only be compatible with the #C17499. The Curt TruTrack 4P Trailer Mounted Weight Distribution System w/…
view full answer...The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…
view full answer...Hey Paul, the most similar weight distribution shank we have to the part #RP69FR that fits a 2-1/2 inch hitch is the part #BPH75RR which fits the same heads as the Reese shanks so it will also work with same heads.
view full answer...It is possible to upgrade your Fastway e2 Round bar weight distribution system by using higher rated spring bars. I assume you have the 600 lb system, part #FA92-00-0600, so you can upgrade to a 800 lb tongue weight or 1,000 lb tongue weight…
view full answer...Hey Lucas, The Curt MV #C17050 is for total tongue weights between 500 lbs and 600 lbs only (600 lbs isn't actually the minimum), and for a 5,000 lb GVWR camper, the tongue weight is definitely going to exceed what this hitch is capable of. Your…
view full answer...Tongue weight is typically between 10% -15% of your trailer's total weight so with the 800 lbs spring bars you're already over their capacity. I recommend upgrading to the 1,000 lbs Round Spring Bar for Fastway e2 Weight Distribution Systems…
view full answer...The difference between the two systems is basically the attachment point. One is not better than the other except that the trunnion bars are a little easier to install than the round bars that require a clip to hold them into the head. For the round…
view full answer...Mike, since the Fastway Universal Coupler Lock #FA86-0015-316 is universal it will also work with your Demco Hydraulic Brake Actuator #DM72VR.
view full answer...Hi Susan, You can just swap out the spring bars with the Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems #FA92-01-0899 (8,000/800) or #FA92-01-1099 (10,000/1,000) or #FA92-01-1299 (12,000/1,200) if you switch to a heavier…
view full answer...The Fastway e2 weight distribution (WD) 8,000 lb and 10,000 lb systems do use the same head units so you can easily use the 1,000 lb Trunnion Bars #FA92-01-1099 or 2 of the Rounds Bar #FA94-02-1099 with your current setup depending on which you have.…
view full answer...The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…
view full answer...Thanks for reaching out, Winston! If the 880 lb rating is fully loaded then the 1,000 lb Bar #FA92-02-1099 would be what I recommend since it gives you a tongue weight range of 600 lbs - 1,000 lbs. If that 880 lb rating is unloaded then you'll…
view full answer...
What our customers are saying:
"Excellent service both on the phone asking for information and the web. Look forward to recieving the item.... Thanks"